What is the simplest form of fm detector?

What is the simplest form of fm detector?
by

1 Answer

Answer :

Slope detector.
by

Related questions

What is the function of an fm detector?

Description : What is the function of an fm detector?

Last Answer : Converting frequency variations of received fm signals to amplitude variations

In its simplest form, what functions must a radar detector be capable of performing?

Description : In its simplest form, what functions must a radar detector be capable of performing?

Last Answer : Detecting the presence of rf energy.

What does the simplest diode detector use to reproduce the modulating frequency?

Description : What does the simplest diode detector use to reproduce the modulating frequency?

Last Answer : The modulation envelope.

A particular circuit that rids FM of noise A. Detector B. Discriminator C. Phase Shifter D. Limiter

Description : A particular circuit that rids FM of noise A. Detector B. Discriminator C. Phase Shifter D. Limiter

Last Answer : D. Limiter

What are the different types of FM detector?

Description : What are the different types of FM detector?

Last Answer : The different types of FM Detectors are: 1. Simple Slope Detector 2. Balanced Slope Detector 3. Ratio Detector 4. Phase Discriminator 5. FM Detector using Phase Locked Loop (PLL) 

List the types of FM detector. Explain any one of them.

Description : List the types of FM detector. Explain any one of them.

Last Answer : Types of FM detector:- 1. Simple slope detector 2. Balanced slope detector 3. Phase discriminator(Foster seely discriminator) 4. Ratio detector 5. PLL detector Simple ... . If the IF amplitude is sufficiently limited prior to reaching the PLL and the loop is properly compensated 

Draw and label PLL based FM detector.

Description : Draw and label PLL based FM detector.

Last Answer : Draw and label PLL based FM detector.

What type of objects are most easily detected by an fm system?

Description : What type of objects are most easily detected by an fm system?

Last Answer : Stationary.

What factor determines the difference between the transmitted frequency and the received frequency in an fm transmitter?

Description : What factor determines the difference between the transmitted frequency and the received frequency in an fm transmitter?

Last Answer : Travel time.

What is the major difference between direct reproduce electronics and FM reproduce electronics?

Description : What is the major difference between direct reproduce electronics and FM reproduce electronics?

Last Answer : FM record electronics must use a limiter and demodulator circuit (figure 5-5) to demodulate the signal intelligence from the carrier frequency.

The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Description : The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Last Answer : It amplifies the frequency-modulated output from the record oscillator and sends it to the record head.

How do FM record electronics differ from AM (direct record) electronics?

Description : How do FM record electronics differ from AM (direct record) electronics?

Last Answer : Instead of recording the signal just as it appears at the recorder’s input, FM record electronics records a frequency-modulated carrier signal from a record oscillator (figure 5-4) onto the magnetic tape

What happens to an fm signal as you increase the frequency of the modulating signal?

Description : What happens to an fm signal as you increase the frequency of the modulating signal?

Last Answer : Both the bandwidth and the number of significant sidebands increase.

What is the major disadvantage of an fm signal as compared to an AM signal?

Description : What is the major disadvantage of an fm signal as compared to an AM signal?

Last Answer : Wide bandpass.

In an fm transmitter, when does an oscillator generate only a steady frequency?

Description : In an fm transmitter, when does an oscillator generate only a steady frequency?

Last Answer : When no modulation is present.

Why can phase-modulated signals be detected by fm detectors?

Description : Why can phase-modulated signals be detected by fm detectors?

Last Answer : Because of the incidental frequency shift that is caused while phase-shifting a carrier wave that is similar to fm modulation.

What characteristic of a varactor is used in an fm modulator?

Description : What characteristic of a varactor is used in an fm modulator?

Last Answer : Capacitance.

What two values may be used to determine the bandwidth of an fm wave?

Description : What two values may be used to determine the bandwidth of an fm wave?

Last Answer : The number of significant sidebands and the modulating frequency.

How is the degree of modulation expressed in an fm system?

Description : How is the degree of modulation expressed in an fm system?

Last Answer : As the ratio of the frequency deviation to the maximum frequency deviation allowable.

Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Description : Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Last Answer : An amplifier.

In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Description : In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Last Answer : (a) Phase. (b) Amplitude.

An error signal is the difference between what two quantities fed to the CT (error detector)?

Description : An error signal is the difference between what two quantities fed to the CT (error detector)?

Last Answer : Input signal and feedback.

Why is detector saturation not generally a problem in fiber optic communications systems?

Description : Why is detector saturation not generally a problem in fiber optic communications systems?

Last Answer : Because fiber optic communications systems operate at low optical power levels.

What are the four most common materials used in semiconductor detector fabrication?

Description : What are the four most common materials used in semiconductor detector fabrication?

Last Answer : Silicon, gallium arsenide, germanium, and indium phosphide.

For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Description : For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Last Answer : High.

Describe the operation of an optical detector

Description : Describe the operation of an optical detector

Last Answer : It is a transducer that converts an optical signal into an electrical signal. It does this by generating an electrical current proportional to the intensity of incident optical radiation.

What is the function of the detector?

Description : What is the function of the detector?

Last Answer : To extract the modulating audio signal.

How can a peak detector for pam be modified to detect pdm?

Description : How can a peak detector for pam be modified to detect pdm?

Last Answer : By making the time constant for charging the capacitor at least 10 times the maximum received pulse width.

What is the time constant of the resistor and capacitor in a peak detector for pam?

Description : What is the time constant of the resistor and capacitor in a peak detector for pam?

Last Answer : At least 10 times the interpulse period.

What characteristic of a pulse does a peak detector sample?

Description : What characteristic of a pulse does a peak detector sample?

Last Answer : Pulse amplitude or pulse duration

How is a quadrature detector changed when used for phase demodulation?

Description : How is a quadrature detector changed when used for phase demodulation?

Last Answer : The quadrature grid signal is excited by a reference from the transmitter.

Name two advantages of the gated-beam detector.

Description : Name two advantages of the gated-beam detector.

Last Answer : Extreme simplicity, few components, and ease of adjustment.

What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Description : What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Last Answer : Both grids must be positively biased

What circuit functions does the tube in a gated-beam detector serve?

Description : What circuit functions does the tube in a gated-beam detector serve?

Last Answer : Limits, detects, and amplifies.

What is the primary advantage of a ratio detector?

Description : What is the primary advantage of a ratio detector?

Last Answer : Suppresses amplitude noise without limiter stages.

which components act as the filter network in the diode detector?

Description : which components act as the filter network in the diode detector?

Last Answer : C1 and R1.

To what circuit arrangement is a common-base detector equivalent?

Description : To what circuit arrangement is a common-base detector equivalent?

Last Answer : A diode detector followed by a stage of audio amplification.

Which junction acts as the detector in a common-base detector?

Description : Which junction acts as the detector in a common-base detector?

Last Answer : Emitter-base junction.

How is the output signal developed in the common-emitter detector?

Description : How is the output signal developed in the common-emitter detector?

Last Answer : By the collector current flow through R4.

Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Description : Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Last Answer : Emitter-base junction

Under what circuit conditions would the shunt detector be used?

Description : Under what circuit conditions would the shunt detector be used?

Last Answer : When the input voltage variations are too small to give a usable output from a series detector.

How does the current-diode detector differ from the voltage-diode detector?

Description : How does the current-diode detector differ from the voltage-diode detector?

Last Answer : The current-diode detector is in parallel with the input and load.

What is the function of the diode in a series-diode detector?

Description : What is the function of the diode in a series-diode detector?

Last Answer : Rectifies the rf pulses in the received signal.

What three functions does the transistor in a regenerative detector serve?

Description : What three functions does the transistor in a regenerative detector serve?

Last Answer : Oscillator, mixer, and detector.

What simple, one-transistor detector circuit uses the heterodyne principle?

Description : What simple, one-transistor detector circuit uses the heterodyne principle?

Last Answer : Regenerative detector.

To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Description : To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Last Answer : Load.

What is the simplest type of clock circuit?

Description : What is the simplest type of clock circuit?

Last Answer : An astable or free-running multivibrator.

What is the name of the simplest type of rectifier which uses one diode?

Description : What is the name of the simplest type of rectifier which uses one diode?

Last Answer : The half-wave rectifier.

Which types of operating systems are the simplest and most common on microcomputers?

Description : Which types of operating systems are the simplest and most common on microcomputers?

Last Answer : Single user/single tasking.

What is the simplest type of scanning?

Description : What is the simplest type of scanning?

Last Answer : Single lobe.