Which single phase ac motor will you select for record players and tape recorders?

 Which single phase ac motor will you select for record players and tape recorders? 

a) Hysteresis motor b) Shaded pole motor c) Reluctance motor d) Two value capacitor motor
by

1 Answer

Answer :

Which single phase ac motor will you select for record players and tape recorders? 


Hysteresis motor

by

Related questions

Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Description : Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Last Answer : 35-dB RMS because the highest SNR can always record and reproduce the widest range of input signals.

The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Description : The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Last Answer : It amplifies the frequency-modulated output from the record oscillator and sends it to the record head.

The head driver circuit in a tape recorder’s direct record electronics component (figure 5-1) performs what function?

Description : The head driver circuit in a tape recorder’s direct record electronics component (figure 5-1) performs what function?

Last Answer : It takes the signal from the summing network, amplifies it, and sends it to the record head for recording.

What two types of record and reproduce electronics are used by magnetic tape recorders?

Description : What two types of record and reproduce electronics are used by magnetic tape recorders?

Last Answer : . a. Direct record (AM). b. Frequency modulation (FM).

The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Description : The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Last Answer : It generates an equalization signal which corrects any frequency response problems in the input signal from the pre-amplifier circuit.

What type of reeling system best controls a tape recorder's tape tension during starts and stops?

Description : What type of reeling system best controls a tape recorder's tape tension during starts and stops?

Last Answer : A tape buffering reeling system

What are the four basic parts of a magnetic tape recorder's tape transport system?

Description : What are the four basic parts of a magnetic tape recorder's tape transport system?

Last Answer : a. Tape reeling system. b. Tape speed control system. c. Electronic subsystem. d. Basic enclosure.

What causes flutter in a tape recorder’s output?

Description : What causes flutter in a tape recorder’s output?

Last Answer : Non-uniform tape motion caused by variations in tape speed.

What number harmonic is the primary harmonic distortion in magnetic tape recorders?

Description : What number harmonic is the primary harmonic distortion in magnetic tape recorders?

Last Answer : Third-order harmonic.

List four factors that can degrade the frequency response of magnetic tape recorders.

Description : List four factors that can degrade the frequency response of magnetic tape recorders.

Last Answer : a. A too-high or too-low bias signal level setting for the record head. b. An improper reproduce head gap. c. An improper tape transport speed. d. Poor tape-to-head contact.

Technical manuals for tape recorders can state the SNR in what three different ways?

Description : Technical manuals for tape recorders can state the SNR in what three different ways?

Last Answer : a. Root-mean-square (RMS) signal-to-RMS noise. b. Peak-to-peak signal-to-RMS noise. c. Peak signal-to-RMS noise.

You plan to measure your tape recorder’s SNR. What test equipment will you need?

Description : You plan to measure your tape recorder’s SNR. What test equipment will you need?

Last Answer : A VTVM and a signal generator.

Magnetic tape recorders can have up to three different heads installed. What are the three functions performed by a recorder's heads?

Description : Magnetic tape recorders can have up to three different heads installed. What are the three functions performed by a recorder's heads?

Last Answer : Record, reproduce, and erase.

What method for erasing magnetic tape is much more effective and reliable than using a recorder’s erase head?

Description : What method for erasing magnetic tape is much more effective and reliable than using a recorder’s erase head?

Last Answer : Using a magnetic tape degausser

What are two disadvantages of using a recorder’s erase head to erase data recorded on a magnetic tape?

Description : What are two disadvantages of using a recorder’s erase head to erase data recorded on a magnetic tape?

Last Answer : Using an erase head is slow, and it may not completely erase the tape.

After using a tape that was stored in an area where temperatures exceeded 130º F you notice pieces of oxide sticking to the recorder's tape-transport mechanism, to its magnetic heads, and onto the tape. What is the probable cause of these symptoms?

Description : After using a tape that was stored in an area where temperatures exceeded 130º F you notice pieces of oxide sticking to the recorder's tape-transport mechanism, to its magnetic heads, and onto the tape. What is the probable cause of these symptoms?

Last Answer : Oxide shedding. At temperatures above 130º F, oxide coating becomes soft and sheds.

Digital magnetic tape recorders used to store and retrieve digital data fall into what three categories?

Description : Digital magnetic tape recorders used to store and retrieve digital data fall into what three categories?

Last Answer : a. Computer-compatible digital tape recorders. b. Telemetry digital tape recorders. c. Instrumentation digital tape recorders

Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.

A recorder's erase head is always placed in what sequence on the record/reproduce track?

Description : A recorder's erase head is always placed in what sequence on the record/reproduce track?

Last Answer : . First, before the record and reproduce heads.

Why are record heads always placed before reproduce heads on recorders?

Description : Why are record heads always placed before reproduce heads on recorders?

Last Answer : Allow you to monitor the signals you're recording.

What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Description : What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Last Answer : a. Size of the headgap. b. Speed of the magnetic tape.

Which type of AC single-phase motor will also operate on direct current? A. Split-phase B. Series-wound C. Shaded-pole D. Repulsion-start

Description : Which type of AC single-phase motor will also operate on direct current? A. Split-phase B. Series-wound C. Shaded-pole D. Repulsion-start

Last Answer : Answer: B

A stepper motor is (A) a dc motor. (B) a single-phase ac motor. (C) a multi-phase motor. (D) a two phase motor.

Description : A stepper motor is (A) a dc motor. (B) a single-phase ac motor. (C) a multi-phase motor. (D) a two phase motor.

Last Answer : Ans: D Stepper motor works on 1-phase-ON or 2-phase –ON modes of operation

Describe the construction and working principle of single phase AC motor.

Description : Describe the construction and working principle of single phase AC motor.

Last Answer : construction and working principle of single phase AC motor : Single phase induction motors have a phase distributed winding on the stator and a squirrel cage short-circuited winding on the rotor. ... is the basic working principle of induction motor of either type, single phase of 3 phase.

What Ten of the 50 digital video recorders (DVRs) in an inventory are known to be defective. What is the probability you randomly select an item that is not defective?

Description : What Ten of the 50 digital video recorders (DVRs) in an inventory are known to be defective. What is the probability you randomly select an item that is not defective?

Last Answer : It is 0.8

Which motor is generally used in Tap Recorders?

Description : Which motor is generally used in Tap Recorders? A) universal motor B) reluctance motor C) split phase motor D) hysteresis motor

Last Answer : Which motor is generally used in Tap Recorders? A) universal motor B) reluctance motor C) split phase motor D) hysteresis motor

A large dc motor is required to control the speed of the blower from a 3 -phase ac source. The suitable ac to ...

Description : A large dc motor is required to control the speed of the blower from a 3 -phase ac source. The suitable ac to dc converter is, 3 -phase (a) Fully controlled bridge converter ( ... bridge converter with freewheeling diode (c) Half controlled bridge converter (d) Converter pair in sequence control

Last Answer : a fullu control

Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Description : Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Last Answer : Functions of equipment: 1) circuit breaker: disconnects the locomotive equipment from the supply in the event of fault in the equipment / loco. 2) On load tap changer, used to control the ... 6) Traction motor: operates as per the required operating characteristics to take on the traction load.

A single-phase ac voltage source has 200 V rms and a system connected consumes an active power of 300 W....

Description : A single-phase ac voltage source has 200 V rms and a system connected consumes an active power of 300 W. What is the reactive power consumed by the system if 2.5 A rms current is drawn ?  (a) 100 VAR (b) 200 VAR (c) 300 VAR (d) 400 VAR

Last Answer : A single-phase ac voltage source has 200 V rms and a system connected consumes an active power of 300 W. What is the reactive power consumed by the system if 2.5 A rms current is drawn ? 400 VAR

The coating on the plastic tape you use in your cassette players is w) diamagnetic x) paramagnetic y) ferromagnetic z) a permanent magnet

Description : The coating on the plastic tape you use in your cassette players is w) diamagnetic x) paramagnetic y) ferromagnetic z) a permanent magnet

Last Answer : ANSWER: Y -- FERROMAGNETIC

Why is a capacitor used in a single phase motor and not in three phase motor ?

Description : Why is a capacitor used in a single phase motor and not in three phase motor ?

Last Answer : In 1-phase induction motor capacitor work is generate the auxiliary winding current than excite the main winding to rotor starts rotate. After rotor start rotating about 75% of their speed than auxiliary ... emf to start the motor.so,in 3-phase induction motor is self start induction motor.

working principle of single phase motor

Description : working principle of single phase motor

Last Answer : The Stator of single phase induction motor houses two windings  1. Main (Running) winding 2. Auxiliary (Starting ) winding Rotor of single phase induction motor is ... with starting winding or a capacitor may be permanently connected in series with Auxiliary (Starting ) winding.

Explain the working of a single phase capacitor start induction motor.

Description : Explain the working of a single phase capacitor start induction motor. 

Last Answer : Single phase capacitor start induction motor https://youtu.be/31lvvzU5Puc

In a single-phase induction motor, the operating direction is determined by the ________

Description : In a single-phase induction motor, the operating direction is determined by the ________ A) Rotor B) Stator C) Starting circuit D) None of these

Last Answer : In a single-phase induction motor, the operating direction is determined by the Starting circuit

What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is

Description : What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

Last Answer : What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

In the capacitor-start, capacitor-run single-phase induction motor

Description : In the capacitor-start, capacitor-run single-phase induction motor (A) two capacitors are connected across the main winding (B) when the centrifugal switch opens, the permanent capacitor is left ... left in the main winding circuit (D) two capacitors are connected across the auxiliary winding.

Last Answer : In the capacitor-start, capacitor-run single-phase induction motor when the centrifugal switch opens, the permanent capacitor is left in the auxiliary winding circuit

A capacitor start, capacitor run single phase induction motor is basically a : -

Description : A capacitor start, capacitor run single phase induction motor is basically a : -  a) ac series motor b) dc series motor c) 2 phase induction motor d) 3 phase induction motor

Last Answer : A capacitor start, capacitor run single phase induction motor is basically a : -  2 phase induction motor 

Starting torque can be obtained in the case of a single phase induction motor with identical main and ...

Description : Starting torque can be obtained in the case of a single phase induction motor with identical main and auxiliary windings by connecting:  (1) A capacitor across the mains (2) A capacitor in ... with the auxiliary winding (4) Equal value capacitors in series with the main and the auxiliary windings

Last Answer : Starting torque can be obtained in the case of a single phase induction motor with identical main and auxiliary windings by connecting:  A capacitor is series with the auxiliary winding.

In a capacitor start single-phase induction motor, the capacitor is connected in: ...

Description : In a capacitor start single-phase induction motor, the capacitor is connected in:  (A) series with the main winding (B) series with the auxiliary winding (C) series with both the windings (D) parallel with the auxiliary winding .

Last Answer : In a capacitor start single-phase induction motor, the capacitor is connected in: series with the auxiliary winding 

The squirrel-cage winding of a single-phase motor is placed in the_________.

Last Answer : The squirrel-cage winding of a single-phase motor is placed in the rotor.

Why a single phase motor is not a self starting motor?

Description : Why a single phase motor is not a self starting motor

Last Answer : The motor mechanical degree 360 degree this must covered revolving field so single phase to starting need starting winding with 90 degree to main winding

In the illustrated ground detection system with a ground on phase A, if the switch is opened __________. EL-0009 A. lamp A will dim or go out depending on the severity of the ground B. all three lamps will return to their normal brightness indicating that the bulbs are not burnt out C. lamps B and C will dim lamp A will be brighter D. lamp A will start flickering if the ground is in an AC induction motor

Description : In the illustrated ground detection system with a ground on phase A, if the switch is opened __________. EL-0009 A. lamp A will dim or go out depending on the severity of the ground B. all three ... lamp A will be brighter D. lamp A will start flickering if the ground is in an AC induction motor

Last Answer : Answer: B

The reversal of an AC, three-phase, induction motor is accomplished by ______________. A. changing all three motor leads B. reversing the position of the slip rings C. interchanging any two of the three motor leads D. interchanging any two brushes

Description : The reversal of an AC, three-phase, induction motor is accomplished by ______________. A. changing all three motor leads B. reversing the position of the slip rings C. interchanging any two of the three motor leads D. interchanging any two brushes

Last Answer : Answer: C

The most suitable servomotor for low power applications is (A) a dc series motor. (B) a dc shunt motor. (C) an ac two-phase induction motor. (D) an ac series motor.

Description : The most suitable servomotor for low power applications is (A) a dc series motor. (B) a dc shunt motor. (C) an ac two-phase induction motor. (D) an ac series motor.

Last Answer : (B) a dc shunt motor.

To reverse the direction of rotation of a three-phase AC induction motor, do one of the following: w) reverse any two of the three-phase connections x) change the frequency of the applied AC power y) operate the motor below the stall torque at very high slip z) none of the above

Description : To reverse the direction of rotation of a three-phase AC induction motor, do one of the following: w) reverse any two of the three-phase connections x) change the frequency of the applied AC power y) operate the motor below the stall torque at very high slip z) none of the above

Last Answer : ANSWER: W -- REVERSE ANY TWO OF THE THREE-PHASE CONNECTIONS 

The direction of rotation of an inverter fed 3-phase ac motor is reversed by

Description : The direction of rotation of an inverter fed 3-phase ac motor is reversed by (A) a mechanical reversing switch (B) reversing the input dc link voltage (C) operating the inverter as a rectifier (D) changing the sequence of switching

Last Answer : The direction of rotation of an inverter fed 3-phase ac motor is reversed by changing the sequence of switching

A three-phase synchronous motor connected to ac mains is running at full load and unity power factor.

Description : A three-phase synchronous motor connected to ac mains is running at full load and unity power factor. lf its shaft load is reduced by half and field current is held constant then its new power factor will be

Last Answer : Leading

Which DVD/VCR combo players can record DVDs?

Description : Which DVD/VCR combo players can record DVDs?

Last Answer : Any of the players that say DVD-RW can record DVD's, but you will pay more for it.

do any DVD players also record?

Description : do any DVD players also record?

Last Answer : Yes, there are plenty of DVD players that also record. They are just as simple to program as a VCR, and many are very afforadable.