The reason a CSMA/CD network has a minimum length for packets is:

The reason a CSMA/CD network has a  minimum length for packets is:
by

1 Answer

Answer :

to make  sure all other nodes hear a collision in  progress
by

Related questions

Packets which is self – contained and travels through the network independent of other packets of the same message by whatever means available

Description : Packets which is self – contained and travels through the network independent of other packets of the same message by whatever means available

Last Answer : Datagram

The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Last Answer : b. 250 bytes

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

A _______ is a three-layer device that handles packets based on their logical addresses

Description : A _______ is a three-layer device that handles packets based on their logical addresses

Last Answer : router

To prevent _________, we can timestamp the packets and separate the arrival time from the playback time

Description : To prevent _________, we can timestamp the packets and separate the arrival time from the playback time

Last Answer : jitter

Transmission system for a multidrop network A. Taken passing B. Polling C. Switching D. CSMA/CD

Description : Transmission system for a multidrop network A. Taken passing B. Polling C. Switching D. CSMA/CD

Last Answer : B. Polling

Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocolc. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Description : Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocol c. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Last Answer : CSMA/CD is not suitable for a high propagation delay

A theory that establishes the minimum sampling rate that can be used for a given PCM systems.

Description : A theory that establishes the minimum sampling rate that can be used for a given PCM systems.

Last Answer : Nyquist sampling theorem

A theory that establishes the minimum sampling rate that can be used for a given PCM systems

Description : A theory that establishes the minimum sampling rate that can be used for a given PCM systems

Last Answer : Nyquist sampling theorem

It is used to encode the minimum amount of speech information necessary to reproduce a perceptible message with a fewer bits that those needed by a conventional encoder/decoder

Description : It is used to encode the minimum amount of speech information necessary to reproduce a perceptible message with a fewer bits that those needed by a conventional encoder/decoder

Last Answer : vocoders

The minimum optical power a light detector can receive and still produce a usable electrical output signal.

Description : The minimum optical power a light detector can receive and still produce a usable electrical output signal.

Last Answer : light sensitivity

It is the ratio of the transmission bit rate to the minimum bandwidth required for a particular modulation scheme

Description : It is the ratio of the transmission bit rate to the minimum bandwidth required for a particular modulation scheme

Last Answer : Bandwidth efficiency, Information density, or Spectral efficiency

A system where the modulated RF picture and sound carrier signals are distributed in a cable network, instead of wireless system.

Description : A system where the modulated RF picture and sound carrier signals are distributed in a cable network, instead of wireless system.

Last Answer : CATV

It is proposed network designed by major telephone companies in conjunction with the ITU-T with the intent of providing worldwide telecommunications support for voice, data, video and facsimile information within the same networ

Description : It is proposed network designed by major telephone companies in conjunction with the ITU-T with the intent of providing worldwide telecommunications support for voice, data, video and facsimile information within the same networ

Last Answer : ISDN

It is logically equivalent to making telephone call through the DDD network except no direct end-to-end connection is made

Description : It is logically equivalent to making telephone call through the DDD network except no direct end-to-end connection is made

Last Answer : Virtual call

In IPv6, when a datagram needs to be discarded in a congested network, the decision is based on the _______ field in the base header.

Description : In IPv6, when a datagram needs to be discarded in a congested network, the decision is based on the _______ field in the base header.

Last Answer : priority

Congestion in a network or internetwork occurs because routers and switches have _______

Description : Congestion in a network or internetwork occurs because routers and switches have _______

Last Answer : queues

____ is a virtual-circuit wide-area network that was designed in response to demands for a new type of WAN in the late 1980s and early 1990s.

Description : ____ is a virtual-circuit wide-area network that was designed in response to demands for a new type of WAN in the late 1980s and early 1990s.

Last Answer : . Frame Relay

____ is a process-to-process protocol that adds only port addresses, checksum error control, and length information to the data from the upper layer.

Description : ____ is a process-to-process protocol that adds only port addresses, checksum error control, and length information to the data from the upper layer.

Last Answer : UDP

The size, shape, and dielectric material of a waveguide must be constant throughout its length for energy to move from one end to the other without reflections. What could be the effect in any abrupt change in its size or shape?

Description : The size, shape, and dielectric material of a waveguide must be constant throughout its length for energy to move from one end to the other without reflections. What could be the effect in any abrupt change in its size or shape?

Last Answer : Reflections.

A mode where the entire magnetic field is in the transverse plane and has no portion parallel to the length axis.

Description : A mode where the entire magnetic field is in the transverse plane and has no portion parallel to the length axis.

Last Answer : TM mode

Classification of protocol that interprets a frame of data as a group of successive bit combined into predetermined pattern of fixed length, usually 8 bits each.

Description : Classification of protocol that interprets a frame of data as a group of successive bit combined into predetermined pattern of fixed length, usually 8 bits each.

Last Answer : Character and Byte-oriented protocols

In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400 bytes?

Description : In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400 bytes?

Last Answer : 428

Ethernet is baseband system using CSMA/CD operating at A. 20 Mbps B. 10 Mbps C. 30 Mbps D. 40 Mbps

Description : Ethernet is baseband system using CSMA/CD operating at A. 20 Mbps B. 10 Mbps C. 30 Mbps D. 40 Mbps

Last Answer : B. 10 Mbps

In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Description : In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Last Answer : CSMA/CA

In_______, collisions are avoidedthrough theuse of three strategies: the interframe space, the contention window,and acknowledgments. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In_______, collisions are avoidedthrough theuse of three strategies: the interframe space, the contention window,and acknowledgments. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CA

Toavoid collisions on wireless networks, ________was invented. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : Toavoid collisions on wireless networks, ________was invented. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CA

In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CD

__________ augments the CSMA algorithm todetect collision. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b

Description : __________ augments the CSMA algorithm todetect collision. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b

Last Answer : CSMA/CD

The _____sublayer is responsible for the operation of the CSMA/CD access method and framing. A) LLC B) MII C) MAC D) none of the above

Description : The _____sublayer is responsible for the operation of the CSMA/CD access method and framing. A) LLC B) MII C) MAC D) none of the above

Last Answer : MAC

The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Last Answer : 1-persistent

In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Description : In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Last Answer : c. Jam

Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Description : Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Last Answer : c. Both CSMA/CD & CSMA/CA

In _______, collisions are avoided through the use of three strategies: the interframe space, the contention window, and acknowledgments. A. CSMA/CA B. CSMA/CD C. either (a) or (b)D. both (a) and (b)

Description : In _______, collisions are avoided through the use of three strategies: the interframe space, the contention window, and acknowledgments. A. CSMA/CA B. CSMA/CD C. either (a) or (b) D. both (a) and (b)

Last Answer : A. CSMA/CA

Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Description : Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Last Answer : C. Both CSMA/CD & CSMA/CA

Explain the terms topology and access methods used in LANs. Discuss the CSMA/CD and CSMA/CA protocols.

Description : Explain the terms topology and access methods used in LANs. Discuss the CSMA/CD and CSMA/CA protocols.

Last Answer : (i) LAN topologies: Network topology is a physical schematic which shows interconnection of the many users. There are four basic topologies as under:  (a) Direct Connection or one to all ... it is free, the station transmits, and waits for an acknowledgment signal that the packet was received

Explain CSMA/CD and CSMA/CA.

Description : Explain CSMA/CD and CSMA/CA.

Last Answer : CSMA- resolving the media contention. Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Listen for Data Transmission on Cable (Carrier Sense) When Medium is free a) Transmit ... time, and transmit again. Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) Nov/Dec

What is CSMA/CD?

Description : What is CSMA/CD?

Last Answer : Carrier Sense Multiple Access with Collision Detection (CSMA/CD) When a station has a frame to transmit: 1) Listen for Data Transmission on Cable (Carrier Sense) 2) When Medium is Quiet (no ... for Collision. b) If collision is heard, stop transmitting, wait random time, and transmit again.

LAN? a) CDMA b) CSMA/CA c) ALOHA d) CSMA/CD

Description : LAN? a) CDMA b) CSMA/CA c) ALOHA d) CSMA/CD

Last Answer : b) CSMA/CA

Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4

Description : Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4

Last Answer : c. IEEE 802.3

The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___

Description : The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___

Last Answer : is horizontal

It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power

Description : It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power

Last Answer : directive gain

The property of interchangeability for the transmitting and receiving operations is known as ____

Description : The property of interchangeability for the transmitting and receiving operations is known as ____

Last Answer : reciprocity

The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space

Description : The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space

Last Answer : radiation field

It is the ratio of the radiated to the reflected energy:

Description : It is the ratio of the radiated to the reflected energy:

Last Answer : Radiation efficiency

It is the resistance that, if it replaced the antenna, would dissipate exactly the same amount of power that the antenna radiates

Description : It is the resistance that, if it replaced the antenna, would dissipate exactly the same amount of power that the antenna radiates

Last Answer : . Radiation resistance

Plots of field strength or power density with respect to the value at a reference point.

Description : Plots of field strength or power density with respect to the value at a reference point.

Last Answer : relative radiation pattern

The radiation pattern plotted in terms of electric field strength or power density

Description : The radiation pattern plotted in terms of electric field strength or power density

Last Answer : absolute radiation pattern

The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____

Description : The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____

Last Answer : line of shoot