In describing a switch by the number of positions of the actuator, what are the two possible configurations for a single pole, double-throw switch?

In describing a switch by the number of positions of the  actuator, what are the two possible configurations for a single pole, double-throw switch?
by

1 Answer

Answer :

Two-position and three-position.
by

Related questions

As shown in the illustration, 'B' is a ____________. EL-0058 A. single-pole, double-throw switch B. double-pole, single-throw switch C. double-pole, double-throw switch D. circuit breaker

Description : As shown in the illustration, 'B' is a ____________. EL-0058 A. single-pole, double-throw switch B. double-pole, single-throw switch C. double-pole, double-throw switch D. circuit breaker

Last Answer : Answer: C

What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Description : What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Last Answer : Common emitter (CE) and common base (CB)

'A-1', as shown in the illustration, is/are ____________. EL-0017 A. normally-closed overload relay contacts B. a double pole knife switch C. normally-open overload relay contacts D. a single pole knife switch

Description : 'A-1', as shown in the illustration, is/are ____________. EL-0017 A. normally-closed overload relay contacts B. a double pole knife switch C. normally-open overload relay contacts D. a single pole knife switch

Last Answer : Answer: A

There are two types of tape transport configurations, open loop capstan drive and closed-loop capstan drive. What are two major disadvantages of open-loop capstan drive tape transports?

Description : There are two types of tape transport configurations, open loop capstan drive and closed-loop capstan drive. What are two major disadvantages of open-loop capstan drive tape transports?

Last Answer : a. Only operates in one direction. b. The tape tension and head-to-tape contact can vary.

What term is used to identify each of the many field configurations that can exist in waveguides?

Description : What term is used to identify each of the many field configurations that can exist in waveguides?

Last Answer : Mode of operation.

What are the three transistor configurations?

Description : What are the three transistor configurations?

Last Answer : Common emitter (CE), common base (CB), and common collector (CC)

What are the three basic configurations of transistor oscillators?

Description : What are the three basic configurations of transistor oscillators?

Last Answer : Common collector (CC), common emitter (CE), and common base (CB).

If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the helm B. move in one direction only regardless of the movement of the helm C. not respond to output from the rotary actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Description : If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the ... actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Last Answer : Answer: A

Explain the operational aspects of limit switch and torque switch in rotork valve actuator.

Description : Explain the operational aspects of limit switch and torque switch in rotork valve actuator. 

Last Answer : a. When limit function is selected?  b. When torque function is selected?  Limit function - when limit function is selected in rotork valve, the limit switches will operate when the limit set ... . The limit switches will not act (only torque switch will act when selected to torque function). 

In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.

You are standing in front of a room with one lightbulb inside of it. You cannot see if it is on or off. Outside the room, there are 3 switches in the off positions. You may turn the switches any way you want to. You stop turning the switches, enter the room and know which switch controls the lightbulb. How? -Riddles

Description : You are standing in front of a room with one lightbulb inside of it. You cannot see if it is on or off. Outside the room, there are 3 switches in the off positions. You may turn the ... to. You stop turning the switches, enter the room and know which switch controls the lightbulb. How? -Riddles

Last Answer : You turn 2 switches 'on' and leave 1 switch 'off' and wait about a minute. Then enter the room, but just before you enter, turn one switch from 'on' to 'off'. Once in the room, feel the lightbulb - ... switch left on. If it is cold and is off, it has to be the switch you left in the off position.

How often should you switch positions when doing CPR?

Description : How often should you switch positions when doing CPR?

Last Answer : What is the answer ?

The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults could be the cause? EL-0102 A. Master switch contact 'MS3' may have defective springs. B. Contactor '3M' coil could have an open winding. C. Contact '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.

Description : The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults ... '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.

Last Answer : Answer: A

. What term is used in describing the science of sound?

Description : . What term is used in describing the science of sound?

Last Answer : Acoustics

If an ac voltmeter is connected between the S2 and S3 windings on a TX, at what two rotor positions should the voltmeter read maximum voltage?

Description : If an ac voltmeter is connected between the S2 and S3 windings on a TX, at what two rotor positions should the voltmeter read maximum voltage?

Last Answer : . 150º and 330º

All active prostaglandins have atleast one double bond between positions: (A) 7 and 8 (B) 9 and 10 (C) 11 and 12 (D) 13 and 14 FATS AND FATTY ACID METABOLISM 95

Description : All active prostaglandins have atleast one double bond between positions: (A) 7 and 8 (B) 9 and 10 (C) 11 and 12 (D) 13 and 14 FATS AND FATTY ACID METABOLISM 95

Last Answer : Answer : A

All active prostaglandins have at least one double bond between positions (A) 7 and 8 (B) 10 and 11 (C) 13 and 14 (D) 16 and 17

Description : All active prostaglandins have at least one double bond between positions (A) 7 and 8 (B) 10 and 11 (C) 13 and 14 (D) 16 and 17

Last Answer : Answer : A

The compressibility of clays is caused due to: (A) Expulsion of double layer water from in between the grains (B) Sliping of particles to new positions of greater density (C) Bending of particles as elastic sheets (D) All the above

Description : The compressibility of clays is caused due to: (A) Expulsion of double layer water from in between the grains (B) Sliping of particles to new positions of greater density (C) Bending of particles as elastic sheets (D) All the above

Last Answer : (D) All the above

In what direction are component leads clinched on single and double-sided boards?

Description : In what direction are component leads clinched on single and double-sided boards?

Last Answer : In the direction of the run.

The single parameter model proposed for describing non-ideal flow is the __________ model. (A) Tank in series (B) Dispersion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The single parameter model proposed for describing non-ideal flow is the __________ model. (A) Tank in series (B) Dispersion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The complex ion . `[M(en)Br_(2)I_(2)]^(-1)`, has two optical isomers. Their correct configurations are:

Description : The complex ion . `[M(en)Br_(2)I_(2)]^(-1)`, has two optical isomers. Their correct configurations are:

Last Answer : The complex ion . `[M(en)Br_(2)I_(2)]^(-1)`, has two optical isomers. Their correct configurations are: A. B. C. D.

The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively

Description : The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively

Last Answer : The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively A. R, R B. S, S C. R, S D. S, R

The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively

Description : The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively

Last Answer : The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively A. R, R B. S, S C. R, S D. S, R

What Are The Structures Of Sheet-fed Press Or What Are The Configurations Of Sheet-fed Offset Press?

Description : What Are The Structures Of Sheet-fed Press Or What Are The Configurations Of Sheet-fed Offset Press?

Last Answer : Sheet-fed offset printing is a method in which individual pages of paper are fed into the machine. This printing method is popular for small and medium-sized fixed jobs such as limited-edition books.

Why open loop OP-AMP configurations are not used in linear applications?

Description : Why open loop OP-AMP configurations are not used in linear applications?

Last Answer : The open loop gain of the op-amp is not a constant and it varies with changing the temperature and variations in power supply.Also the bandwidth of the open loop op-amp is negligibly small.For this reasons open loop OP-AMP configurations are not used in linear applications.

The Provision and Management of a controlled library containing all the configurations items is called as a) Configuration Control b) Status Accounting c) Configuration Identification d) Configuration Identification

Description : The Provision and Management of a controlled library containing all the configurations items is called as a) Configuration Control b) Status Accounting c) Configuration Identification d) Configuration Identification

Last Answer : The provision and management of a controlled library containing all the configuration items is called Configuration Management. Configuration Management is the process of identifying, organizing, and ... Verification and Audit (ensuring that the configuration items are complete and accurate).

List the different transistor configurations.

Description : List the different transistor configurations.

Last Answer : The three different transistor configurations are, 1. Common emitter configuration(CE) 2. Common base configuration(CB) 3. Common collector configuration(CC)

Explain various Robot configurations with neat sketch.

Description : Explain various Robot configurations with neat sketch. 

Last Answer : Different Robot Configurations: Robots are being classified on the basis of their physical configuration and control systems adopted. These classifications are briefly described as below: [1] ... direction for vertical insertion tasks. It is basically used for the assembly purpose.

Explain various configurations with sketches

Description : Explain various configurations with sketches

Last Answer : Robot Configurations 1) Rectangular Configuration:- This uses three perpendicular slides to construct the x, y, z axes. By moving three slides relative to one another, the robot is capable of ... , which provides a substantial rigidity in the vertical direction for many essential tasks.  

Which of the given configurations of Palki (Pallanquin) will work the best for the traveller as well as for the labourers carrying the traveller?

Description : Which of the given configurations of Palki (Pallanquin) will work the best for the traveller as well as for the labourers carrying the traveller?

Last Answer : C

Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Description : Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Last Answer : Configuration - Common Emitter Common Collector Common Base

List configurations of BJT.

Description : List configurations of BJT. 

Last Answer : Configurations of BJT : 1) Common Base (CB) configuration 2) Common Emitter (CE) configuration 3) Common Collector (CC) configuration

Transistor operating configurations

Description : Transistor operating configurations

Last Answer : Transistor operating configurations

The 555 timer can be used in which of the following configurations ?

Description : The 555 timer can be used in which of the following configurations ?  a) astable, monostable b) monostable, bistable c) astable, toggled d) bistable, tristable

Last Answer : The 555 timer can be used in astable, monostable configurations.

A three-phase, induction-type motor experiences an open in one phase. Which of the listed automatic protective devices will prevent the machine from being damaged? A. Overspeed trip B. Thermal overload relay C. Three-pole safety switch D. Magnetic blowout coil

Description : A three-phase, induction-type motor experiences an open in one phase. Which of the listed automatic protective devices will prevent the machine from being damaged? A. Overspeed trip B. Thermal overload relay C. Three-pole safety switch D. Magnetic blowout coil

Last Answer : Answer: B

They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser). ∙ A. Theodore Maiman ∙ B. KC Kao and GA Bockham ∙ C. Charles Townes and Arthur Schawlow ∙ D. Kapron, Keck and Maurer

Description : They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser). ∙ A. Theodore Maiman ∙ B. KC Kao and GA Bockham ∙ C. Charles Townes and Arthur Schawlow ∙ D. Kapron, Keck and Maurer

Last Answer : C. Charles Townes and Arthur Schawlow

They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser).

Description : They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser).

Last Answer : Charles Townes and Arthur Schawlow

Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Description : Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Last Answer : South pole at the right, north pole at the left.

A compass is located at the geographical North Pole. In which direction would its needle point?

Description : A compass is located at the geographical North Pole. In which direction would its needle point?

Last Answer : To the magnetic north pole.

What advantage is gained by using pole pieces with curved faces in the D’Arsonval meter movement?

Description : What advantage is gained by using pole pieces with curved faces in the D’Arsonval meter movement?

Last Answer : Two-position and three-position.

Salient-pole rotors may be used in alternators driven by what types of prime movers?

Description : Salient-pole rotors may be used in alternators driven by what types of prime movers?

Last Answer : Internal combustion engines, water force and electric motors

Why are shaded-pole motors used to drive only very small devices?

Description : Why are shaded-pole motors used to drive only very small devices?

Last Answer : They have very weak starting torques.

Is It Possible To Hook Up More Than One Compressor To A Single Pressure Switch?

Description : Is It Possible To Hook Up More Than One Compressor To A Single Pressure Switch?

Last Answer : Yes, it is possible to use one pressure switch on more than one compressor. You should always run a relay if you want to hook up multiple compressors to a single switch. You should check the amp draw on the switch first, and then you’ll know how many compressors you can hook up to one switch.

Is it possible to concede that those with political positions opposite your own might nevertheless be patriots?

Description : Is it possible to concede that those with political positions opposite your own might nevertheless be patriots?

Last Answer : I think they may have convinced themselves of that yes, and whatever the people pitch forking them money tell them to believe. Hey @stanleybmanly you don't have to suffer like us poor Canadians ,up here ... guys don't get media bombed by our election bullshit, just wish we were that lucky as well.

When a bar magnet is cut into two equal halves, the pole strength of each piece (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : (4) remains the same Explanation: The poles remains same whether the magnet is cut into two equal half or more and also pole strength remains same but magnetic moment reduces due to decrease in the length of ... is called north pole (N-poled of the magnet and the other end the south pole (S-pole).

When a bar magnet is cut into two equal halves, the pole strength of each piece – (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece – (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : remains the same

A 4-pole, 3-phase, double-layer winding is housed in a 36-slot stator for an ac machine with

Description : A 4-pole, 3-phase, double-layer winding is housed in a 36-slot stator for an ac machine with 60o phase spread. Coil span is 7 short pitches. Number of slots in which top and bottom layers belong to different phases is  (A) 24 (B) 18 (C) 12 (D) 0

Last Answer : A 4-pole, 3-phase, double-layer winding is housed in a 36-slot stator for an ac machine with 60o phase spread. Coil span is 7 short pitches. Number of slots in which top and bottom layers belong to different phases is 24 

Mechanical engineers: how should one think about using an electric motor actuator vs a hydraulic actuator powered by an electric pump?

Description : Mechanical engineers: how should one think about using an electric motor actuator vs a hydraulic actuator powered by an electric pump?

Last Answer : Too much wear on gears (and they would have to be huge), much more power advantage with hydraulics. Less parts. And more cost effective. And take up less space.

(Actuator) What is Actuator ?

Description : (Actuator) What is Actuator ?

Last Answer : An actuator is a type of motor that can be rotated automatically and controlled mechanically.

How do you change the actuator in a 2004 dodge ram 1500 truck 4wheel drive?

Description : How do you change the actuator in a 2004 dodge ram 1500 truck 4wheel drive?

Last Answer : What is the answer ?