What effect do longer deflection plates have on the electron beam?

What effect do longer deflection plates have on the electron  beam?
by

1 Answer

Answer :

A greater deflection angle.
by

Related questions

What effect does closer spacing of plates have on the electron beam?

Description : What effect does closer spacing of plates have on the electron beam?

Last Answer : A greater deflection angle.

What effect does closer spacing of plates have on the electron beam?

Description : What effect does closer spacing of plates have on the electron beam?

Last Answer : A greater deflection angle.

What type of deflection is preferred for a crt electron beam?

Description : What type of deflection is preferred for a crt electron beam?

Last Answer : . Electromagnetic.

A circuit which develops voltage across the horizontal deflection plates is known as a) Time base generator b) Electron gun c) Thermionic diode d) Zener diode

Description : A circuit which develops voltage across the horizontal deflection plates is known as a) Time base generator b) Electron gun c) Thermionic diode d) Zener diode

Last Answer : a) Time base generator

Why are the ends of the deflection plates bent outward?

Description : Why are the ends of the deflection plates bent outward?

Last Answer : To permit wide-angle deflection of the bea

The horizontal-deflection plates are used to produce what function?

Description : The horizontal-deflection plates are used to produce what function?

Last Answer : Time and/or frequency relationships.

The vertical-deflection plates are used to reproduce what function?

Description : The vertical-deflection plates are used to reproduce what function?

Last Answer : Amplitude.

Is the deflection angle greater with higher or lower potential on the plates?

Description : Is the deflection angle greater with higher or lower potential on the plates?

Last Answer : Higher potential.

Why are the ends of the deflection plates bent outward?

Description : Why are the ends of the deflection plates bent outward?

Last Answer : To permit wide-angle deflection of the beam.

The horizontal-deflection plates are used to produce what function?

Description : The horizontal-deflection plates are used to produce what function?

Last Answer : Time and/or frequency relationships.

The vertical-deflection plates are used to reproduce what function?

Description : The vertical-deflection plates are used to reproduce what function?

Last Answer : Amplitude.

Is the deflection angle greater with higher or lower potential on the plates?

Description : Is the deflection angle greater with higher or lower potential on the plates?

Last Answer : Higher potential.

The vertical deflection of an electron beam on the screen of a CRO is measured to be 8 mm. Now, the

Description : The vertical deflection of an electron beam on the screen of a CRO is measured to be 8 mm. Now, the potential difference between the Y-plates is doubled, and simultaneously the pre-accelerating anode voltage is reduced to half of ... on the screen would become (A) 64 mm (B) 32 mm (C) 8 mm (D) 1 mm

Last Answer : The vertical deflection of an electron beam on the screen of a CRO is measured to be 8 mm. Now, the potential difference between the Y-plates is doubled, and simultaneously the pre-accelerating ... of its previous value. Then, the vertical deflection of the beam on the screen would become 32 mm

Is the deflection angle greater when the beam is moving faster or slower?

Description : Is the deflection angle greater when the beam is moving faster or slower?

Last Answer : Slower beam.

Is the deflection angle greater when the beam is moving faster or slower?

Description : Is the deflection angle greater when the beam is moving faster or slower?

Last Answer : Slower beam.

A major breakthrough in the studies of cells came with the development of electron microscope. This is because (a) the electron microscope is more powerful than the light microscope as it uses a beam of electrons which has wavelength much longer than that of photons (b) the resolving power of the electron microscope is much higher than that of the light microscope (c) the resolving power of the electron microscope is 200 - 350 nm as compared to 0.1 - 0.2 nm for the light microscope (d) electron beam can pass through thick materials, whereas light microscopy requires thin sections.

Description : A major breakthrough in the studies of cells came with the development of electron microscope. This is because (a) the electron microscope is more powerful than the light microscope as it ... (d) electron beam can pass through thick materials, whereas light microscopy requires thin sections.

Last Answer : (b) the resolving power of the electron microscope is much higher than that of the light microscope

The electron beam in a CRT is made to sweep from left to right across the screen. What tube element causes this sweeping motion?

Description : The electron beam in a CRT is made to sweep from left to right across the screen. What tube element causes this sweeping motion?

Last Answer : The horizontal-deflection plate.

What relationship must exist between the electron beam and the traveling wave for bunching to occur in the electron beam of a twt?

Description : What relationship must exist between the electron beam and the traveling wave for bunching to occur in the electron beam of a twt?

Last Answer : The traveling wave must have a forward velocity equal to or less than the speed of the electrons in the beam.

How is the electron beam of a three-cavity klystron accelerated toward the drift tube?

Description : How is the electron beam of a three-cavity klystron accelerated toward the drift tube?

Last Answer : A large negative pulse is applied to the cathode.

What kind of voltage is applied to the horizontal deflection plates of the oscilloscope?

Description : What kind of voltage is applied to the horizontal deflection plates of the oscilloscope?

Last Answer : sweep voltage

The ___________ of a CRO controls the brightness of the spot formed on the screen a) Filament b) Grid c) Deflection plates d) Cathode

Description : The ___________ of a CRO controls the brightness of the spot formed on the screen a) Filament b) Grid c) Deflection plates d) Cathode

Last Answer : b) Grid

An important part of inkjet printer is: (a) Deflection plates (b) Toner (c) Drum (d) None of these

Description : An important part of inkjet printer is: (a) Deflection plates (b) Toner (c) Drum (d) None of these

Last Answer : (a) Deflection plates

If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of

Description : If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is   (a) 33.2 V/cm (b) 0.03 cm/V (c) 66.4 V/cm (d) 0.015 cm/V

Last Answer : If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is 0.03 cm/V

Horizontal deflection plates of CRO are placed generally

Description : Horizontal deflection plates of CRO are placed generally   (a) Horizontal (b) Vertical (c) Diagonal (d) (a) or (b)  

Last Answer : Horizontal

What effect does the shielding of the screen grid by the control grid have on plate current in beam-forming tetrodes?

Description : What effect does the shielding of the screen grid by the control grid have on plate current in beam-forming tetrodes?

Last Answer : By increasing the number of electrons that reach the plate, plate current is increased.

In the Compton effect, a photon of wavelength l (read: lambdw) collides with a stationary electron. The wavelength of the emitted photon is: w) longer than l x) shorter than l y) the same as l z) no photon is emitted

Description : In the Compton effect, a photon of wavelength l (read: lambdw) collides with a stationary electron. The wavelength of the emitted photon is: w) longer than l x) shorter than l y) the same as l z) no photon is emitted

Last Answer : ANSWER: W -- LONGER THAN l

Debunching of the electron bunches in the higher modes of a reflex klystron has what effect on output power?

Description : Debunching of the electron bunches in the higher modes of a reflex klystron has what effect on output power?

Last Answer : Power is reduced.

What is the effect upon an electron that enters the buncher gap when the potential across the grids is at 0 volts?

Description : What is the effect upon an electron that enters the buncher gap when the potential across the grids is at 0 volts?

Last Answer : There is no effect

What will be the effect upon an electron traveling in the opposite direction to the lines of force in an electrostatic field?

Description : What will be the effect upon an electron traveling in the opposite direction to the lines of force in an electrostatic field?

Last Answer : The electron will be accelerated.

Why does the grid have a greater effect than the plate on electron flo

Description : Why does the grid have a greater effect than the plate on electron flo

Last Answer : Because it is closer to the cathode.

Light travels faster in a material with a lower refractive index. Therefore, light rays that travel a longer distance in a lower refractive index travel at a greater average velocity. What effect does this have on multimode graded-index fiber modal dispersion and bandwidth?

Description : Light travels faster in a material with a lower refractive index. Therefore, light rays that travel a longer distance in a lower refractive index travel at a greater average velocity. What effect does this have on multimode graded-index fiber modal dispersion and bandwidth?

Last Answer : Decreases the time difference between light rays, which reduces modal dispersion and increases fiber bandwidth.

Why did the deflection of the beam by magnet suggest that the cathode ray contained charged particles?

Description : Why did the deflection of the beam by magnet suggest that the cathode ray contained charged particles?

Last Answer : Need answer

Which among the following is the value of static deflection (δ) for a fixed beam with central point load? A ( Wl 3 ) /(192 EI) B ( Wl 2 ) /(192 EI) C (Wl 3 ) /(384 EI) D None of the above

Description : Which among the following is the value of static deflection (δ) for a fixed beam with central point load? A ( Wl 3 ) /(192 EI) B ( Wl 2 ) /(192 EI) C (Wl 3 ) /(384 EI) D None of the above

Last Answer : A ( Wl 3 ) /(192 EI)

δ = (W a 2 b 2 ) / (3 EIL) is the value of deflection for ______ A. simply supported beam which has central point load B. simply supported beam which has eccentric point load C. simply supported beam which has U.D.L. point load per unit length D. fixed beam which has central point load

Description : δ = (W a 2 b 2 ) / (3 EIL) is the value of deflection for ______ A. simply supported beam which has central point load B. simply supported beam which has eccentric point load C. simply supported beam which has U.D.L. point load per unit length D. fixed beam which has central point load

Last Answer : B. simply supported beam which has eccentric point load

Which among the following is the value of static deflection (δ) for a fixed beam with central point load? a. (Wl 3 ) /(192 EI) b. (Wl 2 ) /(192 EI) c. (Wl 3 ) /(384 EI)

Description : Which among the following is the value of static deflection (δ) for a fixed beam with central point load? a. (Wl 3 ) /(192 EI) b. (Wl 2 ) /(192 EI) c. (Wl 3 ) /(384 EI)

Last Answer : a. (Wl 3 ) /(192 EI)

δ = (W a 2 b 2 ) / (3 EIl) is the value of deflection for ______ a. simply supported beam which has central point load b. simply supported beam which has eccentric point load c. simply supported beam which has U.D.L. point load per unit length d. fixed beam which has central point load

Description : δ = (W a 2 b 2 ) / (3 EIl) is the value of deflection for ______ a. simply supported beam which has central point load b. simply supported beam which has eccentric point load c. simply supported beam which has U.D.L. point load per unit length d. fixed beam which has central point load

Last Answer : b. simply supported beam which has eccentric point load

The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with a uniformly distributed load l t per horizontal length is (where Ic is the M.I. at the crown, which varies as the slope of the arch). (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Description : The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with  a uniformly distributed load l t per horizontal length is (where Ic  is the M.I. at the crown, which  varies as the slope ... arch).  (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Last Answer : (D) 200/E

The maximum deflection of a simply supported beam of span L, carrying an isolated load at the centre of the span; flexural rigidity being EI, is (A) WL3 /3EL (B) WL3 /8EL (C) WL3 /24EL (D) WL3 /48EL

Description : The maximum deflection of a simply supported beam of span L, carrying an isolated load at the  centre of the span; flexural rigidity being EI, is  (A) WL3 /3EL (B) WL3 /8EL (C) WL3 /24EL (D) WL3 /48EL

Last Answer : (D) WL3 /48EL

A simply supported beam deflects by 5 mm when it is subjected to a concentrated load of 10 kN at its centre. What will be deflection in a 1/10 model of the beam if the model is subjected to a 1 kN load at its centre? (A) 5 mm (B) 0.5 mm (C) 0.05 mm (D) 0.005 mm

Description : A simply supported beam deflects by 5 mm when it is subjected to a concentrated load of 10 kN at its centre. What will be deflection in a 1/10 model of the beam if the model is subjected to a 1 kN load at its centre? (A) 5 mm (B) 0.5 mm (C) 0.05 mm (D) 0.005 mm

Last Answer : (A) 5 mm

Bending moment at any section in a conjugate beam gives in the actual beam (A) Slope (B) Curvature (C) Deflection (D) Bending moment

Description : Bending moment at any section in a conjugate beam gives in the actual beam (A) Slope (B) Curvature (C) Deflection (D) Bending moment

Last Answer : (C) Deflection

The maximum deflection of a simply supported beam of length L with a central load W, is (A) WL²/48EI (B) W²L/24EI (C) WL3 /48EI (D) WL²/8EI

Description : The maximum deflection of a simply supported beam of length L with a central load W, is (A) WL²/48EI (B) W²L/24EI (C) WL3 /48EI (D) WL²/8EI

Last Answer : (C) WL3 /48EI

The ratio of the maximum deflection of a cantilever beam with an isolated load at its free end and with a uniformly distributed load over its entire length, is (A) 1 (B) 24/15 (C) 3/8 (D) 8/3

Description : The ratio of the maximum deflection of a cantilever beam with an isolated load at its free end and with a uniformly distributed load over its entire length, is (A) 1 (B) 24/15 (C) 3/8 (D) 8/3

Last Answer : (D) 8/3

If the width of a simply supported beam carrying an isolated load at its centre is doubled, the deflection of the beam at the centre is changed by (A) 1/2 (B) 1/8 (C) 2 (D) 8

Description : If the width of a simply supported beam carrying an isolated load at its centre is doubled, the deflection of the beam at the centre is changed by (A) 1/2 (B) 1/8 (C) 2 (D) 8

Last Answer : (A) 1/2

If the width of a simply supported beam carrying an isolated load at its centre is doubled, the deflection of the beam at the centre is changed by (A) 2 times (B) 4 times (C) 8 times (D) 1/2 times

Description : If the width of a simply supported beam carrying an isolated load at its centre is doubled, the deflection of the beam at the centre is changed by (A) 2 times (B) 4 times (C) 8 times (D) 1/2 times

Last Answer : (C) 8 times

If the depth of a simply supported beam carrying an isolated load at its centre, is doubled, the deflection of the beam at the centre will be changed by a factor of (A) 2 (B) 1/2 (C) 8 (D) 1/8

Description : If the depth of a simply supported beam carrying an isolated load at its centre, is doubled, the deflection of the beam at the centre will be changed by a factor of (A) 2 (B) 1/2 (C) 8 (D) 1/8

Last Answer : (D) 1/8

If the width b and depth d of a beam simply supported with a central load are interchanged, the deflection at the centre of the beam will be changed in the ratio of (A) b/d (B) d/b (C) (d/b)2 (D) (b/d)

Description : If the width b and depth d of a beam simply supported with a central load are interchanged, the  deflection at the centre of the beam will be changed in the ratio of  (A) b/d (B) d/b (C) (d/b)2 (D) (b/d)

Last Answer : (D) (b/d)2

The maximum deflection of (A) A simply supported beam carrying a uniformly increasing load from either end and having the apex at the mid span is WL3 /60EI (B) A fixed ended beam carrying a distributed load over the span is WL3 /384EI (C) A fixed ended beam carrying a concentrated load at the mid span is WL3 /192EI (D) All the above

Description : The maximum deflection of  (A) A simply supported beam carrying a uniformly increasing load from either end and having  the apex at the mid span is WL3 /60EI (B) A fixed ended beam ... ended beam carrying a concentrated load at the mid span is WL3 /192EI (D) All the above 

Last Answer : (D) All the above 

A cantilever beam rectangular in cross-section is subjected to an isolated load at its free end. If the width of the beam is doubled, the deflection of the free end will be changed in the ratio of (A) 8 (B) 1/8 (C) 1/2 (D) 3

Description : A cantilever beam rectangular in cross-section is subjected to an isolated load at its free end. If the  width of the beam is doubled, the deflection of the free end will be changed in the ratio of  (A) 8  (B) 1/8  (C) 1/2  (D) 3

Last Answer : (C) 1/2 

A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Description : A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Last Answer : (D) Bending stress is same at every section along its longitudinal axis

Maximum deflection of a (A) Cantilever beam carrying a concentrated load W at its free end is WL3 /3EI (B) Simply supported beam carrying a concentrated load W at mid-span is WL3 /48EI (C) Cantilever beam, carrying a uniformly distributed load over span is WL3 /8EI (D) All the above

Description : Maximum deflection of a (A) Cantilever beam carrying a concentrated load W at its free end is WL3 /3EI (B) Simply supported beam carrying a concentrated load W at mid-span is WL3 /48EI (C) Cantilever beam, carrying a uniformly distributed load over span is WL3 /8EI (D) All the above

Last Answer : (D) All the above