If MN/MX is low the 8086 operates in ______ mode.

If MN/MX is low the 8086 operates in  ______ mode. 

 (a) Minimum (b) Maximum (c) Minimum & Maximum (d) Medium 
by

1 Answer

Answer :

If MN/MX is low the 8086 operates in  Maximum mode. 

by

Related questions

In 8086 microprocessor one of the following statements is not true.a)Coprocessor is interfaced in MAX mode b)Coprocessor is interfaced in MIN mode c)I/O can be interfaced in MAX / MIN moded)Supports pipelining

Description : In 8086 microprocessor one of the following statements is not true.a)Coprocessor is interfaced in MAX mode b)Coprocessor is interfaced in MIN mode c)I/O can be interfaced in MAX / MIN moded)Supports pipelining

Last Answer : b)Coprocessor is interfaced in MIN mode

8088 microprocessor differs with 8086 microprocessor in a) Data width on the output b) Address capability c) Support of coprocessor d) Support of MAX / MIN mode

Description : 8088 microprocessor differs with 8086 microprocessor in a) Data width on the output b) Address capability c) Support of coprocessor d) Support of MAX / MIN mode

Last Answer : a) Data width on the output

In 8086 microprocessor one of the following statements is not true. a) Coprocessor is interfaced in MAX mode b) Coprocessor is interfaced in MIN mode c) I/O can be interfaced in MAX / MIN mode

Description : In 8086 microprocessor one of the following statements is not true. a) Coprocessor is interfaced in MAX mode b) Coprocessor is interfaced in MIN mode c) I/O can be interfaced in MAX / MIN mode

Last Answer : b) Coprocessor is interfaced in MIN mode

A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input

Description : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is :

Last Answer : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is : 200 V

When a line commutated converter operates in the inverter mode

Last Answer : When a line commutated converter operates in the inverter mode It delivers real power to the A.C. supply.

A series mode crystal is marked 10.000 MHz., It is used in a circuit that operates the crystal in its parallel mode. The circuit can be expected to A) Run below 10 MHz B) Run at 10 MHz C) Run above 10 MHz D) Not oscillate.

Description : A series mode crystal is marked 10.000 MHz., It is used in a circuit that operates the crystal in its parallel mode. The circuit can be expected to A) Run below 10 MHz B) Run at 10 MHz C) Run above 10 MHz D) Not oscillate.

Last Answer : C) Run above 10 MHz

Fill in the blank(s) with the appropriate word(s) i. A MOSFET operates in the ________________ mode when vGS < vGS(th)

Description : Fill in the blank(s) with the appropriate word(s)  i. A MOSFET operates in the ________________ mode when vGS < vGS(th)  ii. In the ohmic region of operation of a MOSFET vGS - vGS (th) ... ix. The safe operating area of a MOSFET is restricted on the left hand side by the ________________ limit. 

Last Answer : i. A MOSFET operates in the Cut off mode when vGS < vGS(th) ii. In the ohmic region of operation of a MOSFET vGS - vGS (th) is greater than vDS. iii. rDS (ON) of a MOSFET decreases ... Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA. Version 2 EE IIT, Kharagpur

Describe the functions of General purpose registers of 8086 microprocessor.

Description : Describe the functions of General purpose registers of 8086 microprocessor.

Last Answer : (i) General Purpose Registers of 8086 1. AX (Accumulator) - Used to store the result for arithmetic / logical operations All I/O data transfer using IN & OUT instructions use A ... Index - acts as the destination for string movement instructions Used to hold offset address of Extra segment.

Which microprocessor accepts the program written for 8086 without any changes?

Description : Which microprocessor accepts the program written for 8086 without any changes?   (a) 8085 (b) 8088 (c) 80186 (d) 80188 

Last Answer : Which microprocessor accepts the program written for 8086 without any changes?   (a) 8085 (b) 8088 (c) 80186 (d) 80188 

In 8086 the overflow flag is set when _____.

Description : In 8086 the overflow flag is set when _____.   (a) The sum is more than 16 bits (b) Signed numbers go out of their range after an arithmetic operation (c) Carry and sign flags are set (d) Subtraction 

Last Answer : In 8086 the overflow flag is set when Signed numbers go out of their range after an arithmetic operation . 

The 8086 fetches instruction one after another from _____ of memory.

Description : The 8086 fetches instruction one after another from _____ of memory.   (a) Code segment (b) IP (c) ES (d) SS

Last Answer : Code segemnt

Have you heard of the gender neutral honorific title Mx?

Description : Have you heard of the gender neutral honorific title Mx?

Last Answer : answer:I have heard of it. I am just not sure when to use it. And given that it took Ms. a good twenty years to be considered somewhat acceptable, but still not at all universal, I don’t see it becoming widespread very quickly. And, the use of honorifics is falling by the wayside.

What should I look for when buying a used Mazda MX-5 ?

Description : What should I look for when buying a used Mazda MX-5 ?

Last Answer : Not the test drive to worry about. Take it to a GOOD mechanic and have the engine examined.

Do Freehand Mx have a "dynamic textbox" feature like... in Master Pages?

Description : Do Freehand Mx have a "dynamic textbox" feature like... in Master Pages?

Last Answer : I’ve been asking around, and people who works in print told me that freehand DOES NOT have that feature. period. (thats what they said)

For what value of m the ratio of the roots of the equation 12x^2 – mx + 5 = 0 is 3 : 2 ? -Maths 9th

Description : For what value of m the ratio of the roots of the equation 12x^2 – mx + 5 = 0 is 3 : 2 ? -Maths 9th

Last Answer : Given equation: 12x2+mx+5=0 The roots are in ratio 3:2 Hence,let roots of the equations are 3α and 2α. Applying condition for sum and product of the roots, 3α+2α=−12m​ and 3α×2α=125​⇒α2=725​⇒α=±62​5​​And m=−60α ⇒m=±510​Hence, A is the correct option.

If x^2 + mx + n = 0 and x^2 + px + q = 0 have a common root, then the common root is -Maths 9th

Description : If x^2 + mx + n = 0 and x^2 + px + q = 0 have a common root, then the common root is -Maths 9th

Last Answer : Let α be the common root ∴α2+pα+q=0 ...........(1) and α2+qα+p=0 ........ (2) Solving (1) & (2), we get, p2−q2α2​=q−pα​=q−p1​∴α=q−pp2−q2​ and α=1 ⇒q−pp2−q2​=1 ⇒p2−q2=q−p (or) (p2−q2)+(p−q)=0 ⇒(p−q)[p+q+1]=0 ⇒p−q=0 or p+q+1=0

For what value of m will the expression 3x^3 + mx^2 + 4x – 4m be divisible by x + 2 ? -Maths 9th

Description : For what value of m will the expression 3x^3 + mx^2 + 4x – 4m be divisible by x + 2 ? -Maths 9th

Last Answer : f(x) = 3x3 + mx2 + 4x – 4m f(x) is divisible by (x + 2) if f(–2) = 0 Now f(–2) = 3(–2)3 + m(–2)2 + 4(–2) – 4m = – 24 + 4m – ... ; 4m = – 32 ≠ 0 ∴ No such value of m exists for which (x + 2) is a factor of the given expression

What is y=mx+b for (-3,-3) and (0,-4)?

Description : What is y=mx+b for (-3,-3) and (0,-4)?

Last Answer : y = -1/3x - 4

how can I report a sales fraud in Cozumel,MX

Description : how can I report a sales fraud in Cozumel,MX

Last Answer : Need Answer

If `16l^2+9m^2=24lm+6l+8m+1` and the line `mx+ly=1` is tangent to circle `S_1=0` then the equation of circle `S_2=0` which touches `S_1=0` at `(0,0)`

Description : If `16l^2+9m^2=24lm+6l+8m+1` and the line `mx+ly=1` is tangent to circle `S_1=0` then the equation of circle `S_2=0` which touches `S_1=0` at `(0,0)`

Last Answer : If `16l^2+9m^2=24lm+6l+8m+1` and the line `mx+ly=1` is tangent to circle `S_1=0` then the equation of ... `3x^(2)+3y^(2)-8x-6y=0` D. none of theese

For what values of m does the equation, `mx^(2) + (3x-1)m + 2x + 5 = 0` have equal roots of opposite sign ?

Description : For what values of m does the equation, `mx^(2) + (3x-1)m + 2x + 5 = 0` have equal roots of opposite sign ?

Last Answer : For what values of m does the equation, `mx^(2) + (3x-1)m + 2x + 5 = 0` have equal roots of opposite sign ?

If `alpha, beta` are the roots of the quadratic equation `lx^(2) + mx + n = 0`,then evaluate the following expressions. (a) `alpha^(2) + beta^(2)` (b)

Description : If `alpha, beta` are the roots of the quadratic equation `lx^(2) + mx + n = 0`,then evaluate the following expressions. (a) `alpha^(2) + beta^(2)` (b)

Last Answer : If `alpha, beta` are the roots of the quadratic equation `lx^(2) + mx + n = 0`,then evaluate the following ... ) `1/(alpha^(3)) + 1/(beta^(3))`

If one roots of the equation `x^(2) - mx + n = 0` is twice the other root, then show that `2m^(2) = 9pi`.

Description : If one roots of the equation `x^(2) - mx + n = 0` is twice the other root, then show that `2m^(2) = 9pi`.

Last Answer : If one roots of the equation `x^(2) - mx + n = 0` is twice the other root, then show that `2m^(2) = 9pi`.

In `y=mx+c`, make c as the subject.

Description : In `y=mx+c`, make c as the subject.

Last Answer : In `y=mx+c`, make c as the subject.

Tijuana, MX, Mexico?

Description : Tijuana, MX, Mexico?

Last Answer : Tijuana, MX has become synonymous with spontaneous trips southof the border. Unlike Cancun, another popular U.S. touristdestination, Tijuana is only a few miles from the Californiaborder. In fact, ... , and the Tijuana Dragons, who are part of the AmericanBasketball League.Tijuana has done its

The final power amplifier in an FM transmitter usually operates class ______. A. AB B. C C. B D. A

Description : The final power amplifier in an FM transmitter usually operates class ______. A. AB B. C C. B D. A

Last Answer : B. C

The final power amplifier in an FM transmitter usually operates class ______.

Description : The final power amplifier in an FM transmitter usually operates class ______.

Last Answer : C

What is the difference between 8085 and 8086?

Description : What is the difference between 8085 and 8086?

Last Answer : The major difference between the 8085 and the 8086/8088 is that the 8085 is an 8 bit computer, and the 8086/8088 is a 16 bit computer.

What is the clock frequency of 8086 microprocessor?

Description : What is the clock frequency of 8086 microprocessor?

Last Answer : MAximum clock frequency of 8086 is 5MHZ.

Which of the following is not an XT microprocessor? A) 8006 B) 8086 C) 8088 D) None of above

Description : Which of the following is not an XT microprocessor? A) 8006 B) 8086 C) 8088 D) None of above

Last Answer : Answer : D

which are of these examples of Intel 8086 opcodes: a. MOV b. ADD c. SUB d. All of these

Description : which are of these examples of Intel 8086 opcodes: a. MOV b. ADD c. SUB d. All of these

Last Answer : d. All of these

Ingiven lines of code MOV AX,BL have different type of operands according to assembler for 8086 architecture these identifiers must be of. a. Different type only in byte b. Same type either in word or byte c. Botha &b d. None of these

Description : Ingiven lines of code MOV AX,BL have different type of operands according to assembler for 8086 architecture these identifiers must be of. a. Different type only in byte b. Same type either in word or byte c. Botha &b d. None of these

Last Answer : b. Same type either in word or byte

Why do we use two ground pins in the pin diagram of 8086?

Description : Why do we use two ground pins in the pin diagram of 8086?

Last Answer : Ans-There are basically two reasons for doing so one is to remove GROUND BOUNCE one more reason is circuit complexity demands a large amount of current flowing through the circuits and multiple grounds help in dissipating the accumulated heat so that device will be safe.

what is the main difference between 8085 and 8086 processors?

Description : what is the main difference between 8085 and 8086 processors?

Last Answer : Ans-8085 is a 8 bit microprocessor,having 16-bit address bus.8086 is a 16-bit microprocessor having 20-bit address bus.

Who was introduce the 80286 microprocessor updated on 8086,in 1983: a. Intel b. Motorola c. Fairchild d. None of these

Description : Who was introduce the 80286 microprocessor updated on 8086,in 1983: a. Intel b. Motorola c. Fairchild d. None of these

Last Answer : a. Intel

Which processor provided 1 MB memory: a. 16-bit 8086 and 8088 b. 32-bit 8086 and 8088 c. 64-bit 8086 and 8088 d. 8-bit 8086 and 8088

Description : Which processor provided 1 MB memory: a. 16-bit 8086 and 8088 b. 32-bit 8086 and 8088 c. 64-bit 8086 and 8088 d. 8-bit 8086 and 8088

Last Answer : a. 16-bit 8086 and 8088

How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Description : How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Last Answer : a. 2.5 Million instruction per second

Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Description : Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Last Answer : d. All of these

Intel used HMOS technology to recreate_____: a. 8084 A b. 8086 A c. 8085 A d. 8088 A

Description : Intel used HMOS technology to recreate_____: a. 8084 A b. 8086 A c. 8085 A d. 8088 A

Last Answer : c. 8085 A

In 8086 microprocessor one of the following instructions is executed before an arithmeticoperation a. AAM b) AAD c) DAS d) DAA

Description : In 8086 microprocessor one of the following instructions is executed before an arithmeticoperation a. AAM b) AAD c) DAS d) DAA

Last Answer : b) AAD

.How many transistors does the 8086 have?a) 10,000b ) 29,000 c) 110,000d) 129,000

Description : .How many transistors does the 8086 have?a) 10,000b ) 29,000 c) 110,000d) 129,000

Last Answer : ) 29,000

8087 connection to 8086, to enable the _________ bank of memory _______pins are to be connected. a) Lower, BHE b) Upper, BHE c) Lower, INT d) Upper, INT.

Description : 8087 connection to 8086, to enable the _________ bank of memory _______pins are to be connected. a) Lower, BHE b) Upper, BHE c) Lower, INT d) Upper, INT.

Last Answer : a) Lower, BHE

8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Description : 8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Last Answer : a) 8

8086 microprocessor is interfaced to 8253 a programmable interval timer. The maximum number by which the clock frequency on one of the timers is divided by a) 216 b) 28 c) 210 d) 220

Description : 8086 microprocessor is interfaced to 8253 a programmable interval timer. The maximum number by which the clock frequency on one of the timers is divided by a) 216 b) 28 c) 210 d) 220

Last Answer : d) 220

In 8086 microprocessor one of the following instructions is executed before an arithmetic operation a) AAM b) AAD c) DAS d) DAA

Description : In 8086 microprocessor one of the following instructions is executed before an arithmetic operation a) AAM b) AAD c) DAS d) DAA

Last Answer : b) AAD

What is the output of the following code AL=00110101 BL= 39H M. Krishna Kumar/IISc. Bangalore M2/V1/June 04/1 Microprocessors and Microcontrollers/Assembly language of 8086 Multiple Choice Questions SUB AL, BL AAS a) AL= 00000100, CF=1 b) BL=00000100, CF=0 c) AL=11111100 CF=1 d) BL= 00000100, CF=1

Description : What is the output of the following code AL=00110101 BL= 39H M. Krishna Kumar/IISc. Bangalore M2/V1/June 04/1 Microprocessors and Microcontrollers/Assembly language of 8086 Multiple Choice Questions SUB AL, BL AAS ... , CF=1 b) BL=00000100, CF=0 c) AL=11111100 CF=1 d) BL= 00000100, CF=1

Last Answer : b) BL=00000100, CF=0

n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Description : n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Last Answer : a) NMI

BHE of 8086 microprocessor signal is used to interface the a) Even bank memory b) Odd bank memory c) I/O d) DMA

Description : BHE of 8086 microprocessor signal is used to interface the a) Even bank memory b) Odd bank memory c) I/O d) DMA

Last Answer : b) Odd bank memory

In 8086 the overflow flag is set when a) The sum is more than 16 bits b) Signed numbers go out of their range after an arithmetic operation c) Carry and sign flags are set

Description : In 8086 the overflow flag is set when a) The sum is more than 16 bits b) Signed numbers go out of their range after an arithmetic operation c) Carry and sign flags are set

Last Answer : b) Signed numbers go out of their range after an arithmetic operation

In 8086, Example for Non maskable interrupts are a) Trapb) RST6.5 c) INTR

Description : In 8086, Example for Non maskable interrupts are a) Trapb) RST6.5 c) INTR

Last Answer : a) Trap