What is the formula used to determine the gain of an amplifying device?

What is the formula used to determine the gain of an  amplifying device?
by

1 Answer

Answer :

Gain = output ÷ input.
by

Related questions

A control system with excessive noise, is likely to suffer from (a) saturation in amplifying stages (b) loss of gain (c) vibrations (d) oscillations

Description : A control system with excessive noise, is likely to suffer from (a) saturation in amplifying stages (b) loss of gain (c) vibrations (d) oscillations

Last Answer : Ans: A

The following is an amplifying device : (1) a transformer (2) a transistor (3) a diode (4) a resistor

Description : The following is an amplifying device : (1) a transformer (2) a transistor (3) a diode (4) a resistor

Last Answer : (2) a transistor Explanation: A transistor is a semiconductor device used to amplify or switch electronic signals and electrical power.

Which one among the following components is used as an amplifying device? (1) Transformer (2) Diode (3) Capacitor (4) Transistor

Description : Which one among the following components is used as an amplifying device? (1) Transformer (2) Diode (3) Capacitor (4) Transistor

Last Answer : (4) Transistor Explanation: An amplifier is an electronic device that increases the voltage, current, or power of a signal. Generally transistors are active devices that can be used with discrete components to amplify voltage, power or both depending upon the configuration.

Which one among the following components is used as an amplifying device? (1) Transformer (2) Diode (3) Capacitor (4) Transistor

Description : Which one among the following components is used as an amplifying device? (1) Transformer (2) Diode (3) Capacitor (4) Transistor

Last Answer : Transistor

What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

Description : What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

Last Answer : Spectrum analyzer.

Is the (exaggerated) pursuit of pleasure ironically amplifying misery?

Description : Is the (exaggerated) pursuit of pleasure ironically amplifying misery?

Last Answer : I do often think that more actually means less. What are we here for as Human Beings - just to aquire more goods and things? To find these things at the expense of having any real freedom? We ... we dont really need. Hypnotised by adverts who persuade us that buy, buy, buy will make us happy.

The radio snorts when amplifying the sound.

Description : The radio suddenly snores when it turns to sound control. It's pretty annoying. That probably won't stop again, will it? I have such a classic twin. I may add a photo. (not mine but that radio) :-)

Last Answer : Post your photo, I don't need to see the radio ...: D There is a dusty or damaged volume control button. The first case can be solved with a contact cleaner (eg Kontox) and pierced the brush. The second ... , it's not usually a problem). Of course - wouldn't it deserve to replace the whole radio? :O

Program for amplifying MP3 songs?

Description : Don't you know of a program that amplifies MP3 songs? I have a portable MP3 player, but it plays very quietly. So it occurred to me to amplify the songs. But that quality will go dill, huh?

Last Answer : MP3 is a lossy format (at the very size), so you can say to some extent that you don't know the difference in quality. Personally, I use Audacity to edit the sound, because it's ... tool that modifies the selected files based on the specified criteria. Or maybe you could just buy better headphones.

They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser). ∙ A. Theodore Maiman ∙ B. KC Kao and GA Bockham ∙ C. Charles Townes and Arthur Schawlow ∙ D. Kapron, Keck and Maurer

Description : They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser). ∙ A. Theodore Maiman ∙ B. KC Kao and GA Bockham ∙ C. Charles Townes and Arthur Schawlow ∙ D. Kapron, Keck and Maurer

Last Answer : C. Charles Townes and Arthur Schawlow

They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser).

Description : They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser).

Last Answer : Charles Townes and Arthur Schawlow

What two methods are used to compensate for the problems that cause low gain in an rf amplifier?

Description : What two methods are used to compensate for the problems that cause low gain in an rf amplifier?

Last Answer : . RF transformers are used and the transistor is neutralized.

If the output impedance of an amplifier circuit is decreased, what is the effect on the gain?

Description : If the output impedance of an amplifier circuit is decreased, what is the effect on the gain?

Last Answer : The gain decreases.

If the input-signal-developing impedance of an amplifier is increased, what is the effect on the gain?

Description : If the input-signal-developing impedance of an amplifier is increased, what is the effect on the gain?

Last Answer : The gain increases.

If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Description : If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Last Answer : A step-down transformer.

When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Description : When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Last Answer : Normal gain.

Which transistor configuration has a current gain of less than 1?

Description : Which transistor configuration has a current gain of less than 1?

Last Answer : Common base.

What is the current gain in a common-base circuit called?

Description : What is the current gain in a common-base circuit called?

Last Answer : Alpha (α).

If the unity-gain point of the operational amplifier used in question 24 is 500 kilohertz, what is the bandwidth of the circuit?

Description : If the unity-gain point of the operational amplifier used in question 24 is 500 kilohertz, what is the bandwidth of the circuit?

Last Answer : 50 kilohertz (Gain = 10; Gain-Bandwidth Product = 500,000) 500,000(Hz)

What happens to the overall gain of a lin-log amplifier as each stage saturates?

Description : What happens to the overall gain of a lin-log amplifier as each stage saturates?

Last Answer : Decreases.

How does ftc affect receiver gain, if at all?

Description : How does ftc affect receiver gain, if at all?

Last Answer : FTC has no effect on receiver gain

Immediately after the transmitter fires, stc reduces the receiver gain to what level?

Description : Immediately after the transmitter fires, stc reduces the receiver gain to what level?

Last Answer : Zero.

Which of the two types of automatic gain control, agc or iagc, is most effective in radar use for the Navy?

Description : Which of the two types of automatic gain control, agc or iagc, is most effective in radar use for the Navy?

Last Answer : IAGC.

The power gain of an antenna is directly related to what other antenna property?

Description : The power gain of an antenna is directly related to what other antenna property?

Last Answer : Directivity.

Why is a high-gain transistor used in the phase-shift oscillator?

Description : Why is a high-gain transistor used in the phase-shift oscillator?

Last Answer : Because of the losses encountered in the RC networks.

How can the gain of an APD be increased?

Description : How can the gain of an APD be increased?

Last Answer : By increasing the reverse-bias voltage

What limits the usefulness of high-gain, tunnel-diode frequency converters?

Description : What limits the usefulness of high-gain, tunnel-diode frequency converters?

Last Answer : Stability problems.

The plate voltage of a tube will vary 126 volts when a 3-volt ac signal is applied to the control grid. What is the gain of this tube?

Description : The plate voltage of a tube will vary 126 volts when a 3-volt ac signal is applied to the control grid. What is the gain of this tube?

Last Answer : 42.

What does manual gain control do to strong and weak signals, respectively?

Description : What does manual gain control do to strong and weak signals, respectively?

Last Answer : Attenuates the strong and amplifies the weak.

A point defect exhibiting an apparent gain in one direction will exhibit what, when measured in the opposite direction?

Description : A point defect exhibiting an apparent gain in one direction will exhibit what, when measured in the opposite direction?

Last Answer : An exaggerated loss.

Explain how a point defect may exhibit an apparent gain.

Description : Explain how a point defect may exhibit an apparent gain.

Last Answer : A point defect may exhibit apparent gain because the backscatter coefficient of the fiber present before the point defect is higher than that of the fiber present after.

What two variables determine the primary frequency of a resonant cavity?

Description : What two variables determine the primary frequency of a resonant cavity?

Last Answer : Size and shape of the cavity.

In an astable multivibrator, which components determine the pulse repetition frequency?

Description : In an astable multivibrator, which components determine the pulse repetition frequency?

Last Answer : RC coupling networks.

What two primary items determine the class of operation of an amplifier?

Description : What two primary items determine the class of operation of an amplifier?

Last Answer : The amount of bias and the amplitude of the input signal

. What three factors determine the amplitude of the voltage induced into a stator winding?

Description : . What three factors determine the amplitude of the voltage induced into a stator winding?

Last Answer : The amplitude of the primary voltage, the turns ratio, and the angular displacement between the rotor and the stator winding.

What three main factors determine the amount of refraction in the ionosphere?

Description : What three main factors determine the amount of refraction in the ionosphere?

Last Answer : (a) density of ionization of the layer (b) frequency (c) angle at which it enters the layer

You determine receiver sensitivity by measuring the power level of what signal?

Description : You determine receiver sensitivity by measuring the power level of what signal?

Last Answer : Minimum discernible signal (mds).

How does the operator of a single-lobe scanning system determine when the target moves off the lobe axis?

Description : How does the operator of a single-lobe scanning system determine when the target moves off the lobe axis?

Last Answer : The reflected signals decrease in strength.

. What are two of the three physical factors that determine the values of capacitance and inductance of a transmission line?

Description : . What are two of the three physical factors that determine the values of capacitance and inductance of a transmission line?

Last Answer : (1) Type of line used, (2) dielectric in the line, and (3) length of line.

What four fiber properties determine the number of modes propagating in a multimode gradedindex fiber?

Description : What four fiber properties determine the number of modes propagating in a multimode gradedindex fiber?

Last Answer : Numerical aperture (NA), relative refractive index difference ( D), profile parameter (α), and normalized frequency (V).

What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Description : What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Last Answer : a. Size of the headgap. b. Speed of the magnetic tape.

The way a magnetic head will be used determines how it is constructed. Name three factors that determine the final construction of a magnetic head.

Description : The way a magnetic head will be used determines how it is constructed. Name three factors that determine the final construction of a magnetic head.

Last Answer : a. Type of head (record, reproduce, or erase). b. Frequencies it will record or reproduce. c. Whether it will be used on a single or multitrack recorder.

What three components determine the address that locates where on a floppy disk the computer will store the data?

Description : What three components determine the address that locates where on a floppy disk the computer will store the data?

Last Answer : a. disk side number, b. track number, and c. sector number.

When using the tight-hand rule to determine precession, which finger indicates the direction of the applied force?

Description : When using the tight-hand rule to determine precession, which finger indicates the direction of the applied force?

Last Answer : Middle finger.

What factors determine the rigidity of a gyro?

Description : What factors determine the rigidity of a gyro?

Last Answer : Rotor speed, weight, shape.

What two analyses are performed to determine if a link design is viable?

Description : What two analyses are performed to determine if a link design is viable?

Last Answer : Power budget and risetime budget

When using an American Standard Wire Gauge to determine the size of a wire, where should you place the wire in the gauge to get the correct measurement?

Description : When using an American Standard Wire Gauge to determine the size of a wire, where should you place the wire in the gauge to get the correct measurement?

Last Answer : In the parallel walled slot not the circular area.

Using table 1-2, determine the resistance of 1,500 feet of AWG 20 wire at 25º C.

Description : Using table 1-2, determine the resistance of 1,500 feet of AWG 20 wire at 25º C.

Last Answer : 1,000 ft = 10.4 ohms1,500 ft = 1.5 × 0.4 = 15.6 ohms

What factors determine the direction of rotation in a dc motor?

Description : What factors determine the direction of rotation in a dc motor?

Last Answer : Direction of armature current, and direction of magnetic flux in field.

What rule should you use to determine the direction of induced emf in a coil?

Description : What rule should you use to determine the direction of induced emf in a coil?

Last Answer : The left-hand rule for generators.

What information must be known to determine the component values for a voltage divider?

Description : What information must be known to determine the component values for a voltage divider?

Last Answer : The source voltage and load requirements (voltage and current).