Why are the ends of the wire clamped down after a Western Union splice is made?

Why are the ends of the wire clamped down after a Western  Union splice is made?
by

1 Answer

Answer :

To prevent damage to the tape insulation.
by

Related questions

Why should a synchro be rechecked for zero after it is clamped down?

Description : Why should a synchro be rechecked for zero after it is clamped down?

Last Answer : To ensure that it did not move off zero while it was being clamped.

Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Description : Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Last Answer : No, it is done automatically by the petroleum abrasive compound that comes in the terminal or splices.

What type of bias (positive or negative) is added to a negative damper for the most positive extremity of the wave shape to be clamped above 0 volts?

Description : What type of bias (positive or negative) is added to a negative damper for the most positive extremity of the wave shape to be clamped above 0 volts?

Last Answer : Positive bias.

Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Description : Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Last Answer : Spaghetti or heat-shrinkable tubing.

Which type of splice is used to splice a lighting fixture to a branch circuit?

Description : Which type of splice is used to splice a lighting fixture to a branch circuit?

Last Answer : Fixture joint.

What are the basic requirements for any splice or terminal connection?

Description : What are the basic requirements for any splice or terminal connection?

Last Answer : The connection must be both mechanically and electrically as strong as the conductor or device with which it is used

What fiber property directly affects splice loss in fusion splicing?

Description : What fiber property directly affects splice loss in fusion splicing?

Last Answer : The angles and quality of the two fiber-end faces.

The Navy recommends using the rotary splice for what two reasons?

Description : The Navy recommends using the rotary splice for what two reasons?

Last Answer : It is a low-loss mechanical splice that provides stable environmental and mechanical performance in the Navy environment, and it requires only a small amount of training.

Define a fiber optic splice.

Description : Define a fiber optic splice.

Last Answer : A permanent fiber joint whose purpose is to establish an optical connection between two individual optical fibers.

Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Description : Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Last Answer : Splice.

If you printed out a fake parking ticket, and clamped it under your wiper, so you could park for free, how likely is it for this ploy to succeed?

Description : If you printed out a fake parking ticket, and clamped it under your wiper, so you could park for free, how likely is it for this ploy to succeed?

Last Answer : Wow! Brilliant idea. Would only work during the shift change for the bylaw officer. They would remember who got what parking tickets.

Which of the following is not a function of washer? a) Distributes load over a large area of clamped parts b) Provides bearing surface over large clearance bolts c) Prevents marring of the bolt head and nut surface d) Helps in locking of the fastener

Description : Which of the following is not a function of washer? a) Distributes load over a large area of clamped parts b) Provides bearing surface over large clearance bolts c) Prevents marring of the bolt head and nut surface d) Helps in locking of the fastener

Last Answer : d) Helps in locking of the fastener

A bullet is fired with a muzzle velocity of 1000 meters per second from a rifle clamped to a window 4.9 meters above ground level. Neglecting air resistance, the horizontal distance from the rifle at which the bullet will strike the ground is w) 4.9 meters x) 500 meters y) 1000 meters z) 4900 meters

Description : A bullet is fired with a muzzle velocity of 1000 meters per second from a rifle clamped to a window 4.9 meters above ground level. Neglecting air resistance, the horizontal distance from the rifle at which the bullet will strike the ground is w) 4.9 meters x) 500 meters y) 1000 meters z) 4900 meters

Last Answer : ANSWER: Y -- 1000 METERS

Why are the ends of the deflection plates bent outward?

Description : Why are the ends of the deflection plates bent outward?

Last Answer : To permit wide-angle deflection of the bea

Why are the ends of the deflection plates bent outward?

Description : Why are the ends of the deflection plates bent outward?

Last Answer : To permit wide-angle deflection of the beam.

Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?

Description : Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?

Last Answer : Butt-jointed connectors.

What is a short discharge of electric current that prepares the fiber ends for fusion called?

Description : What is a short discharge of electric current that prepares the fiber ends for fusion called?

Last Answer : Prefusion

Why does the Navy only use the upper and lower ends of the mf band?

Description : Why does the Navy only use the upper and lower ends of the mf band?

Last Answer : Due to the commercial broadcast (AM) band.

If an installed optical fiber cable does not have connectors or terminations on both ends, how should the cable be tested?

Description : If an installed optical fiber cable does not have connectors or terminations on both ends, how should the cable be tested?

Last Answer : With an OTDR unless it is less than 50 meters in length. If it is less than 50 meters in length, continuity should be verified with a flashlight.

A straight wire of length 0.20 m moves at a steady speed of 3.0 m s-1 at right angles to the magnetic field of flux density 0.10 T. The e.m.f induced across ends of wire is A. 0.5 V B. 0.06 V C. 0.05 V D. 0.04 V

Description : A straight wire of length 0.20 m moves at a steady speed of 3.0 m s-1 at right angles to the magnetic field of flux density 0.10 T. The e.m.f induced across ends of wire is A. 0.5 V B. 0.06 V C. 0.05 V D. 0.04 V

Last Answer : 0.06 V

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span (A) 2.5 cm (B) 3.0 cm (C) 4.0 cm (D) 5.0 cm

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20  meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span  (A) 2.5 cm  (B) 3.0 cm  (C) 4.0 cm  (D) 5.0 cm 

Last Answer : (C) 4.0 cm

Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Description : Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Last Answer : a) 7

How much rail ends are cleaned with Kerosene Oil and steel wire brush? (i) Minimum 100 mm both side (ii) Minimum 50 mm both side.* (iii) No need (iv) As decided by site supervisor

Description : How much rail ends are cleaned with Kerosene Oil and steel wire brush? (i) Minimum 100 mm both side (ii) Minimum 50 mm both side.* (iii) No need (iv) As decided by site supervisor

Last Answer : (ii) Minimum 50 mm both side.*

When two ends of a circular uniform wire are joined to the terminals of a battery, the field at the center of the circle

Last Answer : When two ends of a circular uniform wire are joined to the terminals of a battery, the field at the center of the circle will depend on the radius of the circle.

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart...

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span?

Last Answer : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span 4.0 cm.

Why all the cut and splice jobs?

Description : Why all the cut and splice jobs?

Last Answer : answer:Do you have an example of a commercial you're talking about? Maybe we can post an example? Commercials have always tended to catch the viewer's eye/attention faster than the traditional programming. What ... in the same (hotel) room. CSI kind of shows, but I believe there are worse examples.

How to splice an s-video cable to an RCA (composite) cable?

Description : How to splice an s-video cable to an RCA (composite) cable?

Last Answer : Amazon (and many others, I’m sure) has plenty of cables that should do the trick.

Identify the problem in the following sentence:Tracy rides bulls in rodeos he’s really good. A. Fused sentence B. Comma splice C. Sentence fragment D. Dangling modifier?

Description : Identify the problem in the following sentence:Tracy rides bulls in rodeos he’s really good. A. Fused sentence B. Comma splice C. Sentence fragment D. Dangling modifier?

Last Answer : Do you know this answer yet?

Which of the. following sentences includes a comma splice?

Description : Which of the. following sentences includes a comma splice?

Last Answer : The bakery was closed, it was a Sunday.

A splice some contains all the following except (A) hnRNA (B) snRNAs (C) Some proteins (D) Ribosome

Description : A splice some contains all the following except (A) hnRNA (B) snRNAs (C) Some proteins (D) Ribosome

Last Answer : Answer : D

Splice sites are present in (A) Prokaryotic mRNA (B) Eukaryotic mRNA (C) Eukaryotic hnRNA (D) All of these

Description : Splice sites are present in (A) Prokaryotic mRNA (B) Eukaryotic mRNA (C) Eukaryotic hnRNA (D) All of these

Last Answer : Answer : C

The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps the turn before it C. apply the tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Description : The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps ... tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Last Answer : Answer: B

What is the average insertion loss of fusion splice in fiber optics? a. 0.09dB b. 0.9dB c. 0.19dB d. 0.009dB

Description : What is the average insertion loss of fusion splice in fiber optics? a. 0.09dB b. 0.9dB c. 0.19dB d. 0.009dB

Last Answer : a. 0.09dB

Steel bars are generally connected together to get greater length than the standard length by providing (A) Straight bar splice (B) Hooked splice (C) Dowel splice (D) All the above

Description : Steel bars are generally connected together to get greater length than the standard length by providing (A) Straight bar splice (B) Hooked splice (C) Dowel splice (D) All the above

Last Answer : Answer: Option D

Consider the following statements in respect of design of web and flange as splices: 1. Flange splice shall be designed for actual BM at the section. 2. Flange splice shall be designed to resist the actual shear at the section. 3. Web splice shall be designed to resist the actual shear at the section 4. Web splice shall be designed for actual BM. Which of these statements are correct? (a) 1 and 3 (b) 2 and 3 (c) 3 and 4 (d)1 and 4

Description : Consider the following statements in respect of design of web and flange as splices: 1. Flange splice shall be designed for actual BM at the section. 2. Flange splice shall be designed to resist the actual shear at the section. 3. Web ... are correct? (a) 1 and 3 (b) 2 and 3 (c) 3 and 4 (d)1 and 4

Last Answer : (a) 1 and 3

The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Description : The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Last Answer : D. situations in which cost of equipment is not a factor

When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Description : When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Last Answer : D. detector sensitivity

Used to test a fiber optics splice ∙ a. Spectrum analyzer ∙ b. Oscilloscope ∙ c. Optical power meter ∙ d. Field strength meter

Description : Used to test a fiber optics splice ∙ a. Spectrum analyzer ∙ b. Oscilloscope ∙ c. Optical power meter ∙ d. Field strength meter

Last Answer : c. Optical power meter

How much is the power loss of the fusion splice? ∙ a. 0.1 dB or less ∙ b. 0.01 dB or less ∙ c. 1 dB or less ∙ d. 10 dB or less

Description : How much is the power loss of the fusion splice? ∙ a. 0.1 dB or less ∙ b. 0.01 dB or less ∙ c. 1 dB or less ∙ d. 10 dB or less

Last Answer : a. 0.1 dB or less

The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Description : The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Last Answer : a. 0.1

What is the average loss in fiber splice? ∙ a. 0.10 dB ∙ b. 0.15 dB ∙ c. 0.20 dB ∙ d. 0.25 dB

Description : What is the average loss in fiber splice? ∙ a. 0.10 dB ∙ b. 0.15 dB ∙ c. 0.20 dB ∙ d. 0.25 dB

Last Answer : 0.15 dB

What is the average insertion loss of fusion splice in fiber optics? ∙ a. 0.09 dB ∙ b. 0.9 dB ∙ c. 0.19 dB ∙ d. 0.009 dB

Description : What is the average insertion loss of fusion splice in fiber optics? ∙ a. 0.09 dB ∙ b. 0.9 dB ∙ c. 0.19 dB ∙ d. 0.009 dB

Last Answer : ∙ b. 0.9 dB

The loss in single-mode fiber-optic cable due to a splice is about: a. 0.02 dB b. 0.2 dB c. 1 dB d. 3 dB

Description : The loss in single-mode fiber-optic cable due to a splice is about: a. 0.02 dB b. 0.2 dB c. 1 dB d. 3 dB

Last Answer : a. 0.02 dB

When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Description : When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Last Answer : d. Detector sensitivity

In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Description : In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Last Answer : c) all the rivets should be renewed.*

Draw the diagram of Fusion Splice and rigid alignment tube splice.

Description : Draw the diagram of Fusion Splice and rigid alignment tube splice. 

Last Answer : Different types of splicing are: 1. Fusion splicing or welding 2. Mechanical splicing 3. Elastic tube splicing FUSION SPLICING: A fiber join is a type of wield. The fiber ends ... figure below is a unique device that automatically performs lateral, longitudinal and angular alignment. 

I want to send money anonimously. Will Western Union reveal the sender's identity to the recipient?

Description : I want to send money anonimously. Will Western Union reveal the sender's identity to the recipient?

Last Answer : …what exactly are you trying to do?

Can you please help me with a Western Union Application I need to put a test question on it the receiver has no ID his wallet got stolen?

Description : Can you please help me with a Western Union Application I need to put a test question on it the receiver has no ID his wallet got stolen?

Last Answer : How do I put a test question on the application receiver has no ID his wallet was stolen

What's your experience with using Western Union?

Description : What's your experience with using Western Union?

Last Answer : Yes, and it's one of the money remittance commonly use around the world,especially Philippines. I have used once the Wester Union service over two years ago, and I find it that they really do the ... to use the system and you can send money using their website.It is for safety and security purposes.

How do you send money to Robert A Deyton Detention Facility though Western Union?

Description : How do you send money to Robert A Deyton Detention Facility though Western Union?

Last Answer : No