How many bits are required to represent one nibble ?

How many bits are required to represent one nibble ?
by

1 Answer

Answer :

4-bits are required to represent one nibble.
by

Related questions

1 nibble equals to A) 1 bits B) 2 bits C) 4 bits D) 8 bits

Description : 1 nibble equals to A) 1 bits B) 2 bits C) 4 bits D) 8 bits

Last Answer : Answer : C

One nibble is equivalent to how many bits? a) 2 b) 4 c) 8 d) 1

Description : One nibble is equivalent to how many bits? a) 2 b) 4 c) 8 d) 1

Last Answer : Answer: b Explanation: A nibble is defined as a unit of data which comprises of 4 binary digits or half of 8-bit byte. Therefore, 1 nibble = 4 bits. A bit is the smallest unit of data in a computer system. A byte = 8 bits, therefore, half of a byte=4 bits=a nibble

A nibble is equal to _______ A. 4 bits B. 8 bits C. 16 bits D. 32 bits

Description : A nibble is equal to _______ A. 4 bits B. 8 bits C. 16 bits D. 32 bits

Last Answer : A. 4 bits

A binary number with 8 bits is called asa___ a. Bytes b. Bits c. Nibble d. __ Allof these

Description : A binary number with 8 bits is called asa___ a. Bytes b. Bits c. Nibble d. __ Allof these

Last Answer : a. Bytes

A group of 4 binary bits is called. a. Nibble b. Byte c. Decimal d. Digit

Description : A group of 4 binary bits is called. a. Nibble b. Byte c. Decimal d. Digit

Last Answer : a. Nibble

The message in pub/sub is an opaque blob of ________ a) Bits b) Bytes c) Word d) Nibble

Description : The message in pub/sub is an opaque blob of ________ a) Bits b) Bytes c) Word d) Nibble

Last Answer : Bytes

Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)

Description : Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)

Last Answer : a. BYTE

A nibble is equal to_____ bits. (1) 32 (2) 4 (3) 8 (4) 16

Description : A nibble is equal to_____ bits. (1) 32 (2) 4 (3) 8 (4) 16

Last Answer : 4

How many address bits are required to represent 4K memory (A) 5 bits. (B) 12 bits. (C) 8 bits. (D) 10 bits.

Description : How many address bits are required to represent 4K memory (A) 5 bits. (B) 12 bits. (C) 8 bits. (D) 10 bits.

Last Answer : (B) 12 bits.

How many address bits are required to represent a 32 K memory (A) 10 bits. (B) 12 bits. (C) 14 bits. (D) 16 bits.

Description : How many address bits are required to represent a 32 K memory (A) 10 bits. (B) 12 bits. (C) 14 bits. (D) 16 bits.

Last Answer : (D) 16 bits.

Minimum number of bits required to represent maximum value of given analogue signal with 0.1% accuracy is:

Description :  Minimum number of bits required to represent maximum value of given analogue signal with 0.1% accuracy is: a. 8 bits b. 9 bits c. 10 bits d. 12 bits

Last Answer : 10

Four bits are used for packet sequence numbering in a sliding window protocol used in computer network...

Description : Four bits are used for packet sequence numbering in a sliding window protocol used in computer network. What is maximum window size?  A) 4 B) 8 C) 15 D) 16

Last Answer : Four bits are used for packet sequence numbering in a sliding window protocol used in computer network. What is maximum window size?  15

How many bits Internet address is assigned to each host on a TCP/IP Internet which is used in all ...

Description : How many bits Internet address is assigned to each host on a TCP/IP Internet which is used in all communications with host?  A) 16 bits B) 32 bits C) 48 bits D) 64 bits

Last Answer : How many bits Internet address is assigned to each host on a TCP/IP Internet which is used in all communications with host?  32 bits

How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is ...

Description : How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)?  A) 300 B) 240 C) 250 D) 275

Last Answer : How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)?  300

When we move from the outermost track to the innermost track in a magnetic disk, then density (bits per linear inch)

Description : When we move from the outermost track to the innermost track in a magnetic disk, then density (bits per linear inch)  (1) decreases (2) increases (3) remains the same (4) either remains constant or decreases

Last Answer : increases

How many bits are needed to represent each color?

Description : How many bits are needed to represent each color?

Last Answer : Most modern digital cameras use 24 bits (8 bits per primary) torepresent a color. But more or less can be used, depending on thequality desired.Many early computer graphics cards used only 4 bits to representa color.

In instruction formats instruction is represent by a___ _ of bits: a. Sequence b. Parallel c. Both d. None

Description : In instruction formats instruction is represent by a___ _ of bits: a. Sequence b. Parallel c. Both d. None

Last Answer : a. Sequence

Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Description : Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Last Answer : 120

How many bits are used to represent Unicode, ASCII, UTF-16, and UTF-8 characters?

Description : How many bits are used to represent Unicode, ASCII, UTF-16, and UTF-8 characters?

Last Answer : Ans. Unicode requires 16 bits and ASCII require 7 bits. Although the ASCII character set uses only 7 bits, it is usually represented as 8 bits. UTF-8 represents characters using 8, 16, and 18 bit patterns. UTF-16 uses 16-bit and larger bit patterns.

The IEEE-754 double-precision format to represent floating point numbers, has a length of ........... bits. (A) 16 (B) 32 (C) 48 (D) 64

Description : The IEEE-754 double-precision format to represent floating point numbers, has a length of ........... bits. (A) 16 (B) 32 (C) 48 (D) 64

Last Answer : (D) 64

Why does my puppy nibble my fingers?

Description : Why does my puppy nibble my fingers?

Last Answer : Withdraw your hand and walk away.

What is the most significant nibble of the ASCII code for the letter X?

Description : What is the most significant nibble of the ASCII code for the letter X?

Last Answer : Feel Free to Answer

The smallest unit of data in computer is ________________ a) Byte b) Nibble c) Bit d) KB

Description : The smallest unit of data in computer is ________________ a) Byte b) Nibble c) Bit d) KB

Last Answer : Answer: c Explanation: A bit is defined as the smallest unit of data in a computer system. It is used as a short form of Binary Digit. A bit can have only two values 0 or 1. A nibble comprises of 4 bits, a byte is a collection of 8 bits whereas KB (Kilobyte) is equal to 1024 bytes

A nibble is equal to – (1) 32 (2) 4 (3) 8 (4) 16

Description : A nibble is equal to – (1) 32 (2) 4 (3) 8 (4) 16

Last Answer : (2) 4 Explanation: In computing, a nibble is a fourbit aggregation, or half an octet. A nibble contains 4 bits.

Abinary number with 4 bitsiscalleda_ a. Bit b. Bytes ce. Nibble d. None of these

Description : Abinary number with 4 bitsiscalleda_ a. Bit b. Bytes ce. Nibble d. None of these

Last Answer : ce. Nibble

Select the most appropriate option for the following: Devour: guzzle:: nibble : ---------- a) Chew b) Savour c) Peck d) Gulp

Description : Select the most appropriate option for the following: Devour: guzzle:: nibble : ---------- a) Chew b) Savour c) Peck d) Gulp

Last Answer : c) Peck

Select the most appropriate option for the following: Devour: guzzle:: nibble : ---------- a) Chew b) Savour c) Peck d) Gulp

Description : Select the most appropriate option for the following: Devour: guzzle:: nibble : ---------- a) Chew b) Savour c) Peck d) Gulp

Last Answer : c) Peck

A nibble can be represented in the from of: a. Octal digit b. Decimal c. Hexadecimal d. None of these

Description : A nibble can be represented in the from of: a. Octal digit b. Decimal c. Hexadecimal d. None of these

Last Answer : c. Hexadecimal

Sequence of code assigned is called a. A. code word b. B. word c. C. byte d. D. nibble

Description : Sequence of code assigned is called a. A. code word b. B. word c. C. byte d. D. nibble

Last Answer : a. A. code word

Define following : i. Radix ii. Bit iii. Nibble iv. Byte

Description : Define following : i. Radix ii. Bit iii. Nibble iv. Byte

Last Answer : i. Radix- the base to a given number system is called as radix.  ii. Bit- Single ‗1‘ or ‗0‘ is called as a bit.  iii. Nibble- a group of 4 bits is called as nibble  iv. Byte- a group of 8 bits is called as a byte.

What is the minimum number of bits required in a PCM code for a range of 10,000? A. 12 B. 9 C. 14 D. 10

Description : What is the minimum number of bits required in a PCM code for a range of 10,000? A. 12 B. 9 C. 14 D. 10

Last Answer : C. 14

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Description : If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Last Answer : 28. 50.

To permit the selection of 1 out of 16 equiprobable events, the number of bits required is

Description : To permit the selection of 1 out of 16 equiprobable events, the number of bits required is

Last Answer : 4

Words having 8-bits are to be stored into computer memory. The number of lines required for writing into memory are (A) 1. (B) 2. (C) 4. (D) 8.

Description : Words having 8-bits are to be stored into computer memory. The number of lines required for writing into memory are (A) 1. (B) 2. (C) 4. (D) 8.

Last Answer : Ans: D Because 8-bit words required 8 bit data lines.

Minimum number of bits required to store any 3 digit decima ln umber is equal to (A) 3 (B) 5 (C) 8 (D) 10

Description : Minimum number of bits required to store any 3 digit decima ln umber is equal to (A) 3 (B) 5 (C) 8 (D) 10 

Last Answer : Answer: D

IPv4 and IPv6 are addresses used to identify computers on the internet. Find the correct statement out of the following: (A) Number of bits required for IPv4 address is more than number of bits required for IPv6 address. (B) Number of bits required for IPv4 address is same as number of bits required for IPv6 address. (C) Number of bits required for IPv4 address is less than number of bits required for IPv6 address. (D) Number of bits required for IPv4 address is 64.

Description : IPv4 and IPv6 are addresses used to identify computers on the internet. Find the correct statement out of the following: (A) Number of bits required for IPv4 address is more than number of bits required for ... of bits required for IPv6 address. (D) Number of bits required for IPv4 address is 64. 

Last Answer : (C) Number of bits required for IPv4 address is less than number of bits required for IPv6 address.

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ................ (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Description : Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ... ...... (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Last Answer : Answer: Marks given to all

A memory management system has 64 pages with 512 bytes page size. Physical memory consists of 32 page frames. Number of bits required in logical and physical address are respectively: (1) 14 and 15 (2) 14 and 29 (3) 15 and 14 (4) 16 and 32

Description : A memory management system has 64 pages with 512 bytes page size. Physical memory consists of 32 page frames. Number of bits required in logical and physical address are respectively: (1) 14 and 15 (2) 14 and 29 (3) 15 and 14 (4) 16 and 32

Last Answer : (3) 15 and 14

How many bits are required to encode 32 level PCM:

Description : How many bits are required to encode 32 level PCM:  (1) 6 (2) 5 (3) 4 (4) 3

Last Answer : 5 bits are required to encode 32 level PCM.

Heap allocation is required for languages

Description : Heap allocation is required for languages  A) That support recursion B) That support dynamic data structures C) That use dynamic scope rules D) None of the above

Last Answer : Heap allocation is required for languages That support dynamic data structures

A report allows you to represent data retrieved from one or more tables so that, it can be analysed and printed if required. -Technology

Description : A report allows you to represent data retrieved from one or more tables so that, it can be analysed and printed if required. -Technology

Last Answer : True When you want to print those records which are fetched from your database then, reports are more useful for this purpose.

Consider the following ER diagram: Image The minimum number of tables required to represent M, N, P, R1, R2 is (A) 2 (B) 3 (C) 4 (D) 5

Description : Consider the following ER diagram:  The minimum number of tables required to represent M, N, P, R1, R2 is (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : (A) 2 

Let E1 and E2 be two entities in E-R diagram with simple single valued attributes. R1 and R2 are two relationships between E1 and E2 where R1 is one-many and R2 is many-many. R1 and R2 do not have any attributes of their own. How many minimum number of tables are required to represent this situation in the Relational Model? (A) 4 (B) 3 (C) 2 (D) 1

Description : Let E1 and E2 be two entities in E-R diagram with simple single valued attributes. R1 and R2 are two relationships between E1 and E2 where R1 is one-many and R2 is many-many. R1 and R2 do not have any ... are required to represent this situation in the Relational Model? (A) 4 (B) 3 (C) 2 (D) 1

Last Answer : (B) 3 

Let M and N be two entities in an E-R diagram with simple single vale attributes. R1 and R2 are two relationship between M and N, whereas R1 is one-to-many and R2 is many-to-many. The minimum number of tables required to represent M, N, R1 and R2 in the relational model are .......... (1) 4 (2) 6 (3) 7 (4) 3

Description : Let M and N be two entities in an E-R diagram with simple single vale attributes. R1 and R2 are two relationship between M and N, whereas R1 is one-to-many and R2 is many-to-many. The minimum number of tables required to ... and R2 in the relational model are .......... (1) 4 (2) 6 (3) 7 (4) 3

Last Answer : Answer: 4