An incident ray can be defined as ∙ A. a light ray reflected from a flat surface ∙ B. a light directed toward a surface ∙ C. a diffused light ray ∙ D. a light ray that happens periodically

An incident ray can be defined as
∙ A. a light ray reflected from a flat surface
∙ B. a light directed toward a surface
∙ C. a diffused light ray
∙ D. a light ray that happens periodically
by

1 Answer

Answer :

∙ B. a light directed toward a surface
by

Related questions

Anincidentraycan be defined as a. a light ray reflected from a flat surface b. alight raydirectedtowardasurface c. a diffused light ray d. a light ray that happens periodically

Description : Anincidentraycan be defined as a. a light ray reflected from a flat surface b. alight raydirectedtowardasurface c. a diffused light ray d. a light ray that happens periodically

Last Answer : b. alight raydirectedtowardasurface

If a mirror is used to reflect light, the reflected light angle is ____ as the incident angle ∙ a. Smaller ∙ b. Larger ∙ c. The same ∙ d. Independent

Description : If a mirror is used to reflect light, the reflected light angle is ____ as the incident angle ∙ a. Smaller ∙ b. Larger ∙ c. The same ∙ d. Independent

Last Answer : c. The same

Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ A. less than ∙ B. greater than ∙ C. equal to ∙ D. zero

Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ A. less than ∙ B. greater than ∙ C. equal to ∙ D. zero

Last Answer : ∙ B. greater than

The minimum angle of incidence at which the light ray may strike the interface of two media and result in an angle of refraction of 90 degrees or greater. ∙ A. optimum angle ∙ B. angle of refraction ∙ C. refracted angle ∙ D. critical angle

Description : The minimum angle of incidence at which the light ray may strike the interface of two media and result in an angle of refraction of 90 degrees or greater. ∙ A. optimum angle ∙ B. angle of refraction ∙ C. refracted angle ∙ D. critical angle

Last Answer : D. critical angle

Ratio of the velocity of propagation of a light ray in free space to the velocity of propagation of a light ray in free space in a given material. ∙ A. refractive index ∙ B. standing wave ratio ∙ C. velocity factor ∙ D. propagation velocity

Description : Ratio of the velocity of propagation of a light ray in free space to the velocity of propagation of a light ray in free space in a given material. ∙ A. refractive index ∙ B. standing wave ratio ∙ C. velocity factor ∙ D. propagation velocity

Last Answer : ∙ A. refractive index

Most fiber optic light sources emit light in which spectrum? ∙ A. visible ∙ B. infrared ∙ C. ultraviolet ∙ D. X-ray

Description : Most fiber optic light sources emit light in which spectrum? ∙ A. visible ∙ B. infrared ∙ C. ultraviolet ∙ D. X-ray

Last Answer : B. infrared

The band of light frequencies to which human eye will respond ∙ A. Infrared ∙ B. Visible light ∙ C. Ultraviolet ∙ D. Cosmic ray

Description : The band of light frequencies to which human eye will respond ∙ A. Infrared ∙ B. Visible light ∙ C. Ultraviolet ∙ D. Cosmic ray

Last Answer : B. Visible light

Most fiber-optic light sources emit light in which spectrum? ∙ a. Visible ∙ b. Infrared ∙ c. Ultraviolet ∙ d. X-ray

Description : Most fiber-optic light sources emit light in which spectrum? ∙ a. Visible ∙ b. Infrared ∙ c. Ultraviolet ∙ d. X-ray

Last Answer : ∙ b. Infrared

Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ a. Less than ∙ b. Grater than ∙ c. Equal to ∙ d. Zer

Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ a. Less than ∙ b. Grater than ∙ c. Equal to ∙ d. Zer

Last Answer : ∙ b. Grater than

When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Description : When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Last Answer : ∙ b. Antireflection coating

When light strikes a flat polished end of a fiber, it produces a loss of ∙ a. 14 % ∙ b. 4 % ∙ c. 10 % ∙ d. 1 %

Description : When light strikes a flat polished end of a fiber, it produces a loss of ∙ a. 14 % ∙ b. 4 % ∙ c. 10 % ∙ d. 1 %

Last Answer : ∙ b. 4 %

The _____ of a detector is the fraction of incident photons that produce a photoelectron or electron-hole pair ∙ a. Responsitivity ∙ b. Photon efficiency ∙ c. Aperture ∙ d. Quantum efficiency

Description : The _____ of a detector is the fraction of incident photons that produce a photoelectron or electron-hole pair ∙ a. Responsitivity ∙ b. Photon efficiency ∙ c. Aperture ∙ d. Quantum efficiency

Last Answer : d. Quantum efficiency

When a light ray travelling in glass is incident on an air surface, A. it will refract away from the normal B. some of the light may be reflected C. all of the light may be reflected D. two of A, B, and C E. all of A, B, and C

Description : When a light ray travelling in glass is incident on an air surface, A. it will refract away from the normal B. some of the light may be reflected C. all of the light may be reflected D. two of A, B, and C E. all of A, B, and C

Last Answer : E. all of A, B, and C

Assume a ray of light is incident on a smooth reflecting surface at an angle of incidence of 15 degrees to the normal. What is the angle between the incident ray and the reflected ray?

Description : Assume a ray of light is incident on a smooth reflecting surface at an angle of incidence of 15 degrees to the normal. What is the angle between the incident ray and the reflected ray?

Last Answer : ANSWER: 30 DEGREES

It is the angle formed between the propagating ray and the normal after the ray has entered the second medium. ∙ A. angle of incidence ∙ B. angle of reflection ∙ C. propagation angle ∙ D. angle of refraction

Description : It is the angle formed between the propagating ray and the normal after the ray has entered the second medium. ∙ A. angle of incidence ∙ B. angle of reflection ∙ C. propagation angle ∙ D. angle of refraction

Last Answer : angle of reflection

The law that states “When visible light of high frequency electromagnetic radiation illuminates a metallic surface, electrons are emitted” is known as ____________. ∙ A. Einstein law of photon ∙ B. Marconi’s law ∙ C. Maxwell’s law ∙ D. Plank’s law

Description : The law that states “When visible light of high frequency electromagnetic radiation illuminates a metallic surface, electrons are emitted” is known as ____________. ∙ A. Einstein law of photon ∙ B. Marconi’s law ∙ C. Maxwell’s law ∙ D. Plank’s law

Last Answer : D. Plank’s law

Which of the following terms best describes the reason that light is refracted at different angles? ∙ A. Photon energy changes with wavelength ∙ B. Light is refracted as a function of surface smoothness ∙ C. The angle is determined partly by a and b ∙ D. The angle is determined by the index of the materials

Description : Which of the following terms best describes the reason that light is refracted at different angles? ∙ A. Photon energy changes with wavelength ∙ B. Light is refracted as a function of surface smoothness ∙ ... determined partly by a and b ∙ D. The angle is determined by the index of the materials

Last Answer : ∙ D. The angle is determined by the index of the materials

The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering

Description : The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering

Last Answer : A. separating light into its component frequencies

A beam of light is incident on a perfectly smooth body of water. The angle that the REFLECTED ray makes with the normal is: w) greater than x) smaller than y) the same as the angle the incident ray makes with the normal.

Description : A beam of light is incident on a perfectly smooth body of water. The angle that the REFLECTED ray makes with the normal is: w) greater than x) smaller than y) the same as the angle the incident ray makes with the normal.

Last Answer : ANSWER: Y -- THE SAME AS

Diffraction due to circular aperture If a light passes through a small pinhole, and incident on a screen. What will be observed on the screen? A.A sharp bright point of the width equal to width the pinhole B. A bright point of the width equal to width the pinhole but of less intensity C. A bright ring at the centre surrounded by alternate dark and bright rings D. A diffused bright point

Description : Diffraction due to circular aperture If a light passes through a small pinhole, and incident on a screen. What will be observed on the screen? A.A sharp bright point of the width equal to ... A bright ring at the centre surrounded by alternate dark and bright rings D. A diffused bright point

Last Answer : C. A bright ring at the centre surrounded by alternate dark and bright rings

A coupler which consists of a series of lenses and a partly reflective surface ∙ a. Beam-splitting coupler ∙ b. Reflective star coupler ∙ c. Fused coupler ∙ d. None of these

Description : A coupler which consists of a series of lenses and a partly reflective surface ∙ a. Beam-splitting coupler ∙ b. Reflective star coupler ∙ c. Fused coupler ∙ d. None of these

Last Answer : ∙ a. Beam-splitting coupler

Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Description : Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Last Answer : c. An attenuation increase caused by bends radiating from the side of the fiber

Refraction is the ∙ A. bending of light ∙ B. reflection of light waves ∙ C. distortion of light waves ∙ D. diffusion of light waves

Description : Refraction is the ∙ A. bending of light ∙ B. reflection of light waves ∙ C. distortion of light waves ∙ D. diffusion of light waves

Last Answer : A. bending of light

The main benefit of light wave communications over microwaves or any other communications media are ∙ A. lower cost ∙ B. better security ∙ C. wider bandwidth ∙ D. freedom from interface

Description : The main benefit of light wave communications over microwaves or any other communications media are ∙ A. lower cost ∙ B. better security ∙ C. wider bandwidth ∙ D. freedom from interface

Last Answer : C. wider bandwidth

EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the cone of acceptance should be filled with light. ∙ C. 70 percent of input light should be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.

Description : EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the ... be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.

Last Answer : 70 percent of the core diameter and 70% of the fiber NA should be filled with light.

The speed of light in plastic compared to the speed of light in air is ∙ A. less ∙ B. more ∙ C. the same ∙ D. zero

Description : The speed of light in plastic compared to the speed of light in air is ∙ A. less ∙ B. more ∙ C. the same ∙ D. zero

Last Answer : A. less

The upper pulse rate and information-carrying capacity of a cable is limited by ∙ A. pulse shortening ∙ B. attenuation ∙ C. light leakage ∙ D. modal dispersion

Description : The upper pulse rate and information-carrying capacity of a cable is limited by ∙ A. pulse shortening ∙ B. attenuation ∙ C. light leakage ∙ D. modal dispersion

Last Answer : D. modal dispersion

A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer

Description : A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer

Last Answer : B. 1.3 micrometer

The minimum optical power a light detector can receive and still produce a usable electrical output signal. ∙ A. light responsivity ∙ B. light sensitivity ∙ C. light collectivity ∙ D. illumination

Description : The minimum optical power a light detector can receive and still produce a usable electrical output signal. ∙ A. light responsivity ∙ B. light sensitivity ∙ C. light collectivity ∙ D. illumination

Last Answer : B. light sensitivity

The term responsivity as it applies to a light detector is best described as ∙ A. the time required for the signal to go from 10 to 90 percent of maximum amplitude ∙ B. the ratio of the diode output current to the input optical power ∙ C. the ratio of the input power to output power ∙ D. the ratio of output current to input current

Description : The term responsivity as it applies to a light detector is best described as ∙ A. the time required for the signal to go from 10 to 90 percent of maximum amplitude ∙ B. the ratio of the diode ... . the ratio of the input power to output power ∙ D. the ratio of output current to input current

Last Answer : the ratio of the diode output current to the input optical power

The time it takes a light induced carrier travel across the depletion region of the semiconductor. ∙ A. dispersion ∙ B. response time ∙ C. irradiance ∙ D. transit time

Description : The time it takes a light induced carrier travel across the depletion region of the semiconductor. ∙ A. dispersion ∙ B. response time ∙ C. irradiance ∙ D. transit time

Last Answer : D. transit time

The leakage current that flows through a photodiode with no light input ∙ A. dark voltage ∙ B. dark impedance ∙ C. dark power ∙ D. dark current

Description : The leakage current that flows through a photodiode with no light input ∙ A. dark voltage ∙ B. dark impedance ∙ C. dark power ∙ D. dark current

Last Answer : D. dark current

A pn-junction diode emits light by spontaneous emission ∙ A. LED ∙ B. APD ∙ C. PIN

Description : A pn-junction diode emits light by spontaneous emission ∙ A. LED ∙ B. APD ∙ C. PIN

Last Answer : A. LED

How can modal dispersion reduced entirely? ∙ A. Use a graded index fiber ∙ B. Use a single-mode fiber ∙ C. Use a monochromatic light source ∙ D. Use a very sensitive light detector

Description : How can modal dispersion reduced entirely? ∙ A. Use a graded index fiber ∙ B. Use a single-mode fiber ∙ C. Use a monochromatic light source ∙ D. Use a very sensitive light detector

Last Answer : Use a single-mode fiber

It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion

Description : It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion

Last Answer : A. modal dispersion

As light is coupled in a multiport deflective device, the power is reduced by ∙ A. 1.5 dB ∙ B. 0.1 dB ∙ C. 0.5 dB ∙ D. 0.001 dB

Description : As light is coupled in a multiport deflective device, the power is reduced by ∙ A. 1.5 dB ∙ B. 0.1 dB ∙ C. 0.5 dB ∙ D. 0.001 dB

Last Answer : C. 0.5 dB

Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector

Description : Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector

Last Answer : A. using a monochromatic light source

Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion

Description : Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion

Last Answer : D. wavelength dispersion

For a single mode optical cable with 0.25 dB/km loss, determine the optical power 100 km from a 0.1-mW light source. ∙ A. -45 dBm ∙ B. -15 dBm ∙ C. -35 dBm

Description : For a single mode optical cable with 0.25 dB/km loss, determine the optical power 100 km from a 0.1-mW light source. ∙ A. -45 dBm ∙ B. -15 dBm ∙ C. -35 dBm

Last Answer : ∙ C. -35 dBm

It is caused by hydroxide ions in the material ∙ A. visible light absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. ion resonance absorption

Description : It is caused by hydroxide ions in the material ∙ A. visible light absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. ion resonance absorption

Last Answer : D. ion resonance absorption

t is a result of photons of light that are absorbed by the atoms of the glass core molecule. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Description : t is a result of photons of light that are absorbed by the atoms of the glass core molecule. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Last Answer : B. infrared absorption

It is caused by valence electrons in the silica material from which the fiber are manufactured. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Description : It is caused by valence electrons in the silica material from which the fiber are manufactured. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Last Answer : ultraviolet absorption

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Last Answer : B. absorption loss

Which of the following is not a factor in cable light loss? ∙ A. reflection ∙ B. absorption ∙ C. scattering ∙ D. dispersion

Description : Which of the following is not a factor in cable light loss? ∙ A. reflection ∙ B. absorption ∙ C. scattering ∙ D. dispersion

Last Answer : A. reflection

Results in reduction in the power of light wave as it travels down the cable. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Description : Results in reduction in the power of light wave as it travels down the cable. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Last Answer : A. power loss

Infrared light has a wavelength that is ∙ A. less than 400 nm ∙ B. more than 700 nm ∙ C. less than 700 nm ∙ D. a little over 400 nm

Description : Infrared light has a wavelength that is ∙ A. less than 400 nm ∙ B. more than 700 nm ∙ C. less than 700 nm ∙ D. a little over 400 nm

Last Answer : B. more than 700 nm

More than one path for light rays to take down the fiber ∙ A. Multimode ∙ B. Step-index ∙ C. Single mode

Description : More than one path for light rays to take down the fiber ∙ A. Multimode ∙ B. Step-index ∙ C. Single mode

Last Answer : A. Multimode

Only one path for light rays to take down the fiber ∙ A. Multimode ∙ B. Step-index ∙ C. Single mode ∙ D. Graded index

Description : Only one path for light rays to take down the fiber ∙ A. Multimode ∙ B. Step-index ∙ C. Single mode ∙ D. Graded index

Last Answer : C. Single mode

The effect of a large magnitude of the numerical aperture ∙ A. The amount of external light the fiber will accept is greater. ∙ B. The amount of external light the fiber will accept is less. ∙ C. The amount of modal dispersion will be less. ∙ D. The amount of chromatic dispersion will be greater.

Description : The effect of a large magnitude of the numerical aperture ∙ A. The amount of external light the fiber will accept is greater. ∙ B. The amount of external light the fiber will accept is less. ... The amount of modal dispersion will be less. ∙ D. The amount of chromatic dispersion will be greater.

Last Answer : The amount of external light the fiber will accept is greater.