Description : Which of the following is not a factor in cable light loss? ∙ A. reflection ∙ B. absorption ∙ C. scattering ∙ D. dispersion
Last Answer : A. reflection
Description : The dominant loss mechanisms in silica fiber are ∙ a. Absorption and radiation losses ∙ b. Absorption and Rayleigh scattering ∙ c. Coupling and radiation losses ∙ d. Radiation and modal dispersion
Last Answer : b. Absorption and Rayleigh scattering
Description : Which of the following is not a factor in cable light loss? ∙ a. Reflection ∙ b. Absorption ∙ c. Scattering ∙ d. Dispersion
Last Answer : ∙ a. Reflection
Description : The loss in signal power as light travels down a fiber is called ∙ a. Dispersion ∙ b. Scattering ∙ c. Absorption ∙ d. Attenuation
Last Answer : ∙ d. Attenuation
Description : It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion
Last Answer : A. modal dispersion
Description : The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering
Last Answer : A. separating light into its component frequencies
Description : Reflections in many directions ∙ a. Diffuse reflection ∙ b. Diffraction ∙ c. Scattering ∙ d. Dispersion
Last Answer : a. Diffuse reflection
Description : Dispersion can be expressed in units of ____________________ rather than
Last Answer : time
Description : In multimode fiber, ____________________ index has less dispersion than step index.
Last Answer : graded
Description : Chromatic dispersion is also called ____________________ dispersion.
Last Answer : intramodal
Description : The upper pulse rate and information-carrying capacity of a cable is limited by ∙ A. pulse shortening ∙ B. attenuation ∙ C. light leakage ∙ D. modal dispersion
Last Answer : D. modal dispersion
Description : The operation of a fiber-optic cable is based on the principle of ∙ A. refraction ∙ B. reflection ∙ C. dispersion ∙ D. absorption
Last Answer : A. refraction
Description : The time it takes a light induced carrier travel across the depletion region of the semiconductor. ∙ A. dispersion ∙ B. response time ∙ C. irradiance ∙ D. transit time
Last Answer : D. transit time
Description : It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency
Last Answer : A. Bandwidth Distance Product
Description : How can modal dispersion reduced entirely? ∙ A. Use a graded index fiber ∙ B. Use a single-mode fiber ∙ C. Use a monochromatic light source ∙ D. Use a very sensitive light detector
Last Answer : Use a single-mode fiber
Description : Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector
Last Answer : A. using a monochromatic light source
Description : Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion
Last Answer : D. wavelength dispersion
Description : Which type of fiber-optic cable has the least modal dispersion? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index
Last Answer : A. single-mode step-index
Description : The effect of a large magnitude of the numerical aperture ∙ A. The amount of external light the fiber will accept is greater. ∙ B. The amount of external light the fiber will accept is less. ... The amount of modal dispersion will be less. ∙ D. The amount of chromatic dispersion will be greater.
Last Answer : The amount of external light the fiber will accept is greater.
Description : The bandwidth of a fiber is limited by ∙ a. Mode ∙ b. Wavelength ∙ c. Dispersion ∙ d. Frequency
Last Answer : c. Dispersion
Description : Modal dispersion is caused by the ∙ a. Dependence of wavelength on index of refraction ∙ b. Dependence of propagation constant on index of refraction ∙ c. Dependence of the propagation constant on the wavelength ∙ d. Dependence of the propagation constant on the mode number
Last Answer : d. Dependence of the propagation constant on the mode number
Description : Material dispersion is caused by the ∙ a. Wavelength dependence of the index of refraction ∙ b. Wavelength independence of the index of refraction ∙ c. Dependence of the propagation constant on the mode number ∙ d. Independence of the propagation constant on the mode number
Last Answer : d. Independence of the propagation constant on the mode number
Description : The ratio of the speed of light in a vacuum and the speed of light in the material used. ∙ a. S/N ratio ∙ b. Refractive index ∙ c. Intermodal dispersion ∙ d. Monomode ratio
Last Answer : b. Refractive index
Description : One of the following is not a characteristic of light detectors. ∙ a. Responsitivity ∙ b. Spectral response ∙ c. Transmit time ∙ d. Dispersion
Last Answer : ∙ d. Dispersion
Description : Which type of fiber-optic cable has the least modal dispersion? ∙ a. Single mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index
Last Answer : ∙ a. Single mode step-index
Description : The upper pulse rate and information carrying capacity of a cable is limited by ∙ a. Pulse shortening ∙ b. Attenuation ∙ c. Light leakage ∙ d. Modal dispersion
Last Answer : ∙ d. Modal dispersion
Description : The operation of the fiber-optic cable is based on the principle of ∙ a. Refraction ∙ b. Reflection ∙ c. Dispersion ∙ d. Absorption
Last Answer : ∙ b. Reflection
Description : What type of fiber has the highest modal dispersion? ∙ a. Step-index multimode ∙ b. Graded index multimode ∙ c. Step-index single mode ∙ d. Graded index mode
Last Answer : a. Step-index multimode
Description : ______ dispersion is caused by the difference in the propagation times of light rays that take different paths down a fiber. ∙ a. Material dispersion ∙ b. Wavelength dispersion ∙ c. Modal dispersion
Last Answer : ∙ c. Modal dispersion
Description : Dispersion is used to describe the ∙ a. Splitting of white light into its component colors ∙ b. Propagation of light in straight lines ∙ c. Bending of a beam of light when it goes from one medium to another ∙ d. Bending of a beam light when it strikes a mirror
Last Answer : a. Splitting of white light into its component colors
Description : Is the width of the range of wavelengths emitted by the light source ∙ a. Bandwidth ∙ b. Chromatic Dispersion ∙ c. Spectral width ∙ d. Beamwidth
Last Answer : c. Spectral width
Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion
Last Answer : a. Mode
Description : A single-mode cable does not suffer from: a. modal dispersion b. chromatic dispersion c. waveguide dispersion d. all of the above
Last Answer : a. modal dispersion
Description : Which of the following is not a major benefit of a fiber-optic cable? ∙ A. immunity from interference ∙ B. no electrical safety problems ∙ C. excellent data security ∙ D. lower cost
Last Answer : ∙ D. lower cost
Description : What is used to block light from a laser and let other light through ∙ a. Neutral density ∙ b. Color ∙ c. Interference ∙ d. Spatial
Last Answer : ∙ c. Interference
Description : The main benefit of light-wave communications over microwaves or any other communications media is ∙ a. Lower cost ∙ b. Better security ∙ c. Wider bandwidth ∙ d. Freedom from interference
Last Answer : c. Wider bandwidth
Description : Which of the following is not a major benefit of fiber-optic cable? ∙ a. Immunity from interference ∙ b. No electrical safety problems ∙ c. Excellent data security ∙ d. Lower cost
Last Answer : b. No electrical safety problems
Description : The wavelength of light has no role in ∙ a. Diffraction ∙ b. Interference ∙ c. Polarization ∙ d. Reflection
Last Answer : c. Polarization
Description : The loss in signal power as light travels down a fiber is called a. Dispersion b. Scattering c. Absorption d. Attenuation
Last Answer : d. Attenuation
Description : A rainbow is formed by the ________ of light by water droplets. (a) dispersion (b) scattering (c) total internal reflection (d) dispersion and total interval reflection
Last Answer : Ans:(d)
Description : The sun remains visible for some time after it actually sets below the horizon. This happens due to 1. atmospheric refraction 2. scattering of light 3. dispersion Which of the above statements is/are correct? (a) 1 only (b) 1 and 2 (c) 1 and 3 (d) 1, 2 and 3
Last Answer : Ans:(a)
Description : Rainbow is formed due to – (1) refraction and dispersion (2) scattering and refraction (3) diffraction and refraction (4) refraction and reflection
Last Answer : (4) refraction and reflection Explanation: A rainbow is an optical phenomenon that is caused by both reflection and refraction of light in water droplets resulting in a spectrum of light appearing in ... water, then reflected inside on the back of the droplet and refracted again when leaving it.
Description : The redness in atmosphere at Sunrise and Sunset is due to – (1) Refraction of light (2) Reflection of light (3) Dispersion of light (4) Scattering of light
Last Answer : (4) Scattering of light Explanation: The red colour in the sky at sunset (and sunrise) is due to an effect called Rayleigh scattering. At sunrise or sunset, since the Sun is low on the horizon, ... through more of the atmosphere - and therefore bounce off more molecules -than at other times of day.
Description : The colour of sky appears blue due to – (1) reflection (2) refraction (3) scattering of shorter wave lengths (4) dispersion
Last Answer : (3) scattering of shorter wave lengths Explanation: The sunlit sky is blue because air scatters short-wavelength light more than longer wavelengths. Since blue light is at the short wavelength end of the ... that the human eye perceives blue when looking toward parts of the sky other than the sun.
Description : Twinkling of stars and non-twinkling of planets is accounted for by (a) scattering of light (b) dispersion of light (c) atmospheric refraction (d) none of these
Last Answer : (c) atmospheric refraction
Description : The sun appears oval shaped or flattened due to (a) dispersion (b) scattering (c) atmospheric refraction (d) cannot say
Description : Which of the following phenomena of light are involved in the formation of a rainbow? (a) Reflection, refraction and dispersion (b) Refraction, dispersion and total internal reflection (c) Refraction, dispersion and internal reflection (d) Dispersion, scattering and total internal reflection
Last Answer : (b) Refraction, dispersion and total internal reflection
Description : The redness in atmosphere at Sunrise and Sunset is due to : (1) Refraction of light (2) Reflection of light (3) Dispersion of light (4) Scattering of light
Last Answer : Scattering of light
Description : Rainbow is formed due to (1) refraction and dispersion (2) scattering and refraction (3) diffraction and refraction (4) refraction and reflection
Last Answer : refraction and reflection
Description : The colour of sky appears blue due to (1) reflection (2) refraction (3) scattering of shorter wave lengths (4) dispersion
Last Answer : scattering of shorter wave lengths