In 8086 the overflow flag is set when a) The sum is more than 16 bits b) Signed numbers go out of their range after an arithmetic operation c) Carry and sign flags are set

In 8086 the overflow flag is set when  
a) The sum is more than 16 bits  
b) Signed numbers go out of their range after an arithmetic operation  c) Carry and sign flags are set
by

1 Answer

Answer :

b) Signed numbers go out of their range after an arithmetic operation
by

Related questions

A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Description : A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Last Answer : a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory.

In 8086 microprocessor one of the following instructions is executed before an arithmetic operation a) AAM b) AAD c) DAS d) DAA

Description : In 8086 microprocessor one of the following instructions is executed before an arithmetic operation a) AAM b) AAD c) DAS d) DAA

Last Answer : b) AAD

In 8086 the overflow flag is set when _____.

Description : In 8086 the overflow flag is set when _____.   (a) The sum is more than 16 bits (b) Signed numbers go out of their range after an arithmetic operation (c) Carry and sign flags are set (d) Subtraction 

Last Answer : In 8086 the overflow flag is set when Signed numbers go out of their range after an arithmetic operation . 

Which are the flags of status register: a. Over flow flag b. Carry flag c. Half carry flag d. Zero flag e. Interrupt flag f. Negative flag g. All of these

Description : Which are the flags of status register: a. Over flow flag b. Carry flag c. Half carry flag d. Zero flag e. Interrupt flag f. Negative flag g. All of these

Last Answer : g. All of these

The 16 bit flag of 8086 microprocessor is responsible to indicate ___________

Description : The 16 bit flag of 8086 microprocessor is responsible to indicate ___________ A. the condition of result of ALU operation B. the condition of memory C. the result of addition D. the result of subtraction 

Last Answer : The 16 bit flag of 8086 microprocessor is responsible to indicate the condition of result of ALU operation

State the use of OF and DF flags of 8086 microprocessor.

Description : State the use of OF and DF flags of 8086 microprocessor.

Last Answer : Overflow Flag: This flag is set if an overflow occurs, i.e. if the result of a signed operation is large enough to be accommodated in destination register. Direction Flag: It selects either increment or decrement mode for DI &/or SI register during string instructions.

Write an algorithm to subtract two 16 bit numbers (With borrow) in 8086 microprocessor.

Description : Write an algorithm to subtract two 16 bit numbers (With borrow) in 8086 microprocessor.

Last Answer : Algorithm for 16 bit numbers subtraction with borrow: 1. Load 0000H into CX register (for borrow) 2. Load the first number into AX(accumulator) 3. Load the second number into BX register 4. Subtract ... . Move data from AX(accumulator) to memory 8. Move data from CX register to memory 9. Stop

In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Description : In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Last Answer : (A) set, reset

Which processor provided 1 MB memory: a. 16-bit 8086 and 8088 b. 32-bit 8086 and 8088 c. 64-bit 8086 and 8088 d. 8-bit 8086 and 8088

Description : Which processor provided 1 MB memory: a. 16-bit 8086 and 8088 b. 32-bit 8086 and 8088 c. 64-bit 8086 and 8088 d. 8-bit 8086 and 8088

Last Answer : a. 16-bit 8086 and 8088

Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Description : Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Last Answer : d. All of these

8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Description : 8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Last Answer : a) 8

In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit

Description : In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit

Last Answer : In 8086 microprocessor, the address bus is 20 bit

The intel 8086 microprocessor is a _______ processor A. 8 bit B. 16 bit C. 32 bit D. 4 bit

Description : The intel 8086 microprocessor is a _______ processor A. 8 bit B. 16 bit C. 32 bit D. 4 bit

Last Answer : The intel 8086 microprocessor is a 16 bit processor 

Virtual Mode Flag bit can be set using ____ instruction or any task switch operation only in the _____ mode a) IRET, Virtual b) POPF, Real c) IRET, protected d) POPF, protected

Description : Virtual Mode Flag bit can be set using ____ instruction or any task switch operation only in the _____ mode a) IRET, Virtual b) POPF, Real c) IRET, protected d) POPF, protected

Last Answer : b) POPF, Real

When signed numbers are used in binary arithmetic, then which one of the following notations would have unique representation for zero. (A) Sign-magnitude. (B) 1’s complement. (C) 2’s complement. (D) 9’s complement.

Description : When signed numbers are used in binary arithmetic, then which one of the following notations would have unique representation for zero. (A) Sign-magnitude. (B) 1’s complement. (C) 2’s complement. (D) 9’s complement.

Last Answer : (A) Sign-magnitude.

CPU does not perform the operation a. data transfer b. logic operation c. arithmetic operation d. all of above

Description : CPU does not perform the operation a. data transfer b. logic operation c. arithmetic operation d. all of above

Last Answer : b. logic operation

The secondary storage devices can only store data but they cannot perform a. Arithmetic Operation b. Logic operation c. Fetch operations d. Either of the above

Description : The secondary storage devices can only store data but they cannot perform a. Arithmetic Operation b. Logic operation c. Fetch operations d. Either of the above

Last Answer : d. Either of the above

Who was introduce the 80286 microprocessor updated on 8086,in 1983: a. Intel b. Motorola c. Fairchild d. None of these

Description : Who was introduce the 80286 microprocessor updated on 8086,in 1983: a. Intel b. Motorola c. Fairchild d. None of these

Last Answer : a. Intel

How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Description : How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Last Answer : a. 2.5 Million instruction per second

Intel used HMOS technology to recreate_____: a. 8084 A b. 8086 A c. 8085 A d. 8088 A

Description : Intel used HMOS technology to recreate_____: a. 8084 A b. 8086 A c. 8085 A d. 8088 A

Last Answer : c. 8085 A

In 8086 microprocessor one of the following instructions is executed before an arithmeticoperation a. AAM b) AAD c) DAS d) DAA

Description : In 8086 microprocessor one of the following instructions is executed before an arithmeticoperation a. AAM b) AAD c) DAS d) DAA

Last Answer : b) AAD

.How many transistors does the 8086 have?a) 10,000b ) 29,000 c) 110,000d) 129,000

Description : .How many transistors does the 8086 have?a) 10,000b ) 29,000 c) 110,000d) 129,000

Last Answer : ) 29,000

In 8086 microprocessor one of the following statements is not true.a)Coprocessor is interfaced in MAX mode b)Coprocessor is interfaced in MIN mode c)I/O can be interfaced in MAX / MIN moded)Supports pipelining

Description : In 8086 microprocessor one of the following statements is not true.a)Coprocessor is interfaced in MAX mode b)Coprocessor is interfaced in MIN mode c)I/O can be interfaced in MAX / MIN moded)Supports pipelining

Last Answer : b)Coprocessor is interfaced in MIN mode

8087 connection to 8086, to enable the _________ bank of memory _______pins are to be connected. a) Lower, BHE b) Upper, BHE c) Lower, INT d) Upper, INT.

Description : 8087 connection to 8086, to enable the _________ bank of memory _______pins are to be connected. a) Lower, BHE b) Upper, BHE c) Lower, INT d) Upper, INT.

Last Answer : a) Lower, BHE

8086 microprocessor is interfaced to 8253 a programmable interval timer. The maximum number by which the clock frequency on one of the timers is divided by a) 216 b) 28 c) 210 d) 220

Description : 8086 microprocessor is interfaced to 8253 a programmable interval timer. The maximum number by which the clock frequency on one of the timers is divided by a) 216 b) 28 c) 210 d) 220

Last Answer : d) 220

What is the output of the following code AL=00110101 BL= 39H M. Krishna Kumar/IISc. Bangalore M2/V1/June 04/1 Microprocessors and Microcontrollers/Assembly language of 8086 Multiple Choice Questions SUB AL, BL AAS a) AL= 00000100, CF=1 b) BL=00000100, CF=0 c) AL=11111100 CF=1 d) BL= 00000100, CF=1

Description : What is the output of the following code AL=00110101 BL= 39H M. Krishna Kumar/IISc. Bangalore M2/V1/June 04/1 Microprocessors and Microcontrollers/Assembly language of 8086 Multiple Choice Questions SUB AL, BL AAS ... , CF=1 b) BL=00000100, CF=0 c) AL=11111100 CF=1 d) BL= 00000100, CF=1

Last Answer : b) BL=00000100, CF=0

8088 microprocessor differs with 8086 microprocessor in a) Data width on the output b) Address capability c) Support of coprocessor d) Support of MAX / MIN mode

Description : 8088 microprocessor differs with 8086 microprocessor in a) Data width on the output b) Address capability c) Support of coprocessor d) Support of MAX / MIN mode

Last Answer : a) Data width on the output

In 8086 microprocessor one of the following statements is not true. a) Coprocessor is interfaced in MAX mode b) Coprocessor is interfaced in MIN mode c) I/O can be interfaced in MAX / MIN mode

Description : In 8086 microprocessor one of the following statements is not true. a) Coprocessor is interfaced in MAX mode b) Coprocessor is interfaced in MIN mode c) I/O can be interfaced in MAX / MIN mode

Last Answer : b) Coprocessor is interfaced in MIN mode

n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Description : n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Last Answer : a) NMI

BHE of 8086 microprocessor signal is used to interface the a) Even bank memory b) Odd bank memory c) I/O d) DMA

Description : BHE of 8086 microprocessor signal is used to interface the a) Even bank memory b) Odd bank memory c) I/O d) DMA

Last Answer : b) Odd bank memory

In 8086, Example for Non maskable interrupts are a) Trapb) RST6.5 c) INTR

Description : In 8086, Example for Non maskable interrupts are a) Trapb) RST6.5 c) INTR

Last Answer : a) Trap

Define memory segmentation. How memory segmentation is achieved in 8086? State advantages of memory segmentation.

Description : Define memory segmentation. How memory segmentation is achieved in 8086? State advantages of memory segmentation.

Last Answer : Memory Segmentation: The memory in an 8086 microprocessor is organized as a segmented memory. The physical memory is divided into 4 segments namely, - Data segment, Code Segment, Stack Segment and Extra ... 16 bit size. 6) Programs and data can be stored separately from each other in segmentation.

Enlist any four addressing modes of 8086 microprocessor.

Description : Enlist any four addressing modes of 8086 microprocessor.

Last Answer : Addressing modes of 8086 : 1. Immediate 2. Direct 3. Register 4. Register indirect 5. Indexed 6. Register relative 7. Based indexed 8. Relative based indexed 9. Implied

Describe the functions of General purpose registers of 8086 microprocessor.

Description : Describe the functions of General purpose registers of 8086 microprocessor.

Last Answer : (i) General Purpose Registers of 8086 1. AX (Accumulator) - Used to store the result for arithmetic / logical operations All I/O data transfer using IN & OUT instructions use A ... Index - acts as the destination for string movement instructions Used to hold offset address of Extra segment.

Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)

Description : Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)

Last Answer : a. BYTE

For a memory with a 16-bit address space, the addressability is a. 16 bits b. 8 bits c. 2^16 bits d. Cannot be determined

Description : For a memory with a 16-bit address space, the addressability is a. 16 bits b. 8 bits c. 2^16 bits d. Cannot be determined

Last Answer : d. Cannot be determined

The Width of a processor’s data path is measured in bits. Which of the following are common data paths? a. 8 bits b. 12 bits c. 16 bits d. 32 bits

Description : The Width of a processor’s data path is measured in bits. Which of the following are common data paths? a. 8 bits b. 12 bits c. 16 bits d. 32 bits

Last Answer : a. 8 bits

The processor 80386/80486 and the Pentium processor uses _____ bits address bus: a. 16 b. 32 c. 36 d. 64

Description : The processor 80386/80486 and the Pentium processor uses _____ bits address bus: a. 16 b. 32 c. 36 d. 64

Last Answer : b. 32

A full adder is a combinational circuit that performs the arithmetic sum of three input bits and produces a

Description : A full adder is a combinational circuit that performs the arithmetic sum of three input bits and produces a (a) sum output (b) sum output and a carry (c) sum output with two carries (d) two sums with two carries

Last Answer : A full adder us an a combination logical circuit which will produces an sum and carry when ever more than two inputs were given.

Registers which are partially visible to users and used to hold conditional codes (bits set by the CPU hardware as the result of operations), are known as A) PC B) Flags C) Memory Address Registers D) General Purpose Registers

Description : Registers which are partially visible to users and used to hold conditional codes (bits set by the CPU hardware as the result of operations), are known as A) PC B) Flags C) Memory Address Registers D) General Purpose Registers

Last Answer : Answer : B

Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Description : Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : a) IE

Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Description : Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : d) RI, TI

Registers, which are partially visible to users and used to hold conditional, are known as a. PC b. Memory address registers c. General purpose register d. Flags

Description : Registers, which are partially visible to users and used to hold conditional, are known as a. PC b. Memory address registers c. General purpose register d. Flags

Last Answer : c. General purpose register

Serial port vector address is of _______. And causes an interrupt when ________. a) 0013H, either TI or RI flag is set b) 0023H, either TI or RI flag is reset c) 0013H, either TI or RI flag is reset d) 0023H, either TI or RI flag is set

Description : Serial port vector address is of _______. And causes an interrupt when ________. a) 0013H, either TI or RI flag is set b) 0023H, either TI or RI flag is reset c) 0013H, either TI or RI flag is reset d) 0023H, either TI or RI flag is set

Last Answer : a) 0013H, either TI or RI flag is set

Which operation are binary type, and are performed on bits string that is placed in register: a. Logical micro operation b. Arithmetic micro operation c. Both d. None

Description : Which operation are binary type, and are performed on bits string that is placed in register: a. Logical micro operation b. Arithmetic micro operation c. Both d. None

Last Answer : a. Logical micro operation

Write an algorithm and draw the flowchart to find sum of series of numbers.

Description : Write an algorithm and draw the flowchart to find sum of series of numbers. 

Last Answer : Algorithim to find sum of series of numbers: 1. Initialize data segment 2. Initialize byte counter and memory pointer to read number from array. 3. Initialize sum variable to 0 4. sum=sum+number from array ... Decrement byte counter 9. If byte counter=0 then step 10 else step 4 10. Stop

The OF is called as _______ A. overflow flag B. overdue flag C. one flag D. over flag

Description : The OF is called as _______ A. overflow flag B. overdue flag C. one flag D. over flag 

Last Answer : The OF is called as overflow flag

Pick the one that is used for logical operations or comparisons such as less than equal to or greater than. a. Arithmetic and Logic Unit b. Control Unit c. Both of above

Description : Pick the one that is used for logical operations or comparisons such as less than equal to or greater than. a. Arithmetic and Logic Unit b. Control Unit c. Both of above

Last Answer : a. Arithmetic and Logic Unit

The contents of Register (BL) and Register (AL) of 8085 microprocessor are 49H and 3AH respectively. The contents of AL, the status of carry flag (CF) and sign flag (SF) after executing 'SUB AL, BL' assembly language instruction, are (1) AL=0FH; CF=1; SF=1 (2) AL=F0H; CF=0; SF=0 (3) AL=F1H; CF=1; SF=1 (4) AL=1FH; CF=1; SF=1

Description : The contents of Register (BL) and Register (AL) of 8085 microprocessor are 49H and 3AH respectively. The contents of AL, the status of carry flag (CF) and sign flag (SF) after executing 'SUB AL, BL' assembly language instruction, are ( ... ; CF=0; SF=0 (3) AL=F1H; CF=1; SF=1 (4) AL=1FH; CF=1; SF=1

Last Answer : Answer: 3