What happens if you put neat coolant in your car?

What happens if you put neat coolant in your car?
by

1 Answer

Answer :

What is the answer ?
by

Related questions

Regarding car coolant: is it a big deal to mix (add new on top of old), since I don't know what brand/type of coolant was last put in the car?

Description : Regarding car coolant: is it a big deal to mix (add new on top of old), since I don't know what brand/type of coolant was last put in the car?

Last Answer : answer:I thought pretty much all of them are polyethylene glycol. Follow the manual for sure, but in general coolant is coolant.

Should I just keep bleeding the car coolant system or get the gasket fixed?

Description : Should I just keep bleeding the car coolant system or get the gasket fixed?

Last Answer : I am by no means or stretch of the imagination an auto mechanic, but it does seem to me that running the water pump dry for any length of time is going to be damaging to it. Isn't the ... get that gasket looked into - and maybe consider replacing the water pump at the same time for good measure.

Flushing coolant in car. Help me decide please?

Description : Flushing coolant in car. Help me decide please?

Last Answer : answer:If your coolant still has it's green color, and your car isn't over heating, I don't know that I would bother flushing it right now. Especially with the possible issues involving the ... head gasket leak theory. Though it could also be symptomatic of another issue with your coolant system.

Calling all car gurus...Where oh where has my coolant gone?

Description : Calling all car gurus...Where oh where has my coolant gone?

Last Answer : It actually can evaporate with out a trace that is obvious. I'm sure your mech checked your oil to see if it's leaking there. It can leak ever so slightly into a cylinder through a cracked block and ... he pressure tested the system? After the car has warmed up do you see any vapor in the exhaust?

Please, how long does the coolant in the car radiator last? I have a Peugeot 206 CC and it drives daily.

Description : I have a new car, I'm a beginner, so I don't want to neglect anything. Thank you for the advice.

Last Answer : If it doesn't boil, it won't evaporate, then for several years. It is advisable to always measure or have the quality of the coolant measured before the winter. Over time, the liquid loses its ... the liquid. If you have a new car, the mechanic should check the fluid level at each inspection.

Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : ANSWER: A

Why is used as coolant in the radiator of a car engine?

Description : Why is used as coolant in the radiator of a car engine?

Last Answer : Because it has high specific heat

Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : B. Water has very high specific heat capacity (Answer)

What coolant do I use for 2006 Camry 16 valve?

Description : What coolant do I use for 2006 Camry 16 valve?

Last Answer : Do you still have the Owner’s Manual? That should say…

My coolant/temperature light has been continuously flashing on my Chev, even though my coolant reservoir is full; what gives?

Description : My coolant/temperature light has been continuously flashing on my Chev, even though my coolant reservoir is full; what gives?

Last Answer : Bad thermostat.

Where do I dump coolant?

Description : Where do I dump coolant?

Last Answer : Check with local dealerships or service stations. Many accept fluids from DIYs, some states make dealers and service shops accept all hazardous vehicle fluids. If you didn’t get the work done with them they can charge a nominal fee.

How do I create a contained coolant flow model for a school science project?

Description : How do I create a contained coolant flow model for a school science project?

Last Answer : You need to find a way to build in a reservoir with an air inlet to allow air flow. A flask like container with a rubber cork you can get a a science surplus store for cheap. One tube goes ... and maybe even eliminate the need for an air inlet as it could expand and contract with the pump cycle.

What's the range of cost likely to fix leaking coolant in a Saab?

Description : What's the range of cost likely to fix leaking coolant in a Saab?

Last Answer : No sign at all?

Which is used as a coolant in nuclear reactors? -General Knowledge

Description : Which is used as a coolant in nuclear reactors? -General Knowledge

Last Answer : The answer is 'Liquidsodium'

Which is used as a coolant in nuclear reactors? -General Knowledge

Description : Which is used as a coolant in nuclear reactors? -General Knowledge

Last Answer : answer:

Which is used as a coolant in nuclear reactors? -General Knowledge

Description : Which is used as a coolant in nuclear reactors? -General Knowledge

Last Answer : answer:

What are the precautions to be taken while using coolant ?

Description : What are the precautions to be taken while using coolant ?

Last Answer : : ( 1) The oil water ratio of soluble oil cutting fluid has to be checked from time to time and when water evaporates, the amount of water decreases. In such cases, the ratio of coolant ... job-material. (5) Cutting fluids used for ferrous metals should not be used in nonferrous metal machining.

What is the difference between a coolant and a lubricant ?

Description : What is the difference between a coolant and a lubricant ?

Last Answer : Coolant It helps to reduce the heat generated by friction between the cutting tool and the work object. It just keeps the vitality of the cutting tool going. This prevents the cutting tool or ... or its parts from rust or corrosion. Rotation or simplification is facilitated between the two parts .

Antifreeze mixture in coolant

Description : Hello. We became so uncomfortable. The boy managed to pour the antifreeze mixture into the coolant. Its a big problem? Can you advise?

Last Answer : as a liquid in a coolant expansion tank?

In a air conditioner is thermal energy absorbed by coolant within pipes?

Description : In a air conditioner is thermal energy absorbed by coolant within pipes?

Last Answer : Need answer

Why is My Dodge Neon SXT coolant orange?

Description : Why is My Dodge Neon SXT coolant orange?

Last Answer : Because they use an orange colored coolant in it.

Where is the coolant temperature sending unit on a 1991 Chevy 4.3l?

Description : Where is the coolant temperature sending unit on a 1991 Chevy 4.3l?

Last Answer : There is two coolant temp sensors. One for the temp gauge thathas one wire to it located on the drivers side head between two ofthe three spark plugs. The second second temp sensor sendsinformation to the ECM and has two wires to it and is located nextto the thermostat housing.

What type of coolant does a 2007 Toyota yaris use?

Description : What type of coolant does a 2007 Toyota yaris use?

Last Answer : Feel Free to Answer

How does a refrigerator uses coolant to keep the food compartment cool?

Description : How does a refrigerator uses coolant to keep the food compartment cool?

Last Answer : Feel Free to Answer

What is the coolant capacity for a 65 Mustang 6cyl?

Description : What is the coolant capacity for a 65 Mustang 6cyl?

Last Answer : What is the answer ?

Is the thermostat replaced by the coolant bypass solenoid?

Description : Is the thermostat replaced by the coolant bypass solenoid?

Last Answer : Need answer

What Does the coolant bypass solenoid REPLACE the thermostat?

Description : What Does the coolant bypass solenoid REPLACE the thermostat?

Last Answer : Need answer

Flush the Coolant?

Description : Flush the Coolant?

Last Answer : form_title=Flush the Coolant form_header=Keep the cooling system running properly by regularly flushing and replacing the fluids. What type of coolant do you normally use?=_ How long as it been since the coolant has been flushed?=_ Have you had any overheating problems?=_

How much does it cost to get a coolant flush at Meineke?

Description : How much does it cost to get a coolant flush at Meineke?

Last Answer : A coolant flush at Meineke costs about 200.00. That is a very good price for a coolant flush. I highly recommend choosing Meineke as your primary go to for car problems.

What does a coolant flush cost?

Description : What does a coolant flush cost?

Last Answer : A coolant flush usually refers to changing the fluid in the radiator of your car and can mean having chemicals 'flushed' through the vehicle's cooling system so as to remove any unwanted rust or ... any event I would shop around to find a reputable mechanic who will give you the best price.

How much does a coolant flush cost?

Description : How much does a coolant flush cost?

Last Answer : call or check on line local garages and car dealerships to see who is offering the best deals and what all comes with it.if you know someone who can tell you if its the coolant leaking that would be ... is ahead of time and you will not have a service cost on top of the replacement of the coolant

How many quarts of coolant does a 2002 dodge intrepid 2.7l hold?

Description : How many quarts of coolant does a 2002 dodge intrepid 2.7l hold?

Last Answer : just buy 2 gallons of antifreeze, and two gallons of distilled water and make sure you use a 50/50 mixture. Cooling system holds 9.4 quarts. A drain of the system will not remove all the coolant. .

Which is used as a coolant in nuclear reactors?

Description : Which is used as a coolant in nuclear reactors?

Last Answer : – Liquid sodium

The _____________ sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Description : The _____________ sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Last Answer : Answer: a Explanation: The engine temperature sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting while the ... gas senor senses the amount of oxygen in the engine exhaust and calculates air-fuel ratio.

The knocking tendency in CI engines increases with (a) Increase of coolant water temperature (b) Increase of temperature of inlet air (c) Decrease of compression ratio (d) Increase of compression ratio

Description : The knocking tendency in CI engines increases with (a) Increase of coolant water temperature (b) Increase of temperature of inlet air (c) Decrease of compression ratio (d) Increase of compression ratio

Last Answer : Ans :c

Which of the following factors increases the tendency of knocking in the CI engines? (a) Increasing both the r and coolant temperatures (b) Increasing both the speed and the injection advance (c) Increasing the speed, injection advance and coolant temperature (d) Increasing the compression ratio

Description : Which of the following factors increases the tendency of knocking in the CI engines? (a) Increasing both the r and coolant temperatures (b) Increasing both the speed and the injection advance (c) Increasing the speed, injection advance and coolant temperature (d) Increasing the compression ratio

Last Answer : Ans :c

Consider the following statements: 1. Bordeaux mixture consists of sodium bromide and lime 2. Toothpastes contain calcium carbonate 3. Zinc amalgam is used in dental fillings 4. Liquid sodium is used as a coolant in nuclear reactors The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 2, 3 and 4 only (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Bordeaux mixture consists of sodium bromide and lime 2. Toothpastes contain calcium carbonate 3. Zinc amalgam is used in dental fillings 4. Liquid sodium is used as a coolant in nuclear reactors The ... 1, 3 and 4 only (c) 2, 3 and 4 only (d) 1, 2 and 3 only

Last Answer : Ans:(c)

Which of the following is used as a coolant in nuclear reactors? (1) Heavy water (2) Cadmium (3) Liquid sodium (4) Graphite

Description : Which of the following is used as a coolant in nuclear reactors? (1) Heavy water (2) Cadmium (3) Liquid sodium (4) Graphite

Last Answer : (3) Liquid sodium Explanation: Liquid metallic sodium may be used as the sole coolant, carrying heat from the core. Sodium has only one stable isotope, sodium-23. Sodium-23 is a very weak absorber of neutrons.

The commonly used coolant in refrigerators is – (1) Ammonia (2) Nitrogen (3) Freon (4) Oxygen

Description : The commonly used coolant in refrigerators is – (1) Ammonia (2) Nitrogen (3) Freon (4) Oxygen

Last Answer : (3) Freon Explanation: Modem refrigerators usually use a refrigerant called FIFC-134a (1,1,1,2- Tetrafluoroethane), which does not deplete the ozone layer, instead of Freon. Freon used to be the most common refrigerant till the 1980s; however, its use has declined since

In nuclear reactor, heavy water is used as – (1) coolant (2) fuel (3) moderator (4) atomic smasher

Description : In nuclear reactor, heavy water is used as – (1) coolant (2) fuel (3) moderator (4) atomic smasher

Last Answer : (3) moderator Explanation: Heavy water is used in certain types of nuclear reactors where it acts as a neutron moderator to slow down neutrons so that they are more likely to react with ... do not require uranium enrichment, heavy water reactors are of concern in regards to nuclear proliferation.

Which reactor uses primary coolant as fluoride salts of lithium, beryllium, thorium and uranium ?

Description : Which reactor uses primary coolant as fluoride salts of lithium, beryllium, thorium and uranium ?

Last Answer : Molten salt breeder reactor.

Which nuclear reactor uses water as a coolant, moderator and reflector ?

Description : Which nuclear reactor uses water as a coolant, moderator and reflector ?

Last Answer : Pressurised water reactor.

In which reactor the coolant and moderator are the same ? Pressurised water reactor.

Description : In which reactor the coolant and moderator are the same ? Pressurised water reactor.

Last Answer : Pressurised water reactor.

What is the function of coolant?

Description : What is the function of coolant?

Last Answer : Heat is absorbed by the coolant that is produced in the reactor. Typical coolants are water, carbon dioxide gas or liquid sodium.

Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Description : Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Last Answer : (A) N2

__________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Description : __________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Last Answer : (A) Nitrogen

Fast breeder reactors do not (A) Use Th-232 as fissile fuel (B) Convert fertile material to fissile material (C) Use fast neutrons for fission (D) Use molten sodium as coolant

Description : Fast breeder reactors do not (A) Use Th-232 as fissile fuel (B) Convert fertile material to fissile material (C) Use fast neutrons for fission (D) Use molten sodium as coolant

Last Answer : (A) Use Th-232 as fissile fuel

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damageB) Absorb the fast neutrons(C) Slow down the secondary neutrons(D) Protect the fuel element from coming in contact with the coolant

Description : Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damage B) Absorb the fast neutrons (C) Slow down the secondary neutrons (D) Protect the fuel element from coming in contact with the coolant

Last Answer : (A) Protect the walls of the reactor from radiation damage

Coolant used in a boiling water reactor is (A) Hydrogen gas (B) Water (C) Steam (D) A mixture of water & steam

Description : Coolant used in a boiling water reactor is (A) Hydrogen gas (B) Water (C) Steam (D) A mixture of water & steam

Last Answer : (D) A mixture of water & steam