For the most Static RAM the maximum access time is about a) 1ns b) 10ns
c) 100ns
d) 1μs

1 Answer

Answer :

b) 10ns

Related questions

Description : For the most Static RAM the write pulse width should be at least a) 10ns b) 60ns c) 300ns d) 1μs

Last Answer : b) 60ns

Description : Which term is used to describe RAM? a. Dynamic RAM (DRAM) b. Static RAM (SRAM) c. Video RAM (VRAM) d. All of the above

Last Answer : d. All of the above

Description : Which RAM is created using MOS transistors: a. Dynamic RAM b. Static RAM c. Permanent RAM

Last Answer : a. Dynamic RAM

Description : Which type of RAM needs regular referred: a. Dynamic RAM b. Static RAM c. Permanent RAM d. SD RAM

Last Answer : a. Dynamic RAM

Description : The ram which is created using bipolar transistors is called: a. Dynamic RAM b. Static RAM c. Permanent RAM d. DDR RAM

Last Answer : b. Static RAM

Description : Which of the following memories has the shortest access times? a. Cache memory b. Magnetic bubble memory c. Magnetic core memory d. RAM

Last Answer : a. Cache memory

Description : The memory which is programmed at the time it is manufactured a. POM b. RAM c. PROM d. EPROM

Last Answer : a. POM

Description : A typical personal computer used for business purposes would have… of RAM. a. 4 KB b. 16 K c. 64 K d. 256 K

Last Answer : d. 256 K

Description : Which is the type of memory for information that does not change on your computer? a. RAM b. ROM c. ERAM d. RW / RAM

Last Answer : b. ROM

Description : which chips using special external equipment can reprogram a. ROM b. PROM c. SAM d. RAM

Last Answer : b. PROM

Description : A memory that is capable of determining whether a given datum is contained in one of its address is a. ROM b. PROM c. CAM d. RAM

Last Answer : c. CAM

Description : Which of the following memories allows simultaneous read and write operations? a. ROM b. RAM c. EPROM d. None of above

Last Answer : b. RAM

Description : The silicon chips used for data processing are called a. RAM chips b. ROM chips c. Micro processors d. PROM chips

Last Answer : d. PROM chips

Description : The two kinds of main memory are: a. Primary and secondary b. Random and sequential c. ROM and RAM d. All of above

Last Answer : c. ROM and RAM

Description : In linear decoding address bus of 16-bit wide can connect only ____ of RAM. a. 16 KB b. 6KB c. 12KB d. 64KB

Last Answer : b. 6KB

Description : Which of the following instruction perform the move accumulator to external RAM of 16bit address? a) MOV @ DPTR, A b) MOVX @ Ri, A c) MOV A, @ Ri d) MOVX @ DPTR, A

Last Answer : c) MOV A, @ Ri

Description : Which of the following instruction perform as of indirect RAM to accumulator? a) MOV A, Rn b) MOV @Ri, A c) MOV A, @Ri d) MOV Rn, A

Last Answer : c) MOV A, @Ri

Description : The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Last Answer : a) 8 byte, on-chip 128 byte RAM.

Description : In 8279 Status Word, data is read when ________ pins are low, and write to the display RAM with ____________ are low. a) A0, CS, RD & A0, WR, CS. b) CS, WR, A0 & A0, CS, RD c) A0, RD & WR, CS d) CS, RD & A0, CS.

Last Answer : c) A0, RD & WR, CS

Description : ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Last Answer : c) 7H

Description : Total Air Temperature is: a. The maximum temperature attainable by the air when brought to rest, adiabatically b. The temperature indicated on the air temperature thermometer plus the ram rise c. The static air temperature minus the recovery factor d. The recovery factor plus the ram rise

Last Answer : a. The maximum temperature attainable by the air when brought to rest, adiabatically

Description : Total Air Temperature is: a. The maximum temperature attainable by the air when brought to rest, adiabatically b. The temperature indicated on the air temperature thermometer plus the ram rise c. The static air temperature minus the recovery factor d. The recovery factor plus the ram rise

Last Answer : a. The maximum temperature attainable by the air when brought to rest, adiabatically

Description : A storage device whe3re the access time is depended upon the location of the data is a. Random access b. Serial access c. Sequential access d. Transaction access

Last Answer : b. Serial access

Description : A type of core store that has a lower access time than the devices used for working store in the same processor is known as a. Core memory b. Buffer c. Fast core d. Address register

Last Answer : d. Address register

Description : The two basic types of record-access methods are a. Sequential and random b. Sequential and indexed c. Direct and immediate d. On-line and real time

Last Answer : a. Sequential and random

Description : Access time is a. seek time + latency time b. seek time c. seek time – latency time d. latency time

Last Answer : a. seek time + latency time

Description : Access time is faster for a) ROM b) SRAM c) DRAM

Last Answer : b) SRAM

Description : Memory access in RISC architecture is limited to instructions a. CALL and RET b. PUSH and POP c. STA and LDA d. MOV and JMP

Last Answer : c. STA and LDA

Description : A 32-bit address bus allows access to a memory of capacity(a) 64 Mb (b) 16 Mb (c) 1Gb (d) 4 Gb 2.Which processor structure is pipelined? a) all x80 processors b) all x85 processors c) all x86 processors

Last Answer : c) all x86 processors

Description : Offline device is a. A device which is not connected to CPU b. A device which is connected to CPU c. A direct access storage device d. An I/O device

Last Answer : a. A device which is not connected to CPU

Description : One of a class of storage device devices that can access storage locations in any order is a. DTE b. DASD c. DDE d. DDE

Last Answer : b. DASD

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : b. Access arm

Description : Any method for controlling access to or use of memory is known a. Memory map b. Memory protection c. Memory management d. Memory instruction

Last Answer : b. Memory protection

Description : Which of the following is a way to access secondary memory? a. Random access memory b. Action method c. Transfer method d. Density method

Last Answer : a. Random access memory

Description : The magnetic storage chip used to provide non-volatile direct access storage of data and that have no moving parts are known as a. Magnetic core memory b. Magnetic tape memory c. Magnetic disk memory d. Magnetic bubble memory

Last Answer : a. Magnetic core memory

Description : The instructions for starting the computer are house on a. Random access memory b. CD-Rom c. Read only memory chip

Last Answer : c. Read only memory chip

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : d. All of above

Description : Which of the following is not true for a magnetic disk? a. It is expensive relative to magnetic tape b. It provides only sequential access to stored data c. Users can easily update records by writing over the old data d. All of above

Last Answer : b. It provides only sequential access to stored data

Description : Offline device is a. A device which is not connected to CPU b. A device which is connected to CPU c. A direct access storage device d. An I/O device

Last Answer : a. A device which is not connected to CPU

Description : Magnetic disks are the most popular medium for a. Direct access b. Sequential access c. Both of above d. None of above

Last Answer : c. Both of above

Description : The DMA controllers are special hardware embedded into the chip in modern integrate processor that ____and_____ to the system; a. Data transfer b. arbitrate access c. Both A and B d. None of these

Last Answer : c. Both A and B

Description : DMA stands for: a. Dynamic memory access b. Data memory access c. Direct memory access d. Both B and C

Last Answer : d. Both B and C

Description : DMA stands for: a. Direct memory access b. Direct memory allocation c. Data memory access d. Data memory allocation

Last Answer : a. Direct memory access

Description : Which term is used to describe RAM? A) Dynamic RAM (DRAM) B) Static RAM (SRAM) C) Video RAM (VRAM) D) All of the above

Last Answer : Answer : D

Description : Which of the following memories must be refreshed many times per second? A) Static RAM B) Dynamic RAM C) EPROM D) ROM

Last Answer : Answer : B

Description : Which of the following memories must be refreshed many times per second? a. Static RAM b. Dynamic RAM c. EPROM d. ROM

Last Answer : b. Dynamic RAM

Description : Which term is used to describe RAM? a. Dynamic RAM (DRAM) b. Static RAM (SRAM) c. Video RAM (VRAM) d. All of the above

Last Answer : d. All of the above

Description : Which term is used to describe RAM? a. Dynamic RAM (DRAM) b. Static RAM (SRAM) c. Video RAM (VRAM) d. All of the above

Last Answer : d. All of the above

Description : Which of the following memories must be refreshed many times per second? (1) ROM (2) Dyanamic RAM (3) EPROM (4) Static RAM

Last Answer :  Dyanamic RAM