What type of bias is required for proper operation of a photodiode?

Question

What type of bias is required for proper operation of a photodiode?

asked Aug 20, 2021 by anonymous

1 Answer

Related questions

What are the required radar inputs for proper indicator operation?

Description : What are the required radar inputs for proper indicator operation?

Last Answer : Triggers, video, and antenna information.

What type of bias is required to cause an LED to produce light?

Description : What type of bias is required to cause an LED to produce light?

Last Answer : Forward bias.

What is the resistance level of a photodiode in total darkness?

Description : What is the resistance level of a photodiode in total darkness?

Last Answer : Very high.

Will dark current increase or decrease as the temperature of the photodiode increases?

Description : Will dark current increase or decrease as the temperature of the photodiode increases?

Last Answer : Increase.

Describe the working principle of photodiode with proper diagram.

Description : Describe the working principle of photodiode with proper diagram.

Last Answer : Diagram of photo diode : Working principle of photo diode : When photons of energy greater than 1.1 eV hit the diode, electron-hole pairs are created. The intensity of photon ... , the holes move toward the anode and the electrons move toward the cathode, thereby producing photocurrent.

What is photodiode? Draw the symbol and explain operation of photodiode.

Description : What is photodiode? Draw the symbol and explain operation of photodiode.

Last Answer : A photodiode is a light detector that converts light into an electrical current. A photodiode is a semi-conductor device, with a p-n junction and an intrinsic layer between p and n layers ... current is independent of reverse bias voltage. Reverse current is mostly depends on the light intensity.

Quality fiber-end preparation is essential for proper system operation. What properties must an optical fiber-end face have to ensure proper fiber connection?

Description : Quality fiber-end preparation is essential for proper system operation. What properties must an optical fiber-end face have to ensure proper fiber connection?

Last Answer : Be flat, smooth, and perpendicular to the fiber axis.

What type of bias (positive or negative) is added to a negative damper for the most positive extremity of the wave shape to be clamped above 0 volts?

Description : What type of bias (positive or negative) is added to a negative damper for the most positive extremity of the wave shape to be clamped above 0 volts?

Last Answer : Positive bias.

What type damper (with bias) clamps the most negative extremity of the output waveform to a negative potential?

Description : What type damper (with bias) clamps the most negative extremity of the output waveform to a negative potential?

Last Answer : Positive clamper with negative bias.

What type of bias is used where only moderate changes in ambient temperature are expected?

Description : What type of bias is used where only moderate changes in ambient temperature are expected?

Last Answer : Self-bias.

What type of bias makes a diode act as a closed switch?

Description : What type of bias makes a diode act as a closed switch?

Last Answer : Forward bias.

What type of bias opposes the PN junction barrier?

Description : What type of bias opposes the PN junction barrier?

Last Answer : Forward.

What type of bias requires constant current flow through the cathode

Description : What type of bias requires constant current flow through the cathode

Last Answer : Cathode biasing.

A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Description : A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Last Answer : Negative potential.

What would be the output of a negative clamper with a bias potential of −5 volts and an input voltage swing from +50 to −50 volts?

Description : What would be the output of a negative clamper with a bias potential of −5 volts and an input voltage swing from +50 to −50 volts?

Last Answer : -5 volts.

To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Description : To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Last Answer : Positive, more positive.

What is the most widely used combination-bias system?

Description : What is the most widely used combination-bias system?

Last Answer : The voltage-divider type.

Applying a reverse bias to the gate of an FET has what effect?

Description : Applying a reverse bias to the gate of an FET has what effect?

Last Answer : Source-to-drain resistance increases.

When the reverse bias on a varactor is increased, what happens to the effective capacitance?

Description : When the reverse bias on a varactor is increased, what happens to the effective capacitance?

Last Answer : Capacitance decreases.

Which breakdown theory explains the action that takes place in a heavily doped PN-junction with a reverse bias of less than 5 volts?

Description : Which breakdown theory explains the action that takes place in a heavily doped PN-junction with a reverse bias of less than 5 volts?

Last Answer : Zener effect.

What is used to bias a magnetic amplifier so that the control winding remains free to accept control (input) signals?

Description : What is used to bias a magnetic amplifier so that the control winding remains free to accept control (input) signals?

Last Answer : A bias winding and associated circuitry.

A, when there is an increase in the input voltage, the forward bias of Q1 increases/decreases (which one).

Description : A, when there is an increase in the input voltage, the forward bias of Q1 increases/decreases (which one).

Last Answer : Increases.

In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Description : In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Last Answer : Negative.

What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

Description : What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

Last Answer : The negative-resistance property.

Why does using ac vice dc bias voltage result in a stronger output signal?

Description : Why does using ac vice dc bias voltage result in a stronger output signal?

Last Answer : Because an ac bias voltage of the proper frequency and level places the input signal away from both steps in the magnetism curve. The result is two undistorted output signals that are combined into one strong output.

What are three advantages of adding an ac bias voltage to the input signal instead of adding a fixed dc bias voltage?

Description : What are three advantages of adding an ac bias voltage to the input signal instead of adding a fixed dc bias voltage?

Last Answer : a. Reproduces a stronger output signal. b. Greatly improves the SNR. c. Greatly reduces the natural tape hiss.

Why does adding dc vice ac bias voltage to the input signal result in a poor signal-to-noise ratio (SNR)?

Description : Why does adding dc vice ac bias voltage to the input signal result in a poor signal-to-noise ratio (SNR)?

Last Answer : With dc bias, the SNR is poor because only a small portion of the magnetism curve is straight enough to use, thus the output signal is weak compared with the natural tape hiss.

How does dc bias added to the input signal correct the distortion in the output signal?

Description : How does dc bias added to the input signal correct the distortion in the output signal?

Last Answer : The dc bias moves the input signal away from the step in the magnetism curve. This prevents the input signal from crossing the zero-point of the magnetism curve.

An FET has a gate source bias of 2 V. The ac input signal is ± 1.2 V. The class of operation is A) A B) B C) C D) AB

Description : An FET has a gate source bias of 2 V. The ac input signal is ± 1.2 V. The class of operation is A) A B) B C) C D) AB

Last Answer : D) AB

Which of the following diodes is limited to the reverse-bias region in its region of operation?

Description : Which of the following diodes is limited to the reverse-bias region in its region of operation? (1) Schottky (2) Tunnel (3) Photodiode (4) Rectifier

Last Answer : Photodiode is limited to the reverse-bias region in its region of operation.

After turning on the fluorescent lamp shown in the illustration, you note that the ends of the tube alternately glow and becomce dark without illuminating the center. The most obable cause for this is that ____________. EL-0081 A. component 'D' is loose and due to the ship's vibrations makes and breaks contact B. the power system's voltage is fluctuating in and out of the range necessary for proper operation C. component 'A' is shorted and therefore unable to produce the high voltage required to start the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Description : After turning on the fluorescent lamp shown in the illustration, you note that the ends of the tube alternately glow and becomce dark without illuminating the center. The most obable cause for ... the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Last Answer : Answer: C

The illustration shows a fluorescent light fixture. The ends of the lamp alternately glow and become dark, but the tube will not light. The most probable cause is that ____________. EL-0081 A. component 'D' is loose and due to the ship's vibrations makes and breaks contact B. the power system's voltage is fluctuating in and out of the range necessary for proper operation C. component 'A' is shorted and therefore unable to produce the high voltage required to start the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Description : The illustration shows a fluorescent light fixture. The ends of the lamp alternately glow and become dark, but the tube will not light. The most probable cause is that ____________. EL-0081 ... start the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Last Answer : Answer: C

During start-up of the circuit shown in the illustration, it is noted that the ends of component 'C' alternately glow and become dark without the tube illuminating. The most probable cause for this is that ____________. EL-0081 A. component 'D' is loose and due to the ship's vibrations makes and breaks contact B. the power system's voltage is fluctuating in and out of the range necessary for proper operation C. component 'A' is shorted and therefore unable to produce the high voltage required to start the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Description : During start-up of the circuit shown in the illustration, it is noted that the ends of component 'C' alternately glow and become dark without the tube illuminating. The most probable cause ... start the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Last Answer : Answer: C

Avalanche photodiode receivers can detect bits of transmitted data by receiving a. 100 photons b. 200 photons c. 2000 photons d. 300 photons

Description : Avalanche photodiode receivers can detect bits of transmitted data by receiving a. 100 photons b. 200 photons c. 2000 photons d. 300 photons

Last Answer : 200 photons

Avalanche photodiode receivers candetect hits of transmitted databy receiving A. 100 photons B. 200 photons C. 300 photons D. 400 photons E. None of the above

Description : Avalanche photodiode receivers candetect hits of transmitted databy receiving A. 100 photons B. 200 photons C. 300 photons D. 400 photons E. None of the above

Last Answer : 200 photons

The range of wavelength values that a given photodiode will respond. ∙ A. spectral response ∙ B. permeance ∙ C. dark current ∙ D. reluctance

Description : The range of wavelength values that a given photodiode will respond. ∙ A. spectral response ∙ B. permeance ∙ C. dark current ∙ D. reluctance

Last Answer : A. spectral response

The leakage current that flows through a photodiode with no light input ∙ A. dark voltage ∙ B. dark impedance ∙ C. dark power ∙ D. dark current

Description : The leakage current that flows through a photodiode with no light input ∙ A. dark voltage ∙ B. dark impedance ∙ C. dark power ∙ D. dark current

Last Answer : D. dark current

Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Description : Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Last Answer : Avalanche photodiode

Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Description : Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Last Answer : D. Avalanche photodiode

Which of the following is the fastest light sensor ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Phototransistor ∙ d. Avalanche photodiode

Description : Which of the following is the fastest light sensor ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Phototransistor ∙ d. Avalanche photodiode

Last Answer : ∙ d. Avalanche photodiode

Which of the following is NOT a common light detector ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Photodiode ∙ d. Avalanche photodiode

Description : Which of the following is NOT a common light detector ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Photodiode ∙ d. Avalanche photodiode

Last Answer : ∙ b. Photovoltaic diode

APD stands for: a. Avalanche Photodiode b. Advanced Photodiode c. Avalanche Photo Detector d. Advanced Photo Detector

Description : APD stands for: a. Avalanche Photodiode b. Advanced Photodiode c. Avalanche Photo Detector d. Advanced Photo Detector

Last Answer : a. Avalanche Photodiode

The range of wavelength values that a given photodiode will respond.

Description : The range of wavelength values that a given photodiode will respond.

Last Answer : spectral response

A photodiode can switch its current ON or OFF in (a) nano second (b) milli second (c) micro second (d) centi second

Description : A photodiode can switch its current ON or OFF in (a) nano second (b) milli second (c) micro second (d) centi second

Last Answer : (a) nano second

A sensor which changes light intensity into electric voltage. (a) LDR (b) thermistor (c) photodiode (d) photovoltaic

Description : A sensor which changes light intensity into electric voltage. (a) LDR (b) thermistor (c) photodiode (d) photovoltaic

Last Answer : (a) LDR

Write working principle of photodiode and state its two applications.

Description : Write working principle of photodiode and state its two applications.

Last Answer : Working principle of photodiode: Working principle: A photodiode is a PN- junction diode that consumes light energy to produce electric current. Sometimes it is also called as photo- ... Optical remote control Smoke detectors Flame detectors Intruder alert security system

Describe the operating principle of photodiode with sketch

Description : Describe the operating principle of photodiode with sketch

Last Answer : Operating principle of photodiode: A photodiode is a PN junction or PIN structure. When a photon of sufficient energy strikes the diode, it excites an electron, thereby creating a mobile electron ... ) along its direction while the photocurrent remains virtually the same. Diagram optional:

Write two applications of i) LED ii) photodiode.

Description : Write two applications of i) LED ii) photodiode.

Last Answer : LED: 1. In the opto- couplers. 2. In the infrared remote controls. 3. As indicators in various electronic circuits. 4. In seven segment and alphanumeric displays. 5. In optical switching ... As photo (light) detector. 5. In light intensity meters. 6. In the object counting system.

Draw the construction of Avalanche photodiode. State its working principle.

Description : Draw the construction of Avalanche photodiode. State its working principle.

Last Answer : Avalanche photodiode are used to obtain the large gain, i.e. large output because Conventional photodiodes and PIN photodiodes obtain the limited gain. CONSTRUCTION: APD's are usually variation ... in avalanche with the number of carriers growing exponentially as the process continues.

Draw the symbol of photodiode.

Description : Draw the symbol of photodiode.

Last Answer : Symbol of photodiode.

anonymous · Answer 1 · 2021-08-20T17:49:29+0000

Answer :

Reverse bias.

answered Aug 20, 2021 by anonymous

What type of bias is required for proper operation of a photodiode?

Please log in or register to add a comment.

Please log in or register to answer this question.

1 Answer

Answer :

Please log in or register to add a comment.

Related questions