How is a quadrature detector changed when used for phase demodulation?

How is a quadrature detector changed when used for  phase demodulation?
by

1 Answer

Answer :

The quadrature grid signal is excited by a reference from the  transmitter.
by

Related questions

What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Description : What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Last Answer : Both grids must be positively biased

Explain the demodulation of AM signal using diode detector.

Description : Explain the demodulation of AM signal using diode detector.

Last Answer : Simple diode detector:- Explanation:- This is essentially just a half wave rectifier which charges a capacitor to a voltage nearly to the peak voltage of the incoming AM waveform s(t). ... detector output is proportional to the signal strength. Stronger Am signal higher is the dc AGC voltage.

A constellation diagram shows us the __________ of a signal element, particularly when we areusing twocarriers (one in-phase and one quadrature). A) amplitudeand phase B) amplitudeand frequency C) frequencyand phase D) none of the above

Description : A constellation diagram shows us the __________ of a signal element, particularly when we areusing twocarriers (one in-phase and one quadrature). A) amplitudeand phase B) amplitudeand frequency C) frequencyand phase D) none of the above

Last Answer : amplitudeand phase

In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be?

Last Answer : In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be out of phase by 90°.

How is conversion used in pulse demodulation?

Description : How is conversion used in pulse demodulation?

Last Answer : Ppm, pfm, and pcm are converted to either pdm or pam for demodulation.

What is demodulation?

Description : What is demodulation?

Last Answer : The process of recovering intelligence from a modulated carrier.

A quadrature signaling have ________ possible states. A. 16 B. 8 C. 32 D. 4

Description : A quadrature signaling have ________ possible states. A. 16 B. 8 C. 32 D. 4

Last Answer : D. 4

What is quadrature quantity?

Description : What is quadrature quantity?

Last Answer : When the phase angle between two vectors is 90° electrical, then they are said to be quadrature quantity.

Quadrature amplitude modulation(QAM) isa combination of ___________. A) ASK and FSK B) ASK and PSK C) PSK and FSK D) none of the above

Description : Quadrature amplitude modulation(QAM) isa combination of ___________. A) ASK and FSK B) ASK and PSK C) PSK and FSK D) none of the above

Last Answer : ASK and PSK

Time synchronization is necessary in (A) FDM. (B) TDM. (C) WDM. (D) Quadrature multiplexing

Description : Time synchronization is necessary in (A) FDM. (B) TDM. (C) WDM. (D) Quadrature multiplexing

Last Answer : (B) TDM.

The purpose of the series quadrature windings in an Amplidyne -

Description : The purpose of the series quadrature windings in an Amplidyne -  a) Neutralize the effect of Armature Reaction b) Reduce commutation difficulties c) Increase the gain d) Increase the response time

Last Answer : The purpose of the series quadrature windings in an Amplidyne - Increase the gain 

Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Description : Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Last Answer : An amplifier.

In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Description : In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Last Answer : (a) Phase. (b) Amplitude.

An error signal is the difference between what two quantities fed to the CT (error detector)?

Description : An error signal is the difference between what two quantities fed to the CT (error detector)?

Last Answer : Input signal and feedback.

Why is detector saturation not generally a problem in fiber optic communications systems?

Description : Why is detector saturation not generally a problem in fiber optic communications systems?

Last Answer : Because fiber optic communications systems operate at low optical power levels.

What are the four most common materials used in semiconductor detector fabrication?

Description : What are the four most common materials used in semiconductor detector fabrication?

Last Answer : Silicon, gallium arsenide, germanium, and indium phosphide.

For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Description : For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Last Answer : High.

Describe the operation of an optical detector

Description : Describe the operation of an optical detector

Last Answer : It is a transducer that converts an optical signal into an electrical signal. It does this by generating an electrical current proportional to the intensity of incident optical radiation.

What is the function of the detector?

Description : What is the function of the detector?

Last Answer : To extract the modulating audio signal.

How can a peak detector for pam be modified to detect pdm?

Description : How can a peak detector for pam be modified to detect pdm?

Last Answer : By making the time constant for charging the capacitor at least 10 times the maximum received pulse width.

What is the time constant of the resistor and capacitor in a peak detector for pam?

Description : What is the time constant of the resistor and capacitor in a peak detector for pam?

Last Answer : At least 10 times the interpulse period.

What characteristic of a pulse does a peak detector sample?

Description : What characteristic of a pulse does a peak detector sample?

Last Answer : Pulse amplitude or pulse duration

In its simplest form, what functions must a radar detector be capable of performing?

Description : In its simplest form, what functions must a radar detector be capable of performing?

Last Answer : Detecting the presence of rf energy.

Name two advantages of the gated-beam detector.

Description : Name two advantages of the gated-beam detector.

Last Answer : Extreme simplicity, few components, and ease of adjustment.

What circuit functions does the tube in a gated-beam detector serve?

Description : What circuit functions does the tube in a gated-beam detector serve?

Last Answer : Limits, detects, and amplifies.

What is the primary advantage of a ratio detector?

Description : What is the primary advantage of a ratio detector?

Last Answer : Suppresses amplitude noise without limiter stages.

What is the function of an fm detector?

Description : What is the function of an fm detector?

Last Answer : Converting frequency variations of received fm signals to amplitude variations

What is the simplest form of fm detector?

Description : What is the simplest form of fm detector?

Last Answer : Slope detector.

which components act as the filter network in the diode detector?

Description : which components act as the filter network in the diode detector?

Last Answer : C1 and R1.

To what circuit arrangement is a common-base detector equivalent?

Description : To what circuit arrangement is a common-base detector equivalent?

Last Answer : A diode detector followed by a stage of audio amplification.

Which junction acts as the detector in a common-base detector?

Description : Which junction acts as the detector in a common-base detector?

Last Answer : Emitter-base junction.

How is the output signal developed in the common-emitter detector?

Description : How is the output signal developed in the common-emitter detector?

Last Answer : By the collector current flow through R4.

Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Description : Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Last Answer : Emitter-base junction

Under what circuit conditions would the shunt detector be used?

Description : Under what circuit conditions would the shunt detector be used?

Last Answer : When the input voltage variations are too small to give a usable output from a series detector.

How does the current-diode detector differ from the voltage-diode detector?

Description : How does the current-diode detector differ from the voltage-diode detector?

Last Answer : The current-diode detector is in parallel with the input and load.

What is the function of the diode in a series-diode detector?

Description : What is the function of the diode in a series-diode detector?

Last Answer : Rectifies the rf pulses in the received signal.

What does the simplest diode detector use to reproduce the modulating frequency?

Description : What does the simplest diode detector use to reproduce the modulating frequency?

Last Answer : The modulation envelope.

What three functions does the transistor in a regenerative detector serve?

Description : What three functions does the transistor in a regenerative detector serve?

Last Answer : Oscillator, mixer, and detector.

What simple, one-transistor detector circuit uses the heterodyne principle?

Description : What simple, one-transistor detector circuit uses the heterodyne principle?

Last Answer : Regenerative detector.

To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Description : To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Last Answer : Load.

How often do the batteries need changed in a smoke detector?

Description : How often do the batteries need changed in a smoke detector?

Last Answer : Batteries in a smoke detector should be checked for safety reasons monthly and for those same safty reasons they should be replaced annually! You should change the batteries in a smoke detector at ... with the seasons, as you change your clock back or forward, change your smoke detector batteries.

Modulation and demodulation is performed by (a) Microwave (b) Satellite (c) Modem -Technology

Description : Modulation and demodulation is performed by (a) Microwave (b) Satellite (c) Modem -Technology

Last Answer : (c) Modem converts digital signals to analog signals or analog signals to digital signals for the purpose of transmitting data over telephone lines or vice-versa.

Modulation or demodulation alone cannot be an effective method- Explain ?

Description : Modulation or demodulation alone cannot be an effective method- Explain ?

Last Answer : The process of converting digital signal to analog signal is called modulation and demodulation. Data communication is the combined result of both modulation and demodulation process. In order to facilitate ... the received signal are done by using modem at both the sender and the receiver.

Write the types of modulation and demodulation ?

Description : Write the types of modulation and demodulation ?

Last Answer : There are three main types of modulation. Namely: (a) Amplitude modulation: The modulation in which the amplitude of the carrier signal changes according to the modulating frequency is called ... the carrier signal changes according to the modulating frequency is called phase modulation.

What is modulation and demodulation ?

Description : What is modulation and demodulation ?

Last Answer : Modulation: The method by which audio frequency is mixed with high frequency is called modulation. Demdulation: The method by which the original modulating signal is separated is called demodulation. That is, it separates the audio frequency from the high-frequency.

What is Demodulation ?

Description : What is Demodulation ?

Last Answer : The method by which the original modulating signal is separated is called demodulation. That is, it separates the audio frequency from the high-frequency.

What is demodulation ?

Description : What is demodulation ?

Last Answer : Digitalization of analog signal is called demodulation.

The receive GCE system in an earth station performs what function(s)? A. Modulation and multiplexing B. Up conversion C. Demodulation and demultiplexing D. Down conversion

Description : The receive GCE system in an earth station performs what function(s)? A. Modulation and multiplexing B. Up conversion C. Demodulation and demultiplexing D. Down conversion

Last Answer : C. Demodulation and demultiplexing

A form of single sideband emission where the degree of carrier suppression enable the carrier to be reconstituted and be used for demodulation. A. Half carrier single sideband emission B. Full carrier single sideband emission C. Reduced carrier single sideband emissionD. Double sideband emission

Description : A form of single sideband emission where the degree of carrier suppression enable the carrier to be reconstituted and be used for demodulation. A. Half carrier single sideband emission B. Full carrier single sideband emission C. Reduced carrier single sideband emission D. Double sideband emission

Last Answer : C. Reduced carrier single sideband emission

A single sideband emission in which the degree of carrier suppression enables the carrier to be reconstituted and to be used for demodulation. A. Reduce carrier single sideband emission B. Half carrier single sideband emission C. Full carrier single sideband emission D. Standard single sideband emission

Description : A single sideband emission in which the degree of carrier suppression enables the carrier to be reconstituted and to be used for demodulation. A. Reduce carrier single sideband emission ... single sideband emission C. Full carrier single sideband emission D. Standard single sideband emission

Last Answer : A. Reduce carrier single sideband emission