The LED lamps of a typical logic probe are normally in what state?

The LED lamps of a typical logic probe are normally in what  state?
by

1 Answer

Answer :

DIM.
by

Related questions

What is the purpose of a logic probe?

Description : What is the purpose of a logic probe?

Last Answer : They provide you with a visual indication of the logic state at any point you choose in the circuit.

When compared to incandescent lamps, what is the power requirement of an LED?

Description : When compared to incandescent lamps, what is the power requirement of an LED?

Last Answer : Very low.

What does a lighted LED indicate on a logic comparator?

Description : What does a lighted LED indicate on a logic comparator?

Last Answer : A difference in logic states between the reference IC and the IC under test.

A lighted LED on a logic clip represents what logic level?

Description : A lighted LED on a logic clip represents what logic level?

Last Answer : A "1" state.

Labeling is voluntary on a) Solid State inverters c) LED retrofit lamps b)Diesel Generator d) all of above.

Description : Labeling is voluntary on a) Solid State inverters c) LED retrofit lamps b)Diesel Generator d) all of above.

Last Answer : ALL OF ABOVE

in a directional coupler that is designed to sample the incident energy, what happens to the two portions of the wavefront when they arrive at the pickup probe?

Description : in a directional coupler that is designed to sample the incident energy, what happens to the two portions of the wavefront when they arrive at the pickup probe?

Last Answer : The wavefront portions add.

What determines the frequency, bandwidth, and power handling capability of a waveguide probe?

Description : What determines the frequency, bandwidth, and power handling capability of a waveguide probe?

Last Answer : Size and shape

What is the primary advantage of using a current probe?

Description : What is the primary advantage of using a current probe?

Last Answer : Current probes enable you to perform current measurements without disconnecting wires. Current probes are clamped around the insulated wire.

The ground detection system, shown in the illustration for a low-voltage, threephase system has a ground in line 'A'. Therefore, lamp 'A' will burn ____________. EL-0009 A. dimly or be out, and lamps 'B' and 'C' will burn brightly B. normally, and lamps 'B' and 'C' will burn dimly or be out C. brightly, and lamps 'B' and 'C' will burn dimly or be out D. brightly, and lamps 'B' and 'C' will burn normally

Description : The ground detection system, shown in the illustration for a low-voltage, threephase system has a ground in line 'A'. Therefore, lamp 'A' will burn ____________. EL-0009 A. dimly or be out, and lamps 'B' and ... and 'C' will burn dimly or be out D. brightly, and lamps 'B' and 'C' will burn normally

Last Answer : Answer: A

A three-phase electrical system is equipped with ground detecting lamps. If one of the lamp goes dark and the other two burn normally before and after the test switch is operated, this indicates _______________. A. the dark lamp must be replaced B. there is a ground in the line with the dark lamp C. there are grounds in two of the three phases D. the voltage to the dark lamp is less than that of the system

Description : A three-phase electrical system is equipped with ground detecting lamps. If one of the lamp goes dark and the other two burn normally before and after the test switch is operated, this indicates _______________. ... of the three phases D. the voltage to the dark lamp is less than that of the system

Last Answer : Answer: A

Can I use an incandescent dimmer with LED lamps?

Description : Can I use an incandescent dimmer with LED lamps?

Last Answer : answer:The answer is . It depends. Some of the newer LED bulbs can be used with dimmers. They have circuits specifically designed to sense the reduced voltage and convert it to a pulse width modulated signal at the ... try it. If it does not work there I am sure you can find another place to put it.

Recommendations for LED nail lamps.

Description : Hey, I want to try switching from classic UV lamps to LED lamps, because I get a lot of recommendations that it will last a little longer for LED gel. But as an ignorant person in the field of ... not like some low-quality, but not extremely expensive. I will be happy for any response - Thanks;)

Last Answer : When I was looking for it I came across www.uvlampynanehty.cz at the beginning it solves the difference there, but I think UV is better overall

What are the advantages of LED lamps?

Description : What are the advantages of LED lamps?

Last Answer : What are the advantages of LED lamps? LED lamps have an advantage over fluorescent lamps in the first place in terms of environmental friendliness. Another reason for using LED lamps is ... advantages. Today, such lamps are used in everyday life, for industrial lighting and street lighting.

In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Description : In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Last Answer : All inputs must be low.

What must be the logic state of R and S to produce the TRUE output?

Description : What must be the logic state of R and S to produce the TRUE output?

Last Answer : Both must be 1s (HIGH) at the same time.

An Arithmetic Logic Unit (ALU) normally contains a number of multiplexer circuits. How many of these might you expect to find in an ALU in a modern CPU chip, and what is their purpose?

Description : An Arithmetic Logic Unit (ALU) normally contains a number of multiplexer circuits. How many of these might you expect to find in an ALU in a modern CPU chip, and what is their purpose?

Last Answer : answer:FYI, We don’t do homework here. Hint: Realize that an ALU needs to be fed instructions (opcodes) and that they will need to be decoded. This question is also somewhat dated.

Computers normally solve problem by breaking them down into a series of yes-or-no decisions represented by 1s and 0s. What is the name of the logic that allows computers to assign numerical values that fail somewhere between 0 and 1? a) Human logic b) Fuzzy logic c) Boolean logic d) Operational logic

Description : Computers normally solve problem by breaking them down into a series of yes-or-no decisions represented by 1s and 0s. What is the name of the logic that allows computers to assign numerical values that fail ... 0 and 1? a) Human logic b) Fuzzy logic c) Boolean logic d) Operational logic

Last Answer : b) Fuzzy logic

A typical demand curve will normally have a (a) positive slope ; (b) horizontal slope ;(c) vertical slope ; (d) negative slope

Description : A typical demand curve will normally have a (a) positive slope ; (b) horizontal slope ;(c) vertical slope ; (d) negative slope

Last Answer : (d) negative slope 

What type of logic family uses diodes in the input?

Description : What type of logic family uses diodes in the input?

Last Answer : DTL (diode transistor logic).

A, what logic element enables FF3 to toggle with the clock?

Description : A, what logic element enables FF3 to toggle with the clock?

Last Answer : The AND gate

What logic levels must exist for the FF to be toggled by the clock?

Description : What logic levels must exist for the FF to be toggled by the clock?

Last Answer : Both J and K must be HIGH.

What type of logic gates are added to a parallel adder to enable it to subtract?

Description : What type of logic gates are added to a parallel adder to enable it to subtract?

Last Answer : X-OR gates.

A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Description : A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Last Answer : . One or the other of the inputs must be HIGH, but not both at the same time.

How do we refer to errors caused by faulty logic and coding mistakes?

Description : How do we refer to errors caused by faulty logic and coding mistakes?

Last Answer : Bugs.

How many logic gates could be contained in lsi?

Description : How many logic gates could be contained in lsi?

Last Answer : 1,000 to 2,000.

. In the arithmetic/logic section, data is returned to what section after processing?

Description : . In the arithmetic/logic section, data is returned to what section after processing?

Last Answer : Internal storage.

What capability allows the arithmetic/logic section to test various conditions encountered during processing and take action based on the result?

Description : What capability allows the arithmetic/logic section to test various conditions encountered during processing and take action based on the result?

Last Answer : Logic.

What is the equivalent logic gate of a two-input NAND gate with both inputs inverted?

Description : What is the equivalent logic gate of a two-input NAND gate with both inputs inverted?

Last Answer : OR gate.

A NAND gate has inputs labeled as A, B, and C. If A and B are HIGH, C must be at what logic level to produce a HIGH output?

Description : A NAND gate has inputs labeled as A, B, and C. If A and B are HIGH, C must be at what logic level to produce a HIGH output?

Last Answer : . Low.

A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW? A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW?

Description : A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW?

Last Answer : HIGH.

If logic 1 = -5 vdc and logic 0 = 0 vdc, what logic polarity is being used?

Description : If logic 1 = -5 vdc and logic 0 = 0 vdc, what logic polarity is being used?

Last Answer : Negative.

If logic 1 = +2 vdc and logic 0 = -2 vdc, what logic polarity is being used?

Description : If logic 1 = +2 vdc and logic 0 = -2 vdc, what logic polarity is being used?

Last Answer : Positive.

If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Description : If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Last Answer : Positive.

If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Description : If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Last Answer : Positive.

With regard to computer logic circuits, what is meant by "complement?"

Description : With regard to computer logic circuits, what is meant by "complement?"

Last Answer : The opposite of the original statement.

Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.

What are the two logic states of an IC?

Description : What are the two logic states of an IC?

Last Answer : A "1" or "0."

What is a typical light-to-dark resistance ratio for a photocell?

Description : What is a typical light-to-dark resistance ratio for a photocell?

Last Answer : 1:1000.

What the three basic components make up the typical magnetic amplifier?

Description : What the three basic components make up the typical magnetic amplifier?

Last Answer : Two saturable reactors and a transformer.

In a typical velocity servo block diagram what device is placed in the feedback loop that is not present in the position servo?

Description : In a typical velocity servo block diagram what device is placed in the feedback loop that is not present in the position servo?

Last Answer : Tachometer.

A typical liquid-cooling system is composed of what loops?

Description : A typical liquid-cooling system is composed of what loops?

Last Answer : Primary and secondary.

What is the typical frequency range about the center frequency of a tunable magnetron?

Description : What is the typical frequency range about the center frequency of a tunable magnetron?

Last Answer : . ±5 percent.

What is the typical frequency range about the center frequency of a tunable magnetron?

Description : What is the typical frequency range about the center frequency of a tunable magnetron?

Last Answer : ±5 percent.

What is the typical back-to-forward resistance ratio of a good-quality diode?

Description : What is the typical back-to-forward resistance ratio of a good-quality diode?

Last Answer : 10-to-1 ratio.

A typical satellite communications operational link consists of a satellite and what two other components?

Description : A typical satellite communications operational link consists of a satellite and what two other components?

Last Answer : Earth terminals.

Name the three main sections of a typical rf signal generator.

Description : Name the three main sections of a typical rf signal generator.

Last Answer : Oscillator circuit, modulator, and output control circuit.

What are the two major sections of a typical AM transmitter?

Description : What are the two major sections of a typical AM transmitter?

Last Answer : Rf and af units.

A ___________________ monitor looks like a television and are normally used with non-portable computer systems. a) CRT b) LCD c) LED d) Flat Panel Monitors

Description : A ___________________ monitor looks like a television and are normally used with non-portable computer systems. a) CRT b) LCD c) LED d) Flat Panel Monitors

Last Answer : Answer: a Explanation: A CRT (or the Cathode Ray Tube) Monitor looks like a television ideally. The flat panel monitors are thinner and lighter in comparison

Where is the rattail joint normally used?

Description : Where is the rattail joint normally used?

Last Answer : When wires are in conduit and a junction box is used.

List three items of information normally included in the general description section of a specification sheet for a transistor.

Description : List three items of information normally included in the general description section of a specification sheet for a transistor.

Last Answer : The kind of transistor, the transistor's common applications, and mechanical data