What does a lighted LED indicate on a logic comparator?

What does a lighted LED indicate on a logic comparator?
by

1 Answer

Answer :

A difference in logic states between the reference IC and the IC  under test.
by

Related questions

A lighted LED on a logic clip represents what logic level?

Description : A lighted LED on a logic clip represents what logic level?

Last Answer : A "1" state.

The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B.

Description : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is  (A) 4 (B) 6 (C) 8 (D) 10

Last Answer : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is 6

The LED lamps of a typical logic probe are normally in what state?

Description : The LED lamps of a typical logic probe are normally in what state?

Last Answer : DIM.

What are the functions of a converter-comparator group?

Description : What are the functions of a converter-comparator group?

Last Answer : The comparator compares the signal strengths from the receivers and the converter converts the frequency-shift rf signal into a tty set dc loop control signal.

Can I also wrap a line of colored lights around a tree with lighted filaments?

Description : Can I also wrap a line of colored lights around a tree with lighted filaments?

Last Answer : I imagine it’d be fine unless you bring the whole thing in the bathtub with you.

I just high lighted my hair, going from dark brown to a golden almost blonde in some areas. What can I use to lighten my eyebrows just a tad?

Description : I just high lighted my hair, going from dark brown to a golden almost blonde in some areas. What can I use to lighten my eyebrows just a tad?

Last Answer : My girl is a hair stylist and she recommends NEVER lightening or tinting your brows. Reason being that it will be very noticeable if the tint isn’t right and your facial complexion and features will clash. :)

A lighted candle gets extinguished when covered with a tumbler. Why? -Do You Know?

Description : A lighted candle gets extinguished when covered with a tumbler. Why? -Do You Know?

Last Answer : answer:

Does a lighted mouse radiate?

Description : We have a new mouse at home on a PC that glows red and in the evening it lights up half the room. Can't the light from the mouse radiate something when used in the body?

Last Answer : I have been working on a PC for several years and my hands are working. And I have a damn very luminous rat.

In Fig. the circular cross-section of tunnel is shown. A 100 W almp is lighted at the heighest point S. The diameter of the tunnel is 2m. Compare the

Description : In Fig. the circular cross-section of tunnel is shown. A 100 W almp is lighted at the heighest point S. The diameter of the tunnel is 2m. Compare the

Last Answer : In Fig. the circular cross-section of tunnel is shown. A 100 W almp is lighted at the heighest point ... lowest point P and the point Q of the tunnel.

What is lighted on ********* day?

Description : What is lighted on Christmas day?

Last Answer : Need answer

Why can a log of wood not be lighted by a matchsticks but a paper can?

Description : Why can a log of wood not be lighted by a matchsticks but a paper can?

Last Answer : A bulky log of wood takes much longer to reach its flash point and to begin to burn, as the match can only heat a small area of the log at a time. By which time, the matchstick has either burnt ... log up to its flash point and it will start to burn. The kindling can be started by a single match.

Why the other bulb remains lighted when you unscrewed one of them in a parallel circuit?

Description : Why the other bulb remains lighted when you unscrewed one of them in a parallel circuit?

Last Answer : In a parallel circuit, in this case the electrons still have a complete circuit. For example, if it is a DC circuit, the electrons can still go from the negative terminal of a battery, pass through the bulb thatis not unscrewed, and continue to the positive terminal in the battery.

What can you say about the amount of lighted area from phases of the moon 1 to 5?

Description : What can you say about the amount of lighted area from phases of the moon 1 to 5?

Last Answer : New Moon, Waxing Crescent Moon, First Quarter Moon, WaxingGibbous Moon, Full Moon.

How many lighted candycanes will be needed to line a 16 foot driveway?

Description : How many lighted candycanes will be needed to line a 16 foot driveway?

Last Answer : I like to use one every two feet, so you will need 8.

Lighted Mirror?

Description : Lighted Mirror?

Last Answer : form_title= Lighted Mirror form_header= Kill 2 birds with one stone when you install a lighted mirror~ Do you want the mirror mounted?*= () Yes () No () Not Sure Where do you want the mirror?*= _ [50] What size do you want the mirror? *= _ [50]

Are lighted exit signs required to meet fire code standards?

Description : Are lighted exit signs required to meet fire code standards?

Last Answer : It is required by law to have exits properly illuminated. To ensure that each of your employees will be able to see the exit, in the case of a fire, be sure that you purchase a lighted exit sign at each exit.

Where would I get lighted ********* decorations?

Description : Where would I get lighted Christmas decorations?

Last Answer : During Christmas it is amazing what stores offer lighted Christmas decorations. One place that offers beautiful decorations is the Cracker Barrel Restaurant. They begin selling their Christmas items at the end of July and have beautiful decorations.

Why would someone use ********* outdoor lighted decorations for Halloween?

Description : Why would someone use Christmas outdoor lighted decorations for Halloween?

Last Answer : Sometimes people use Christmas outdoor lighted decorations for Halloween because they are versatile, like the white lights. However, it is quite tacky to use decorations like reindeer/Santas so I advise against that.

When using the test set-up shown in the illustration, the lighted lamp indicates the winding is ____________. EL-0027 A. grounded B. good C. open D. shorted

Description : When using the test set-up shown in the illustration, the lighted lamp indicates the winding is ____________. EL-0027 A. grounded B. good C. open D. shorted

Last Answer : Answer: A

During the start-up of the circuit shown in the illustration, it is noted that the ends of component 'C' remain lighted but the tube does not illuminate. The cause of this problem is ____________. EL-0081 A. component 'A' is open B. component 'D' is closed C. component 'C' is the wrong wattage D. component 'B' contacts are stuck closed

Description : During the start-up of the circuit shown in the illustration, it is noted that the ends of component 'C' remain lighted but the tube does not illuminate. The cause of this problem is ____________. EL- ... ' is closed C. component 'C' is the wrong wattage D. component 'B' contacts are stuck closed

Last Answer : Answer: D

You can see me from the earth but the lighted part of me that you see changes every day.

Description : You can see me from the earth but the lighted part of me that you see changes every day.

Last Answer : The moon.

A lighted candle gets extinguished when covered with a tumbler. Why?

Description : A lighted candle gets extinguished when covered with a tumbler. Why?

Last Answer : Because of inadequate supply of air

When a lighted matchstick is shown before another light source, the shadow of the matchstick is formed on a screen but not the shadow of the flame. Why is it so?

Description : When a lighted matchstick is shown before another light source, the shadow of the matchstick is formed on a screen but not the shadow of the flame. Why is it so?

Last Answer : A shadow is a lightless (dark) region formed beyond an opaque object in the direction opposite to the source of light. An opaque object that comes in the way of light prevents the light that is due ... cannot prevent the light from the other source too. Hence the shadow of the flame is not formed.

What causes a green plant exposed to the light, on only one side, to bend towards the source of light as it grows? (a) Light stimulates plant cells on the lighted side to grow faster. (b) Auxin accumulates on the shaded side, stimulating greater cell elongation there. (c) Green plants need light to perform photosynthesis. (d) Green plants seek light because they are phototropic.

Description : What causes a green plant exposed to the light, on only one side, to bend towards the source of light as it grows? (a) Light stimulates plant cells on the lighted side to grow ... Green plants need light to perform photosynthesis. (d) Green plants seek light because they are phototropic.

Last Answer : (b) Auxin accumulates on the shaded side, stimulating greater cell elongation there

Two candles of same height are lighted at the same time. The first is consumed in 6 hours and second in 4 hours. Assuming that each candles burns at a constant rate, in how many hours after being lighted, the ratio between the first and second candles becomes 2:1? a) 1 hour b) 2 hour c) 3 hour d) 4 hour e) None of these

Description : Two candles of same height are lighted at the same time. The first is consumed in 6 hours and second in 4 hours. Assuming that each candles burns at a constant rate, in how many hours after being lighted, the ratio between ... becomes 2:1? a) 1 hour b) 2 hour c) 3 hour d) 4 hour e) None of these

Last Answer : Answer: C Let height of both candles is ‘h’ and let after t times ratio between the height be 2:1 h – t*h/6 : h – t*h/4 = 2:1 t = 3

Two candles of same height are lighted at the same time. The first is consumed in 3 hours and second in 2 hours. Assuming that each candles burns at a constant rate, in how many hours after being lighted, the ratio between the first and second candles becomes 2:1? A) 2 hour B) 2.5 hour C) 4 hour D) 1.5 hour E) None of these

Description : Two candles of same height are lighted at the same time. The first is consumed in 3 hours and second in 2 hours. Assuming that each candles burns at a constant rate, in how many hours after being lighted, the ratio between the ... 2:1? A) 2 hour B) 2.5 hour C) 4 hour D) 1.5 hour E) None of these

Last Answer : Answer: D Height of both candles are same i.e. h First one takes 3 hours to burn completely, so in one hour = h/3 Similarly second one will burn in one hour = h/2 Let after t time, ratio between their height is 2:1 so, ... given 2:1, h - t*(h/3) / h - t*(h/2) = 2/1 Solving we get t = 1.5

What do the dotted lines connecting C1, C2, C5, and C6 indicate?

Description : What do the dotted lines connecting C1, C2, C5, and C6 indicate?

Last Answer : The dotted lines indicate that these capacitors are "ganged" and are tuned together with a single control.

What does the number "2" (before the letter "N") indicate in the JAN marking scheme?

Description : What does the number "2" (before the letter "N") indicate in the JAN marking scheme?

Last Answer : the number of junctions in the device, which in this case indicates a transistor.

Does 1:5 indicate a step-up or step-down transformer?

Description : Does 1:5 indicate a step-up or step-down transformer?

Last Answer : Step up.

Does 1:5 indicate a step-up or step-down transformer?

Description : Does 1:5 indicate a step-up or step-down transformer?

Last Answer : Step up

In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Description : In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Last Answer : . 80º.

In the add mode, what does the output of C2 indicate?

Description : In the add mode, what does the output of C2 indicate?

Last Answer : . MSD of the sum.

Does low ripple voltage indicate good or bad filtering?

Description : Does low ripple voltage indicate good or bad filtering?

Last Answer : Good.

What does the letter "N" indicate in the semiconductor identification system?

Description : What does the letter "N" indicate in the semiconductor identification system?

Last Answer : A semiconductor.

Does low ripple voltage indicate good or bad filtering?

Description : Does low ripple voltage indicate good or bad filtering?

Last Answer : Good.

What does each generation of computer systems indicate?

Description : What does each generation of computer systems indicate?

Last Answer : Significant change in computer design.

What does the wattage rating of a resistor indicate?

Description : What does the wattage rating of a resistor indicate?

Last Answer : Its ability to dissipate heat

While measuring frequency response, as the signal generator approaches the lowest and highest frequency the recorder can effectively record, the VTVM reading drops to less than - 3 dB. What does this indicate?

Description : While measuring frequency response, as the signal generator approaches the lowest and highest frequency the recorder can effectively record, the VTVM reading drops to less than - 3 dB. What does this indicate?

Last Answer : The upper and lower limits of the frequency response specification for that tape recorder.

What does the color red indicate on a tty patch panel?

Description : What does the color red indicate on a tty patch panel?

Last Answer : It handles classified information.

In applying Kirchhoff’s current law, what does the polarity of the current indicate?

Description : In applying Kirchhoff’s current law, what does the polarity of the current indicate?

Last Answer : Whether the current is entering the junction (+) or leaving the junction (-).

Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Description : Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Last Answer : The internal (source) resistance of the battery will drop some of the voltage

You have just checked a 1/500-ampere fuse with an ohmmeter and find it is open. Checking the replacement fuse shows the replacement fuse is open also. Why would the replacement fuse indicate open?

Description : You have just checked a 1/500-ampere fuse with an ohmmeter and find it is open. Checking the replacement fuse shows the replacement fuse is open also. Why would the replacement fuse indicate open?

Last Answer : The ohmmeter causes more than 1/500 ampere through the fuse when you check the fuse, thus it opens the fuse.

What does the voltage rating of a fuse indicate?

Description : What does the voltage rating of a fuse indicate?

Last Answer : The ability of the fuse to quickly extinguish the arc after the fuse element melts and the maximum voltage that cannot jump across the gap of the fuse after the fuse opens.

What does the current rating of a fuse indicate?

Description : What does the current rating of a fuse indicate?

Last Answer : The amount of current the fuse will allow without opening.

If the insulation of a conductor was being measured in figure1-51 (A), would the reading indicate a good insulation?

Description : If the insulation of a conductor was being measured in figure1-51 (A), would the reading indicate a good insulation?

Last Answer : Yes.

In a galvanometer, what two methods are used to indicate the amount of coil rotation?

Description : In a galvanometer, what two methods are used to indicate the amount of coil rotation?

Last Answer : The pointer arrangement and the light and mirror arrangement.

In a galvanometer, what two methods are used to indicate the amount of coil rotation?

Description : In a galvanometer, what two methods are used to indicate the amount of coil rotation?

Last Answer : he pointer arrangement and the light and mirror arrangement.

What does the term single phase indicate?

Description : What does the term single phase indicate?

Last Answer : One voltage (one output).

What happens to a comparator when both inputs are equal?

Description : What happens to a comparator when both inputs are equal?

Last Answer : What you're talking about here is an op-amp configured in open loop mode - no feedback resistor, so the output swings + or -, generally in opposition to the higher value on the inputs. ... are completely equal, because of thermal variations, quantum effect, and other non-ideal aspects of a circuit.

What is a comparator ?

Description : What is a comparator ?

Last Answer : A comparator is a type of circuit that compares signal or voltage levels.