What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

What two specifications determine the maximum frequency  that a recorder's record and reproduce heads will be able to  transfer?
by

1 Answer

Answer :

a. Size of the headgap.  
 b. Speed of the magnetic tape.
by

Related questions

Why are record heads always placed before reproduce heads on recorders?

Description : Why are record heads always placed before reproduce heads on recorders?

Last Answer : Allow you to monitor the signals you're recording.

Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Description : Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Last Answer : 35-dB RMS because the highest SNR can always record and reproduce the widest range of input signals.

What two types of record and reproduce electronics are used by magnetic tape recorders?

Description : What two types of record and reproduce electronics are used by magnetic tape recorders?

Last Answer : . a. Direct record (AM). b. Frequency modulation (FM).

A recorder's erase head is always placed in what sequence on the record/reproduce track?

Description : A recorder's erase head is always placed in what sequence on the record/reproduce track?

Last Answer : . First, before the record and reproduce heads.

Most record and reproduce heads are in one of what three bandwidth categories?

Description : Most record and reproduce heads are in one of what three bandwidth categories?

Last Answer : a. Narrowband—100 Hz to 100 kHz. b. Intermediate band—100 Hz to 500 kHz. c. Wideband—400 Hz to 2 mHz.

The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Description : The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Last Answer : It generates an equalization signal which corrects any frequency response problems in the input signal from the pre-amplifier circuit.

How often should you demagnetize a recorder's magnetic heads?

Description : How often should you demagnetize a recorder's magnetic heads?

Last Answer : Every 8 to 25 hours depending on the manufacturer's recommendations.

What type of equipment should you use to demagnetize your recorder's magnetic heads?

Description : What type of equipment should you use to demagnetize your recorder's magnetic heads?

Last Answer : A hand-held degausser like the manual degaussers used for degaussing magnetic tape.

How should you clean your recorder's magnetic heads?

Description : How should you clean your recorder's magnetic heads?

Last Answer : With a cotton-tipped applicator soaked in either isopropyl alcohol or a head cleaner recommended by the recorder's manufacturer.

Magnetic tape recorders can have up to three different heads installed. What are the three functions performed by a recorder's heads?

Description : Magnetic tape recorders can have up to three different heads installed. What are the three functions performed by a recorder's heads?

Last Answer : Record, reproduce, and erase.

After using a tape that was stored in an area where temperatures exceeded 130º F you notice pieces of oxide sticking to the recorder's tape-transport mechanism, to its magnetic heads, and onto the tape. What is the probable cause of these symptoms?

Description : After using a tape that was stored in an area where temperatures exceeded 130º F you notice pieces of oxide sticking to the recorder's tape-transport mechanism, to its magnetic heads, and onto the tape. What is the probable cause of these symptoms?

Last Answer : Oxide shedding. At temperatures above 130º F, oxide coating becomes soft and sheds.

The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Description : The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Last Answer : It amplifies the frequency-modulated output from the record oscillator and sends it to the record head.

The head driver circuit in a tape recorder’s direct record electronics component (figure 5-1) performs what function?

Description : The head driver circuit in a tape recorder’s direct record electronics component (figure 5-1) performs what function?

Last Answer : It takes the signal from the summing network, amplifies it, and sends it to the record head for recording.

Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.

List four factors that can degrade the frequency response of magnetic tape recorders.

Description : List four factors that can degrade the frequency response of magnetic tape recorders.

Last Answer : a. A too-high or too-low bias signal level setting for the record head. b. An improper reproduce head gap. c. An improper tape transport speed. d. Poor tape-to-head contact.

What does the simplest diode detector use to reproduce the modulating frequency?

Description : What does the simplest diode detector use to reproduce the modulating frequency?

Last Answer : The modulation envelope.

What are two disadvantages of using a recorder’s erase head to erase data recorded on a magnetic tape?

Description : What are two disadvantages of using a recorder’s erase head to erase data recorded on a magnetic tape?

Last Answer : Using an erase head is slow, and it may not completely erase the tape.

What type of reeling system best controls a tape recorder's tape tension during starts and stops?

Description : What type of reeling system best controls a tape recorder's tape tension during starts and stops?

Last Answer : A tape buffering reeling system

What are the four basic parts of a magnetic tape recorder's tape transport system?

Description : What are the four basic parts of a magnetic tape recorder's tape transport system?

Last Answer : a. Tape reeling system. b. Tape speed control system. c. Electronic subsystem. d. Basic enclosure.

What causes flutter in a tape recorder’s output?

Description : What causes flutter in a tape recorder’s output?

Last Answer : Non-uniform tape motion caused by variations in tape speed.

What number harmonic is the primary harmonic distortion in magnetic tape recorders?

Description : What number harmonic is the primary harmonic distortion in magnetic tape recorders?

Last Answer : Third-order harmonic.

A recorder’s harmonic-distortion specification reads 2% third harmonic of a 100-kHz signal at 60 ips. What does this mean?

Description : A recorder’s harmonic-distortion specification reads 2% third harmonic of a 100-kHz signal at 60 ips. What does this mean?

Last Answer : The recorder has 2% third-harmonic distortion of a 100-kHz signal at 60 ips.

Technical manuals for tape recorders can state the SNR in what three different ways?

Description : Technical manuals for tape recorders can state the SNR in what three different ways?

Last Answer : a. Root-mean-square (RMS) signal-to-RMS noise. b. Peak-to-peak signal-to-RMS noise. c. Peak signal-to-RMS noise.

You plan to measure your tape recorder’s SNR. What test equipment will you need?

Description : You plan to measure your tape recorder’s SNR. What test equipment will you need?

Last Answer : A VTVM and a signal generator.

What method for erasing magnetic tape is much more effective and reliable than using a recorder’s erase head?

Description : What method for erasing magnetic tape is much more effective and reliable than using a recorder’s erase head?

Last Answer : Using a magnetic tape degausser

Digital magnetic tape recorders used to store and retrieve digital data fall into what three categories?

Description : Digital magnetic tape recorders used to store and retrieve digital data fall into what three categories?

Last Answer : a. Computer-compatible digital tape recorders. b. Telemetry digital tape recorders. c. Instrumentation digital tape recorders

Which single phase ac motor will you select for record players and tape recorders?

Description :  Which single phase ac motor will you select for record players and tape recorders?  a) Hysteresis motor b) Shaded pole motor c) Reluctance motor d) Two value capacitor motor

Last Answer : Which single phase ac motor will you select for record players and tape recorders?  Hysteresis motor

Which of the two types of magnetic tape is used to record audio and instrumentation type signals in the VLF to 2.5MHz frequency range?

Description : Which of the two types of magnetic tape is used to record audio and instrumentation type signals in the VLF to 2.5MHz frequency range?

Last Answer : Analog magnetic tape.

While measuring frequency response, as the signal generator approaches the lowest and highest frequency the recorder can effectively record, the VTVM reading drops to less than - 3 dB. What does this indicate?

Description : While measuring frequency response, as the signal generator approaches the lowest and highest frequency the recorder can effectively record, the VTVM reading drops to less than - 3 dB. What does this indicate?

Last Answer : The upper and lower limits of the frequency response specification for that tape recorder.

The vertical-deflection plates are used to reproduce what function?

Description : The vertical-deflection plates are used to reproduce what function?

Last Answer : Amplitude.

The vertical-deflection plates are used to reproduce what function?

Description : The vertical-deflection plates are used to reproduce what function?

Last Answer : Amplitude.

How should a tape recorder with good phase response reproduce a complex waveform, such as a square wave?

Description : How should a tape recorder with good phase response reproduce a complex waveform, such as a square wave?

Last Answer : With no distortion

What is the major difference between direct reproduce electronics and FM reproduce electronics?

Description : What is the major difference between direct reproduce electronics and FM reproduce electronics?

Last Answer : FM record electronics must use a limiter and demodulator circuit (figure 5-5) to demodulate the signal intelligence from the carrier frequency.

What two variables determine the primary frequency of a resonant cavity?

Description : What two variables determine the primary frequency of a resonant cavity?

Last Answer : Size and shape of the cavity.

What two factors determine the frequency of the output voltage of an alternator?

Description : What two factors determine the frequency of the output voltage of an alternator?

Last Answer : Speed of rotation and number of poles.

In an astable multivibrator, which components determine the pulse repetition frequency?

Description : In an astable multivibrator, which components determine the pulse repetition frequency?

Last Answer : RC coupling networks.

What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

Description : What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

Last Answer : Spectrum analyzer.

If love is a chemical reaction, I say if, will scientist ever be able to reproduce it?

Description : If love is a chemical reaction, I say if, will scientist ever be able to reproduce it?

Last Answer : answer:Sure. Dopamine (carbon, oxygen, nitrogen, hydrogen), oxytocin (same as the other one, with some sulfur), vasopressin (same as oxytocin). As for the price, I’m not sure I’d pay much for something that you can find in great abundance for free.

What Must every member particular species one kind of organism be able to reproduce in order for the species to surive?

Description : What Must every member particular species one kind of organism be able to reproduce in order for the species to surive?

Last Answer : Need answer

Which one of the following is incorrect about the characteristics of protobionts (coacervates and microspheres) as envisaged in the abiogenic origin of life? (a) They were partially isolated from the surroundings. (b) They could maintain an internal environment. (c) They were able to reproduce. (d) They could separate combinations of molecules from the surroundings.

Description : Which one of the following is incorrect about the characteristics of protobionts (coacervates and microspheres) as envisaged in the abiogenic origin of life? (a) They were partially isolated from ... were able to reproduce. (d) They could separate combinations of molecules from the surroundings.

Last Answer : (c) They were able to reproduce

. How do tape transports with differential velocity capstans maintain a constant tape tension in the area around the magnetic heads?

Description : . How do tape transports with differential velocity capstans maintain a constant tape tension in the area around the magnetic heads?

Last Answer : The supply capstan is slightly larger than the take-up capstan. This causes the take-up capstan to pull the tape slightly faster than the supply capstan feeds the tape.

What are four sources that can cause magnetic heads to become magnetized?

Description : What are four sources that can cause magnetic heads to become magnetized?

Last Answer : a. During ac power losses. b. During testing. c. Because of stray magnetic fields. d. From normal use.

In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.

What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Description : What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Last Answer : Actuator arm assembly.

The head arm assembly of a floppy disk drive transport has how many read heads and how many write heads?

Description : The head arm assembly of a floppy disk drive transport has how many read heads and how many write heads?

Last Answer : Two read heads and two write heads.

What are the three functions of the magnetic heads on a magnetic recording device?

Description : What are the three functions of the magnetic heads on a magnetic recording device?

Last Answer : a. Record the signal onto the recording medium. b. Reproduce the signal from the recording medium. c. Erase the signal from the recording medium.

List out the different frequency domain specifications?

Description : List out the different frequency domain specifications?

Last Answer : The frequency domain specifications are i) Resonant peak. ii) Resonant frequency.

What condition gives maximum power transfer from the source to the load?

Description : What condition gives maximum power transfer from the source to the load?

Last Answer : When the load resistance equals the source resistance.

What impedance relationship between the output of one circuit and the input of another circuit will provide the maximum power transfer?

Description : What impedance relationship between the output of one circuit and the input of another circuit will provide the maximum power transfer?

Last Answer : Equal impedance.

As per IS specifications, the maximum final setting time for ordinary Portland cement should be (A) 30 minutes (B) 1 hour (C) 6 hours (D) 10 hour

Description : As per IS specifications, the maximum final setting time for ordinary Portland cement should be (A) 30 minutes (B) 1 hour (C) 6 hours (D) 10 hour

Last Answer : Answer: Option D