In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

In Ethernet CSMA/CD, the special bit
sequence transmitted by media access
management to handle collision is called
a. Preamble
b. Postamble
c. Jam
d. None of the above
by

1 Answer

Answer :

c. Jam
by

Related questions

The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Last Answer : 1-persistent

Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocolc. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Description : Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocol c. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Last Answer : CSMA/CD is not suitable for a high propagation delay

In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CD

__________ augments the CSMA algorithm todetect collision. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b

Description : __________ augments the CSMA algorithm todetect collision. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b

Last Answer : CSMA/CD

What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Description : What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Last Answer : a. 1 byte

In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Description : In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Last Answer : CSMA/CA

The _____sublayer is responsible for the operation of the CSMA/CD access method and framing. A) LLC B) MII C) MAC D) none of the above

Description : The _____sublayer is responsible for the operation of the CSMA/CD access method and framing. A) LLC B) MII C) MAC D) none of the above

Last Answer : MAC

Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Description : Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Last Answer : c. Both CSMA/CD & CSMA/CA

Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Description : Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Last Answer : C. Both CSMA/CD & CSMA/CA

Ethernet is baseband system using CSMA/CD operating at A. 20 Mbps B. 10 Mbps C. 30 Mbps D. 40 Mbps

Description : Ethernet is baseband system using CSMA/CD operating at A. 20 Mbps B. 10 Mbps C. 30 Mbps D. 40 Mbps

Last Answer : B. 10 Mbps

In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Last Answer : CRC

In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Last Answer : preamble

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

In_______, collisions are avoidedthrough theuse of three strategies: the interframe space, the contention window,and acknowledgments. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In_______, collisions are avoidedthrough theuse of three strategies: the interframe space, the contention window,and acknowledgments. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CA

Toavoid collisions on wireless networks, ________was invented. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : Toavoid collisions on wireless networks, ________was invented. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CA

The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Last Answer : b. 250 bytes

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

In _______, collisions are avoided through the use of three strategies: the interframe space, the contention window, and acknowledgments. A. CSMA/CA B. CSMA/CD C. either (a) or (b)D. both (a) and (b)

Description : In _______, collisions are avoided through the use of three strategies: the interframe space, the contention window, and acknowledgments. A. CSMA/CA B. CSMA/CD C. either (a) or (b) D. both (a) and (b)

Last Answer : A. CSMA/CA

Explain CSMA/CD and CSMA/CA.

Description : Explain CSMA/CD and CSMA/CA.

Last Answer : CSMA- resolving the media contention. Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Listen for Data Transmission on Cable (Carrier Sense) When Medium is free a) Transmit ... time, and transmit again. Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) Nov/Dec

What is CSMA/CD?

Description : What is CSMA/CD?

Last Answer : Carrier Sense Multiple Access with Collision Detection (CSMA/CD) When a station has a frame to transmit: 1) Listen for Data Transmission on Cable (Carrier Sense) 2) When Medium is Quiet (no ... for Collision. b) If collision is heard, stop transmitting, wait random time, and transmit again.

Explain the terms topology and access methods used in LANs. Discuss the CSMA/CD and CSMA/CA protocols.

Description : Explain the terms topology and access methods used in LANs. Discuss the CSMA/CD and CSMA/CA protocols.

Last Answer : (i) LAN topologies: Network topology is a physical schematic which shows interconnection of the many users. There are four basic topologies as under:  (a) Direct Connection or one to all ... it is free, the station transmits, and waits for an acknowledgment signal that the packet was received

In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : unicast

Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Last Answer : a. Half the baud rate.

Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

Automatic repeat request error management mechanism is provided by ________ a. logical link control sublayer b. media access control sublayerc. network interface control sublayer d. application access control sublayer

Description : Automatic repeat request error management mechanism is provided by ________ a. logical link control sublayer b. media access control sublayer c. network interface control sublayer d. application access control sublayer

Last Answer : a. logical link control sublayer

Automatic repeat request error management mechanism is provided by ________ A. logical link control sublayer B. media access control sublayer C. network interface control sublayer D. application access control sublayer

Description : Automatic repeat request error management mechanism is provided by ________ A. logical link control sublayer B. media access control sublayer C. network interface control sublayer D. application access control sublayer

Last Answer : A. logical link control sublayer

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Description : An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Last Answer : Frame check sequence

The RTS and CTS frames in CSMA/CA ____ solvethe hidden stationproblem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem. A) can; cannot B) cannot; can C) can; can D) cannot; cannot

Description : The RTS and CTS frames in CSMA/CA ____ solvethe hidden stationproblem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem. A) can; cannot B) cannot; can C) can; can D) cannot; cannot

Last Answer : can; cannot

________ requires that each station first listento the medium before sending. A) MA B) CSMA C) FDMA D) CDMA

Description : ________ requires that each station first listento the medium before sending. A) MA B) CSMA C) FDMA D) CDMA

Last Answer : CSMA

In ______, the chanceof collisioncan be reduced if a station senses the medium beforetrying touse it. A) MA B) CSMA C) FDMA D) CDMA

Description : In ______, the chanceof collisioncan be reduced if a station senses the medium beforetrying touse it. A) MA B) CSMA C) FDMA D) CDMA

Last Answer : CSMA

The vulnerable timefor CSMA is the ________propagationtime. A) the sameas B) two times C) three times D) none of the above

Description : The vulnerable timefor CSMA is the ________propagationtime. A) the sameas B) two times C) three times D) none of the above

Last Answer : the sameas

What is CSMA/CA?

Description : What is CSMA/CA?

Last Answer : ∙ CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) is a protocol for carrier transmission in 802.11 networks. ∙ CSMA/CA acts to prevent collisions before they happen. ∙ In CSMA/CA, as soon as a node receives a packet that is to be sent, it checks to be sure the channel is clear.

In a star-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is the collision point.

Description : In a star-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is the collision point.

Last Answer : a passive hub

Transmission system for a multidrop network A. Taken passing B. Polling C. Switching D. CSMA/CD

Description : Transmission system for a multidrop network A. Taken passing B. Polling C. Switching D. CSMA/CD

Last Answer : B. Polling

The reason a CSMA/CD network has a minimum length for packets is:

Description : The reason a CSMA/CD network has a minimum length for packets is:

Last Answer : to make sure all other nodes hear a collision in progress

LAN? a) CDMA b) CSMA/CA c) ALOHA d) CSMA/CD

Description : LAN? a) CDMA b) CSMA/CA c) ALOHA d) CSMA/CD

Last Answer : b) CSMA/CA

Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4

Description : Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4

Last Answer : c. IEEE 802.3

the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Description : the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Last Answer : b. 2^(n-1)

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

Bit stuffing refers to a. inserting a 0 in user stream to differentiate it with a flagb. inserting a 0 in flag stream to avoid ambiguity c. appending a nipple to the flag sequence d. appending a nipple to the use data stream

Description : Bit stuffing refers to a. inserting a 0 in user stream to differentiate it with a flag b. inserting a 0 in flag stream to avoid ambiguity c. appending a nipple to the flag sequence d. appending a nipple to the use data stream

Last Answer : a. inserting a 0 in user stream to differentiate it with a flag

The subnet gets increasingly loaded with packets causing increase in delay in the delivery of packets, which can lead to more retransmission, and ultimately increasing more and more traffic. This is a concept called as _________ A. blockage B. Traffic jam. C. Congestion D. both a and b

Description : The subnet gets increasingly loaded with packets causing increase in delay in the delivery of packets, which can lead to more retransmission, and ultimately increasing more and more traffic. This is a concept called as _________ A. blockage B. Traffic jam. C. Congestion D. both a and b

Last Answer : C. Congestion

What is the latest write-once optical storage media? a. Digital paper b. Magneto-optical disk c. WORM disk d. CD-ROM disk

Description : What is the latest write-once optical storage media? a. Digital paper b. Magneto-optical disk c. WORM disk d. CD-ROM disk

Last Answer : Magneto-optical disk

Which of the following areadvantagesof CD-ROM as a storage media? (A) CD-ROM is aninexpensive way to store large, amount of data and information (B) CD-ROM disks retrieve data and information more quickly than magnetic disks do (C) CD-ROMs make lesserrors than magnetic media (D) An of the above (E) None of these

Description : Which of the following areadvantagesof CD-ROM as a storage media? (A) CD-ROM is aninexpensive way to store large, amount of data and information (B) CD-ROM disks retrieve data and information more quickly than ... (C) CD-ROMs make lesserrors than magnetic media (D) An of the above (E) None of these

Last Answer : An of the above