What is the basic principle of operation of a klystron?

1 Answer

Answer :

Velocity modulation

Related questions

Description : If the constant-speed electrons in a reflex klystron remain in the repeller field for 1 3/4 cycles, what is the mode of operation?

Last Answer : Mode 2.

Description : What limits the tuning range around the center frequency of a reflex klystron in a particular mode of operation?

Last Answer : The half-power points of the mode.

Description : What can be added to the basic two-cavity klystron to increase the amount of velocity modulation and the power output?

Last Answer : Intermediate cavities between the input and output cavities.

Description : Klystron operation is based on the principle of  a) Velocity modulation b) Amplitude modulation c) frequency modulation d) Phase modulation

Last Answer : Klystron operation is based on the principle of  Velocity modulation 

Description : What type of klystron is used as the final stage of a power- amplifier transmitter?

Last Answer : Multicavity klystron.

Description : What type of klystron is used as the final stage of a power- amplifier transmitter?

Last Answer : Multicavity klystron.

Description : Debunching of the electron bunches in the higher modes of a reflex klystron has what effect on output power?

Last Answer : Power is reduced.

Description : The constant-speed electrons of an electron bunch in a reflex klystron must remain in the repeller field for what minimum time?

Last Answer : Three-quarter cycle.

Description : When the repealer potential is constant, what property of the electron determines how long it will remain in the drift space of the reflex klystron?

Last Answer : Velocity.

Description : What element of the reflex klystron replaces the output cavity of a normal klystron?

Last Answer : The reflector or repeller.

Description : The cavities of a multicavity klystron are tuned to slightly different frequencies in what method of tuning?

Last Answer : Stagger tuning.

Description : In a multicavity klystron, tuning all the cavities to the same frequency has what effect on the bandwidth of the tube?

Last Answer : The bandwidth decreases.

Description : Which cavity of a three-cavity klystron causes most of the velocity modulation?

Last Answer : The middle cavity.

Description : How is the electron beam of a three-cavity klystron accelerated toward the drift tube?

Last Answer : A large negative pulse is applied to the cathode.

Description : A two-cavity klystron without a feedback path will operate as what type of circuit?

Last Answer : Amplifier.

Description : The two-cavity klystron uses what cavity as an output cavity?

Last Answer : The catcher cavity.

Description : The electrons in the beam of a klystron are speeded up by a high dc potential applied to what elements?

Last Answer : The accelerator grid and the buncher grids.

Description : What should you do if a klystron becomes gassy?

Last Answer : Restore it to serviceable condition by operating it temporarily at reduced beam voltage.

Description : A major and basic advantage for the use of a klystron. A. High power B. Efficiency C. Lesser noise D. Cheaper

Last Answer : A. High power

Description : The underlying principle of operation of the parametric amplifier is based on what property?

Last Answer : Reactance.

Description : What is the basic principle of a magnetic amplifier?

Last Answer : change in inductance in a series LR circuit causes a change in true power.

Description : What Is Basic Principle Of Operation Of Alternators/dc Generators?

Last Answer : They are working on the fundamental principle based on Faraday’s Laws of Electromagnetic Induction. This law states that, When a current carrying conductor moves in magnetic field, it induces an EMF.

Description : What is the basic principle of operation of a transformer?  (A) Self-induction (B) Mutual-induction (C) Static-induction (D) Dynamic-induction 

Last Answer : B.  Transformer works on principle of MUTUAL INDUCTION. When voltage is applied to the primary winding of the transformer, current flows through the current called magnetising current results in ... . Thus power flow from primary to secondary circuit is simply based on the mutual induction.

Description : Which of the following types of HPA is not used in earth stations? A. TWT B. Transistor C. Klystron D. Magnetron

Last Answer : D. Magnetron

Description : Describe working of Reflex Klystron amplifier with a neat diagram.

Last Answer : Operation: It is assumed that the oscillations are set up in the tube initially due to noise or switching transients and these oscillations are sustained by device operation. ... on the reference electron. These bunch transfer maximum energy to the gap to get sustained oscillations.

Description : A two cavity klystron tube is a  (A) velocity modulated tube (B) frequency modulated tube (C) Amplitude modulated tube (D) simple triode

Last Answer : A two cavity klystron tube is a velocity modulated tube

Description : In a Klystron amplifier, the RF voltage produces  (a) amplitude modulation (b) frequency modulation (c) phase modulation (d) velocity modulation

Last Answer : In a Klystron amplifier, the RF voltage produces velocity modulation

Description : In a klystron amplifier the input cavity is called:  (1) Buncher (2) Catcher (3) Pierce gun (4) Collector

Last Answer : In a klystron amplifier the input cavity is called: Buncher.

Description : Reflex klystron is a:  (1) Low power generator (2) High power oscillator (3) Low gain amplifier (4) Not an oscillator

Last Answer : Reflex klystron is a: Low power generator.

Last Answer : The modes in a reflex Klystron gives the same frequency but different transit time.

Description : The field arrangements in waveguides are divided into what two categories to describe the various modes of operation?

Last Answer : Transverse electric (TE) and transverse magnetic (TM).

Description : What amplifier class of operation is the most inefficient but has the least distortion?

Last Answer : Class A.

Description : What two primary items determine the class of operation of an amplifier?

Last Answer : The amount of bias and the amplitude of the input signal

Description : Once ionization has occurred in a thyratron, what control does the control grid have over the tube’s operation?

Last Answer : None.

Description : What type of clock is used when more than one operation is to be completed during one clock cycle?

Last Answer : . A multiphase clock.

Description : What is the sign of operation for the X-OR gate?

Last Answer : XOR

Description : What is the key to FET operation?

Last Answer : Effective cross-sectional area of the channel.

Description : What type of bias is required for proper operation of a photodiode?

Last Answer : Reverse bias.

Description : The TRIAC is similar in operation to what device?

Last Answer : SCR

Description : What type of diagram is the most useful in learning the overall operation of a system?

Last Answer : A schematic diagram.

Description : What is the effect on magnetron operation if the magnetic field strength is too high?

Last Answer : The magnetron will not oscillate.

Description : What is the effect on magnetron operation if the magnetic field strength is too high?

Last Answer : The magnetron will not oscillate.

Description : What are the required radar inputs for proper indicator operation?

Last Answer : Triggers, video, and antenna information.

Description : Tracking radar searches a small volume of space during which phase of operation?

Last Answer : Acquisition.

Description : What radar subsystem supplies timing signals to coordinate the operation of the complete system?

Last Answer : Synchronizer.

Description : Quality fiber-end preparation is essential for proper system operation. What properties must an optical fiber-end face have to ensure proper fiber connection?

Last Answer : Be flat, smooth, and perpendicular to the fiber axis.

Description : In single mode operation, the value of the normalized frequency (V) should remain near the 2.405 level. If the value of V is less than 1, do single mode fibers carry a majority of the power in the core or cladding material?

Last Answer : Cladding material.

Description : For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Last Answer : High.

Description : Describe the operation of an optical detector

Last Answer : It is a transducer that converts an optical signal into an electrical signal. It does this by generating an electrical current proportional to the intensity of incident optical radiation.

Description : A computer that is designed to perform a specific operation and usually satisfies the needs of a particular type of problem, is said to be what type of computer?

Last Answer : Special-purpose.