The development of excessive test voltages is avoided by the use of meggers equipped with what device?

The development of excessive test voltages is avoided by  the use of meggers equipped with what device?
by

1 Answer

Answer :

Friction clutches.
by

Related questions

The development of excessive test voltages is avoided by the use of meggers equipped with what device?

Description : The development of excessive test voltages is avoided by the use of meggers equipped with what device?

Last Answer : Friction clutches

Most meggers you will use are rated at what voltage?

Description : Most meggers you will use are rated at what voltage?

Last Answer : 500.

Most meggers you will use are rated at what voltage?

Description : Most meggers you will use are rated at what voltage?

Last Answer : 500.

When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease (which one) in the resistance of the regulating device.

Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease (which one) in the resistance of the regulating device.

Last Answer : An increase.

When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease in the resistance of the regulating device.

Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease in the resistance of the regulating device.

Last Answer : Increase.

Discharge switches are often located on hand-driven meggers. The purpose of these switches is to discharge capacitive charges stored in the _____________. A. megger hand generator B. megger movement coils C. tested equipment while conducting test D. tested equipment after testing

Description : Discharge switches are often located on hand-driven meggers. The purpose of these switches is to discharge capacitive charges stored in the _____________. A. megger hand generator B. megger movement coils C. tested equipment while conducting test D. tested equipment after testing

Last Answer : Answer: D

When you are using an ohmmeter to test a transistor, what range settings should be avoided?

Description : When you are using an ohmmeter to test a transistor, what range settings should be avoided?

Last Answer : Any range setting that produces a current flow through the transistor that exceeds 1 milliamp (usually R x 1 range)

Violent gassing developed by a lead-acid battery during charging indicates that the ____________. A. plate separators are grounded B. cell voltages are excessive C. specific gravity in insufficient D. charging rate is excessive

Description : Violent gassing developed by a lead-acid battery during charging indicates that the ____________. A. plate separators are grounded B. cell voltages are excessive C. specific gravity in insufficient D. charging rate is excessive

Last Answer : Answer: D

When charging lead-acid batteries, you should reduce the charging rate as the battery nears its full charge capacity to ______________. A. prevent excessive gassing and overheating B. allow equalization of cell voltages C. reduce lead sulfate deposits D. increase lead peroxide formation

Description : When charging lead-acid batteries, you should reduce the charging rate as the battery nears its full charge capacity to ______________. A. prevent excessive gassing and overheating B. allow equalization of cell voltages C. reduce lead sulfate deposits D. increase lead peroxide formation

Last Answer : Answer: A

Consider the following statements: Web crippling due to excessive bearing stress can be avoided by 1. Increasing the web thickness 2. providing suitable stiffeners 3. Increasing the length of the bearing plates Which of these statements are correct? (a) 1 and 2 only (b) 2 and 3 only (c) 1 and 3 only (d) 1, 2 and 3

Description : Consider the following statements: Web crippling due to excessive bearing stress can be avoided by 1. Increasing the web thickness 2. providing suitable stiffeners 3. Increasing the length of the bearing plates Which of these statements are ... only (b) 2 and 3 only (c) 1 and 3 only (d) 1, 2 and 3

Last Answer : (d) 1, 2 and 3

How can problems of "excessive vibration or noise" due to piping strain be avoided on steam turbines?

Description : How can problems of "excessive vibration or noise" due to piping strain be avoided on steam turbines?

Last Answer : 1. The inlet as well as exhaust steam lines should be firmly supported to avoid strains from being imposed on the turbine. 2. Adequate allowance should be made for expansion of steam pipes due to heat.

In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Description : In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Last Answer : Nonresonant (circuit is either above or below resonance)

What three things prevent a CT rotor from turning when voltages are applied to its stator windings?

Description : What three things prevent a CT rotor from turning when voltages are applied to its stator windings?

Last Answer : The rotor is specially wound, it is never connected to an ac supply, and its output is always applied to a high-impedance load.

What is the relationship between the transmitter and receiver stator voltages when their rotors are in correspondence?

Description : What is the relationship between the transmitter and receiver stator voltages when their rotors are in correspondence?

Last Answer : The voltages are equal and oppose each other.

What are the most common insulators used for extremely high voltages?

Description : What are the most common insulators used for extremely high voltages?

Last Answer : Varnished cambric and oil-impregnated paper.

If the load requirement consists of both positive and negative voltages, what technique is used in the voltage divider to supply the loads from a single voltage source?

Description : If the load requirement consists of both positive and negative voltages, what technique is used in the voltage divider to supply the loads from a single voltage source?

Last Answer : The ground (reference point) is placed in the proper point in the voltage divider so that positive and negative voltages are supplied

In a three-phase alternator, what is the phase relationship between the individual output voltages?

Description : In a three-phase alternator, what is the phase relationship between the individual output voltages?

Last Answer : Each phase is displaced 120º from the other two

What is the relationship of the voltage at C in figure 3-7 to the voltages at A and B?

Description : What is the relationship of the voltage at C in figure 3-7 to the voltages at A and B?

Last Answer : C is 1.414 times greater than A or B.

What determines the phase relationship between the voltages in a two-phase ac generator?

Description : What determines the phase relationship between the voltages in a two-phase ac generator?

Last Answer : Placement of armature coils.

In single-phase alternators, in order for the voltages induced in all the armature windings to add together for a single output, how must the windings be connected?

Description : In single-phase alternators, in order for the voltages induced in all the armature windings to add together for a single output, how must the windings be connected?

Last Answer : In series.

A three-phase electrical system is equipped with ground detecting lamps. If one of the lamp goes dark and the other two burn normally before and after the test switch is operated, this indicates _______________. A. the dark lamp must be replaced B. there is a ground in the line with the dark lamp C. there are grounds in two of the three phases D. the voltage to the dark lamp is less than that of the system

Description : A three-phase electrical system is equipped with ground detecting lamps. If one of the lamp goes dark and the other two burn normally before and after the test switch is operated, this indicates _______________. ... of the three phases D. the voltage to the dark lamp is less than that of the system

Last Answer : Answer: A

How do you prevent excessive heat buildup on an area of a board when soldering multilead components?

Description : How do you prevent excessive heat buildup on an area of a board when soldering multilead components?

Last Answer : Use a skipping pattern

Name the procedure used to reduce excessive arcing in a magnetron?

Description : Name the procedure used to reduce excessive arcing in a magnetron?

Last Answer : Baking in.

How does relative humidity over 95% cause excessive tape and head wear?

Description : How does relative humidity over 95% cause excessive tape and head wear?

Last Answer : High humidity causes increased friction as the tape passes over the heads.

What is an excessive heat condition?

Description : What is an excessive heat condition?

Last Answer : A condition in which the heat in or around the circuit increases to a higher than normal level

What is an excessive current condition?

Description : What is an excessive current condition?

Last Answer : A condition that is not a direct short but in which circuit current increases beyond the designed current carrying ability of the circuit.

When troubleshooting a console circuit card suspected of being faulty, first check operating voltages, clean the card and then _________________. A. make sure wired connections and push-on connectors are tight B. test each resistor and capacitor on the card with an ohmmeter C. check the continuity of all printed circuit traces with an ohmmeter D. measure the gain of each transistor or integrated circuit

Description : When troubleshooting a console circuit card suspected of being faulty, first check operating voltages, clean the card and then _________________. A. make sure wired connections and push-on connectors ... circuit traces with an ohmmeter D. measure the gain of each transistor or integrated circuit

Last Answer : Answer: A

In the guidance of learning a teacher has many important roles. Which one of the following is the least important aspect of the teachers’ role in the guidance of learning? Options: A) The provision of continuous diagnostic and remedial help. B) The forestalling of habits. C) The provision of encouragement and moral support. D) The development of insight into what constitute the pitfalls and danger to be avoided.

Description : In the guidance of learning a teacher has many important roles. Which one of the following is the least important aspect of the teachers' role in the guidance of learning? Options: A) The ... moral support. D) The development of insight into what constitute the pitfalls and danger to be avoided.

Last Answer : D) The development of insight into what constitute the pitfalls and danger to be avoided.

Which is the most important aspect of the teacher’s role in learning? Options: A) The development of insight into what constitutes an adequate performance B) The development of insight into what constitutes the pitfalls and dangers to be avoided C) The provision of encouragement and moral support D) The provision of continuous diagnostic and remedial help

Description : Which is the most important aspect of the teacher's role in learning? Options: A) The development of insight into what constitutes an adequate performance B) The development of insight ... The provision of encouragement and moral support D) The provision of continuous diagnostic and remedial help

Last Answer : A) The development of insight into what constitutes an adequate performance 

Which of the following is the least important aspect of the teacher's role in the guidance of learning? Options: A) The development of insight into what constitutes an adequate performance B) The development of insight into what constitute the pitfalls and dangers to be avoided C) The provision of continuous diagnostic and remedial help D) The fore-stalling of habits

Description : Which of the following is the least important aspect of the teacher's role in the guidance of learning? Options: A) The development of insight into what constitutes an adequate performance B) The ... avoided C) The provision of continuous diagnostic and remedial help D) The fore-stalling of habits

Last Answer : B) The development of insight into what constitute the pitfalls and dangers to be avoided

Which is the most important aspect of the teacher’s role in learning? (A) The development of insight into what constitutes an adequate performance (B) The development of insight into what constitutes the pitfalls and dangers to be avoided (C) The provision of encouragement and moral support (D) The provision of continuous diagnostic and remedial help

Description : Which is the most important aspect of the teacher's role in learning? (A) The development of insight into what constitutes an adequate performance (B) The development of insight into ... The provision of encouragement and moral support (D) The provision of continuous diagnostic and remedial help

Last Answer : (C) The provision of encouragement and moral support

Do you think that electric cars should be equipped with some sort of noise-maker, to alert pedestrians to their presence?

Description : Do you think that electric cars should be equipped with some sort of noise-maker, to alert pedestrians to their presence?

Last Answer : Read this: http://www.nhtsa.gov/SampleSounds

Are driverless cars equipped for accidents?

Description : Are driverless cars equipped for accidents?

Last Answer : It’ll cause accidents to plummet and they’ll be equipped

Should civilian airliners be equipped with those deflective flares that fighter jets have?

Description : Should civilian airliners be equipped with those deflective flares that fighter jets have?

Last Answer : Or would it be to costly and we all know no one is supposed to fire upon a civilian airliner.

Do modern cars that are NOT equipped with GPS still have devices that could be activated to track you?

Description : Do modern cars that are NOT equipped with GPS still have devices that could be activated to track you?

Last Answer : If the car has an integrated cellular phone, that can be used at the very least to see where you have been. Also if you have installed Lo-Jack, that is meant as a means of tracking the car’s location.

How should a wildlife traveller be equipped?

Description : How should a wildlife traveller be equipped?

Last Answer : answer:You should give an example of where, conditions, and for how long, and what kind of wildlife will you encounter. SWPL pretty much sums it up, but I'll blow hard. I believe statistically ... Port wine. It is a mysterious and magical drink by a campfire. Nothing goes with campfire like Port.

What is the single most important skill one must be equipped with before graduating from high school?

Description : What is the single most important skill one must be equipped with before graduating from high school?

Last Answer : Social Skills. Meaning manners dealing with table manners and conversational manners. That is one of the most important things that will help you succeed in most jobs.

The gas chambers that looked like bathrooms, equipped with fake shower heads, were labelled as _______ . -History 9th

Description : The gas chambers that looked like bathrooms, equipped with fake shower heads, were labelled as _______ . -History 9th

Last Answer : Mass killings were termed special treatment, final solution (for the Jews), euthanasia (for the disabled), selection and disinfections. ‘Evacuation’ meant deporting people to gas chambers. They were labelled ‘disinfection-areas’, and looked like bathrooms equipped with fake showerheads.

Why apple iPhone 13 series or will be equipped with LTPO technology OLED screen?

Description : Why apple iPhone 13 series or will be equipped with LTPO technology OLED screen?

Last Answer : iBee Parts - Professional Factory Supplier For iPhone Samsung Huawei LCD Screen & Battery Repair Parts Replacement. Currently, Samsung Galaxy Note 20 Ultra 5G is the world's first display with ... this function.iBee Parts （ Professional Factory Supplier For iPhone Samsung Huawei LCD Screen & Bat

How is the octopus equipped to grip things.?

Description : How is the octopus equipped to grip things.?

Last Answer : each arm is equipped with two rows of ,deeply set suckers thatgive a powerful grip.

Does the new Dodge Ram truck come equipped with GPS standard?

Description : Does the new Dodge Ram truck come equipped with GPS standard?

Last Answer : No the newest model year Dodge Ram series trucks don't come equipped with Gps as a standard feature. However, you may purchase a GPS device either separately or from the trucks dealer.

What year cars are equipped with a breathalyzer system?

Description : What year cars are equipped with a breathalyzer system?

Last Answer : They do not come standard on cars but they will be installed if you get a dui. They will have the breathalyzer installed on your car and you have to pay for it so the best thing is to not drink and drive.

my dad and i are caregivers for my wheelchair bound step-mom with limited income.we are looking for a van equipped for a wheelchair around $3000 can you help?

Description : my dad and i are caregivers for my wheelchair bound step-mom with limited income.we are looking for a van equipped for a wheelchair around $3000 can you help?

Last Answer : there is a site called the autobuyguide.com where you can locate this kind of van

Which stores sell converter boxes for old TV sets that are not equipped to receive digital signals?

Description : Which stores sell converter boxes for old TV sets that are not equipped to receive digital signals?

Last Answer : At Amazon.com you will be able to find a great variety of converter boxes for old TV sets that are not equipped to receive digital signals, and the prices are affordable

Which brands of laptops are equipped with Skype capabilities?

Description : Which brands of laptops are equipped with Skype capabilities?

Last Answer : Newer models of laptops are coming equipped with Skype, but that also means there's a higher price tagged on. Even though you can install Skype yourself on a cheaper computer, it would probably be wisest to spend the extra money for a smoother running computer.

Which country equipped Israel's air force and was the main reason for the destruction of the Arab armies in the Six-Day War ?

Description : Which country equipped Israel's air force and was the main reason for the destruction of the Arab armies in the Six-Day War ?

Last Answer : France. The IAF was equipped with Dassault Mystere and Mirage aircraft from France during the Six Day War.

Which country equipped Israel's air force and was the main reason for the destruction of the Arab armies in the Six-Day War ?

Description : Which country equipped Israel's air force and was the main reason for the destruction of the Arab armies in the Six-Day War ?

Last Answer : France. The IAF was equipped with Dassault Mystere and Mirage aircraft from France during the Six Day War.