Should I just keep bleeding the car coolant system or get the gasket fixed?

1 Answer

Answer :

I am by no means or stretch of the imagination an auto mechanic, but it does seem to me that running the water pump dry for any length of time is going to be damaging to it. Isn’t the water pump self-lubricating from the water that is pumped? Even if the time between you noticing the problem and you correcting the problem are short, they’re cumulative. I’d get that gasket looked into – and maybe consider replacing the water pump at the same time for good measure.

Related questions

Description : Where can I buy a dashboard skin for a car?

Last Answer : Try the junkyard. Otherwise it is probably one of those dealer only type of parts.

Description : How can I verify that a motor mount from my car is broken?

Last Answer : answer:The motor mount has a rubber bushing that is compressed by the weight of the engine when in service. The damage might not be evident without the normal stress on the part. An X-ray ... or broken, you might have noticed more vibration than usual, or felt a slight clunk when accelerating.

Description : Why is changing a timing belt such an expensive repair?

Last Answer : back in the day it was due mostly to the amount of labor required as opposed to cost of the parts. times may have changed though

Description : I'm not sure if my head gasket it blown but will adding sealant just to make sure hurt it in anyway?

Last Answer : Check the radiator; make sure that’s working. Check oil and antifreeze levels. Make sure there are no leaks. Check fans.

Description : Car has leaking head gasket? More info wanted?

Last Answer : Here are instructions on how to seal leaking head gaskets with sealant products.

Description : How do you fix a head gasket I'm a car?

Last Answer : your a car

Description : How does a refrigerator uses coolant to keep the food compartment cool?

Last Answer : Feel Free to Answer

Description : How can I be sure that my car's head gasket has blown?

Last Answer : A blown head gasket will cause the car to overheat easily, and coolant viscosity may increase. This may also indicate a leak in the cooling system, but a simple pressure test should be able to tell ... head gasket so it is best if you get an opinion from a trained mechanic before you do anything.

Description : change oil pan gasket in 1996 ford truck

Last Answer : Need Answer

Description : change valve cover gasket on nissan pickup

Last Answer : Need Answer

Description : Can i use a head gasket I bought for a 2.5L 4 cylinder be used on a 3.5L?

Last Answer : No - the bore for the cylinders are different

Description : How do you change oil pan gasket 1995 Chevy S-10 truck?

Last Answer : Need to know if it is the 4.3 or the 2.2 engine and if it is 2wheel drive or 4 wheel drive.

Description : How do you change oil pan gasket 1995 Chevy S-10 truck?

Last Answer : Need to know if it is the 4.3 or the 2.2 engine and if it is 2wheel drive or 4 wheel drive.

Description : Where online can I go to purchase a pressure cooker gasket?

Last Answer : Since there are many types of cookers, The Pressure Cooker Outlet has many varieties to choose from. Visit them at www.pressurecooker-outlet.com

Description : Is there any way to replace a pressure cooker gasket?

Last Answer : Yes, you can purchase pressure cooker gaskets online at the company's website. Most of them are fairly simple to replace.

Description : i have 1999 honda accord automatic trans leaking fluid but work perfect somebody told me you need gasket between trans and engine is that wrightif it is how much cost ?

Last Answer : Gaskets are critical to proper operation. If you lose to much fluid your transmission will overheat and it will ruin the transmission. Unless you have several thousands of dollars lying around, I ... but this is better than the thousands it would cost to replace or rebuild the entire transmission.

Description : How much does a blown head gasket cost to repair?

Last Answer : The approximate cost for a head gasket or engine repair may range from 700 to 900 dollars. This is a fairly costly repair. Most commercial auto repair shops do offer discounts for members and repair packages ... Jiffy Lube, AAA, Wal-Mart, Pep-Boys, and Costco for the best prices. Hope that helps!

Description : Repair Refrigerator Gasket?

Last Answer : Replacing your refrigerator gasket is good for the environment and your energy bills. It makes your refrigerator run more efficiently, and keeps your food fresher, longer! There are only a few ... steps you can save energy and food by improving the efficiency of this important kitchen appliance.

Description : What is the average price of a rubber gasket?

Last Answer : This will depend on what type of gasket you need and what it is for. I came up with .44 cents as an average starting price. www.gasketstogo.com

Description : Before working on an electric cargo winch master switch or controller, you should _____________. A. spray the gasket surface with a solvent B. drain condensate from the box C. open the circuit breaker in the power supply and tag D. heat the switch box to remove any moisture

Last Answer : Answer: C

Description : Which of the damages listed can occur to the components of a winch master control switch, if the cover gasket becomes deteriorated? A. Overheating of the winch motor. B. Contamination of lube oil. C. Sparking at the winch motor brushes. D. Rapid corrosion of switch components.

Last Answer : Answer: D

Description : What are the precautions to store the Gasket?  

Last Answer : a) Stress free storage b) No folding c) No reuse d) Replace with same thickness 

Description : What type of gasket and adhesive are used in transformer? 

Last Answer : Gasket – Neoprene based rubberised cork type RC70-C. (IS4253) Adhesive –Dunlop adhesive S-758 These are recommended by TELK 

Description : What Is Gasket? Where It Is Used?

Last Answer : It is sealing member between two flanges. Uses: 1. Water Line, Gas Line, Air Line used CAF Gasket. 2. RTJ - High Pressure Line. 3. Chemical Line - Rubber Gasket and Teflon Gasket. 4. ... Metallic, Metallic and Graphite. 5. Impregnated Gasket - Valve Sealing Gasket. 6. Spiral Wound - Steam Line.

Description : What is he required surface finish for raised or flat faced gasket surfaces? a) 63 µ in. b) 125 µ in-250 µ in. c) 250 µ in-400 µ in. d) 400-500 µ in.

Last Answer : b) 125 µ in-250 µ in.

Description : What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Last Answer : b) 125 µ in

Description : When a raised face flange gasket surface is machined to a flat face surface, does the flange still comply with ASME B31.3? a) No. b) Yes. c) Yes, provided the flange meets thickness requirements for flat faced flanges per ASME B31.3. d) Yes, if approached by the flange committee.

Last Answer : c) Yes, provided the flange meets thickness requirements for flat faced flanges per ASME B31.3.

Description : A flanged joint is composed of all but which of the following? a) The flange b) The bolts. c) The assembly method d) The gasket.

Last Answer : b) The bolts

Description : How to Change a Refrigerator Gasket

Last Answer : How to Change a Refrigerator Gasket If your refrigerator isn't cooling properly, it must be because the gasket is not intact enough. Over time, a refrigerator gasket can become damaged, and when it does, it's ... . If it does, you're in luck, but if not, have the appliance checked by a professional.

Description : How to Change a Refrigerator Gasket ?

Last Answer : How to Change a Refrigerator Gasket If your refrigerator isn't cooling properly, it must be because the gasket is not intact enough. Over time, a refrigerator gasket can become damaged, and when it does, it's ... . If it does, you're in luck, but if not, have the appliance checked by a professional.

Description : State any four requirements of gasket

Last Answer : Requirement of Gasket: Gaskets are used to provide a tight fitting joint between two surfaces. For example, the joint between cylinder head and block. 1. Conformity: - The gaskets must be able ... Provision of apertures: - The gasket must have apertures for any studs, bolts, opening etc.

Description : Flushing coolant in car. Help me decide please?

Last Answer : answer:If your coolant still has it's green color, and your car isn't over heating, I don't know that I would bother flushing it right now. Especially with the possible issues involving the ... head gasket leak theory. Though it could also be symptomatic of another issue with your coolant system.

Description : Regarding car coolant: is it a big deal to mix (add new on top of old), since I don't know what brand/type of coolant was last put in the car?

Last Answer : answer:I thought pretty much all of them are polyethylene glycol. Follow the manual for sure, but in general coolant is coolant.

Description : Calling all car gurus...Where oh where has my coolant gone?

Last Answer : It actually can evaporate with out a trace that is obvious. I'm sure your mech checked your oil to see if it's leaking there. It can leak ever so slightly into a cylinder through a cracked block and ... he pressure tested the system? After the car has warmed up do you see any vapor in the exhaust?

Description : I have a new car, I'm a beginner, so I don't want to neglect anything. Thank you for the advice.

Last Answer : If it doesn't boil, it won't evaporate, then for several years. It is advisable to always measure or have the quality of the coolant measured before the winter. Over time, the liquid loses its ... the liquid. If you have a new car, the mechanic should check the fluid level at each inspection.

Description : What happens if you put neat coolant in your car?

Last Answer : What is the answer ?

Description : Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : ANSWER: A

Description : Why is used as coolant in the radiator of a car engine?

Last Answer : Because it has high specific heat

Description : Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : B. Water has very high specific heat capacity (Answer)

Description : How can I keep my old fashioned bleeding heart alive all summer?

Last Answer : No it does not. There are some that hang on for a while , but alas, most dissappear to return the next year. I love them too! You could plant something like a fern next to it to fill the space visually???

Description : How coolant flow is maintained in the event of loss of power to the PHT system?

Last Answer : When the PHT power fails, it takes two minutes for DG to come to full power. The circulation is maintained by flywheel, which increases the de-acceleration and maintains the flow for two minutes. If ... which more denser cold water comes down and less denser hot water goes up by convection method. 

Description : What coolant do I use for 2006 Camry 16 valve?

Last Answer : Do you still have the Owner’s Manual? That should say…

Description : My coolant/temperature light has been continuously flashing on my Chev, even though my coolant reservoir is full; what gives?

Last Answer : Bad thermostat.

Description : Where do I dump coolant?

Last Answer : Check with local dealerships or service stations. Many accept fluids from DIYs, some states make dealers and service shops accept all hazardous vehicle fluids. If you didn’t get the work done with them they can charge a nominal fee.

Description : How do I create a contained coolant flow model for a school science project?

Last Answer : You need to find a way to build in a reservoir with an air inlet to allow air flow. A flask like container with a rubber cork you can get a a science surplus store for cheap. One tube goes ... and maybe even eliminate the need for an air inlet as it could expand and contract with the pump cycle.

Description : What's the range of cost likely to fix leaking coolant in a Saab?

Last Answer : No sign at all?

Description : Which is used as a coolant in nuclear reactors? -General Knowledge

Last Answer : The answer is 'Liquidsodium'

Description : Which is used as a coolant in nuclear reactors? -General Knowledge

Last Answer : answer:

Description : Which is used as a coolant in nuclear reactors? -General Knowledge

Last Answer : answer:

Description : What are the precautions to be taken while using coolant ?

Last Answer : : ( 1) The oil water ratio of soluble oil cutting fluid has to be checked from time to time and when water evaporates, the amount of water decreases. In such cases, the ratio of coolant ... job-material. (5) Cutting fluids used for ferrous metals should not be used in nonferrous metal machining.