What is the frequency that is twice the fundamental  frequency?

1 Answer

Answer :

Second harmonic.

Related questions

Description : A node having twice the frequency of the fundamental is called A. half harmonic B. harmonic C. double harmonic D. triple harmonic

Last Answer : harmonic

Description : If the fundamental frequency is 200 megahertz, what is the third harmonic?

Last Answer : 600 megahertz.

Description : The value of the normalized frequency parameter (V) relates the core size with mode propagation. When single mode fibers propagate only the fundamental mode, what is the value of V?

Last Answer : V≤2.405.

Description : A wavefront undergoes a phase change as it travels along the fiber. If the wavefront transverses the fiber twice and is reflected twice and the total phase change is equal to 1/2 p, will the wavefront disappear? If yes, why?

Last Answer : Yes, the wavefront will disappear because the total amount of phase collected must be an integer multiple of 2 p. (If the propagating wavefronts are out of phase, they will disappear. ... interfere with the wavefronts out of phase. This type of interference is called destructive interference.)

Description : What is the fundamental difference between the phase relationship of the harmonics of the square wave as compared to the harmonics of a peaked wave?

Last Answer : All the odd harmonics are in phase with the fundamental in the square wave. This is not true of the odd harmonics in the peaked wave.

Description : What is the fundamental element in program preparation?

Last Answer : The instruction.

Description : What are the three fundamental quantities involved in radar displays?

Last Answer : Range, bearing, and elevation.

Description : What happens to the fundamental mode as the operating wavelength becomes longer than the single mode cutoff wavelength?

Last Answer : The fundamental mode becomes increasingly lossy.

Description : What is the fundamental difference between analog and digital computers?

Last Answer : Digital computers deal with discrete quantities, while analog computers deal with continuous physical variables.

Description : What are the three fundamental requirements of a military communications system?

Last Answer : Reliability, security, and speed.

Description : State two fundamental properties of insulating materials.

Last Answer : Insulation resistance and dielectric strength.

Description : Which of the following expresses the relationship of the input and output frequencies in a full wave rectifier? A. The output frequency is the same as input frequency. B. The output frequency is ... frequency is twice the input frequency. D. The output frequency is four times the input frequency.

Last Answer : Answer: C

Description : ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Last Answer : C. twice

Description : Which of the following condition should be satisfied in the design of a vibration absorber ? A) Natural frequency of the auxiliary system should be equal to the natural frequency of the main ... D) Natural frequency of the auxiliary system should be twice natural frequency of the main system

Last Answer : A) Natural frequency of the auxiliary system should be equal to the natural frequency of the main system

Description : Resonance is a phenomenon when the frequency of external exciting force is A) Twice the natural frequency of the system B) Half the natural frequency of the system C) Same as the natural frequency of the system D) None of the above

Last Answer : C) Same as the natural frequency of the system

Description : The Nyquist theorem specifies the minimum samplingrate to be_______. A) equal to the lowest frequency of asignal B) equal to the highest frequency ofa signal C) twice thebandwidth of a signal D) twice thehighest frequencyof a signal

Last Answer : twice thehighest frequencyof a signal

Description : Given two sine waves A and B, if the frequency of A is twicethat of B, thenthe period of B is ________ thatof A. A) one-half B) twice C) the sameas D) indeterminate from

Last Answer : twice

Description : why the feeding frequency to a microprocessor s twice the operating frequency.

Last Answer : Ans-since 8085 microprocessor operating frequency 5 mega hz but operating frequency is 10 mega hz because crystal effect in processor

Description : If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Last Answer : a. Try another appropriate frequency

Description : The result whenever the sampling rate is less than twice the highest audio frequency.

Last Answer : alias

Description : If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Last Answer : a. Try another appropriate frequency

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

Description : If we wrap a second wire around a guitar string to increase its mass what effect does this have on the frequency and wavelength of the fundamental standing wave formed on that string?

Last Answer : What is the answer ?

Description : A resonant system has a fundamental frequency of 100 Hz. If the next higher frequency that gives a resonance are 300 Hz and 500 Hz, the system could be (a) A pip open at both ends (b) A pipe ... (c) A string vibrating between two fixed points (d) A pipe open at one end and closed at the other

Last Answer : Ans:(d)

Description : The fundamental characteristic of all waves are (a) Wavelength (b) Frequency (c) Velocity (d) All the above

Last Answer : Ans:(d)

Description : Quality of a musical note depends on – (1) Fundamental frequency (2) Amplitude of the wave (3) Harmonics present (4) Velocity of sound in the medium

Last Answer : (3) Harmonics present Explanation: Sound "quality" or "timbre" describes those characteristics of sound which allow the ear to distinguish sounds which have the same pitch and loudness. Timbre is mainly ... and the attack-decay envelope of the sound. Harmonic content is the most important of these.

Description : The lowest frequency produced by an instrument. A. Harmonic B. Fundamental C. Midrange D. 0 Hz

Last Answer : B. Fundamental

Description : Lowest frequency produced by a musical instrument. A. Fundamental B. Midrange C. Period D. Harmonic

Last Answer : A. Fundamental

Description : For a given system, the minimum frequency of a standing wave is in a A. fundamental mode B. lowest mode C. highest mode D. peak mode

Last Answer : fundamental mode

Description : 32 With S2 closed and S1 open, the current waveform in the delta winding will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. only third-harmonic D. none of these

Last Answer : C. Only third harmonic

Description : [31] With both S1 and S2 open, the core flux waveform will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. peaky with third-harmonic D. none of these

Last Answer : B. Flat topped with third harmonic

Description : An organ pipe which is open at both ends resonates at its fundamental frequency. Neglecting any end effects, what wavelength is formed by this pipe in this mode of vibration if the pipe is 2 meters long? w) 2 meters x) 4 meters y) 6 meters z) 8 meters.

Last Answer : ANSWER: X -- 4 METERS

Description : 1. How many orangutans disappear each year as result of palm oil farming? 2. Who decides about the reasonableness of the restrictions placed on Fundamental Rights? 3. Microwaves are electromagnetic waves with ... 19. Where is Over 90% of the world's biomass? 20. Who deciphered the Brahmi script?

Last Answer : Answer : 1. 5000 2. Courts 3. Giga hertz 4. Tundra region 5. Kharavela 6. MRF 7. Lillehammer 8. Javan rhino 9. Evergreen forests 10. Prakrit 11. Directive Principle 12. An atom 13. Rs. 100 ... 16. Arati Saha 17. A greater flamingo 18. Finance Bills 19. In tropical rain forests 20. James Princep

Description : Quality of a musical note depends on (1) Fundamental frequency (2) Amplitude of the wave (3) Harmonics present (4) Velocity of sound in the medium

Last Answer :  Harmonics present

Description : In a power transformer, the fundamental frequency of the hum arising due to magnetostriction is  (a) equal to the line frequency (b) double the line frequency (c) 4 times the line frequency (d) not related to the line frequency

Last Answer : In a power transformer, the fundamental frequency of the hum arising due to magnetostriction is double the line frequency

Description : The resonant frequency of electron wobble can be changed by variation of what force?

Last Answer : The applied magnetic field.

Description : What two variables determine the primary frequency of a resonant cavity?

Last Answer : Size and shape of the cavity.

Description : How will an iris that has portions along both the "a" and "b" dimension walls act at the resonant frequency?

Last Answer : As a shunt resistance.

Description : What determines the frequency, bandwidth, and power handling capability of a waveguide probe?

Last Answer : Size and shape

Description : When the frequency is decreased so that two quarter wavelengths are longer than the "a" (wide) dimension of the waveguide, what will happen?

Last Answer : Energy will no longer pass through the waveguide.

Description : What happens to the bus bar dimensions of the waveguide when the frequency is increased?

Last Answer : The bus bar becomes wider.

Description : The frequency range of a waveguide is determined by what dimensions?

Last Answer : . The "a" dimension.

Description : What is the primary lower-frequency limitation of waveguides?

Last Answer : Physical size.

Description : What is the region of the frequency spectrum from 1000 MHz to 100,000 MHz called?

Last Answer : Microwave region.

Description : In an astable multivibrator, which components determine the pulse repetition frequency?

Last Answer : RC coupling networks.

Description : hat establishes the value of the current that flows in the output of figure 4-43?

Last Answer : The frequency of the voltage input.

Description : A cavity that vibrates at its natural frequency produces a louder sound than at other frequencies. What term is used to describe this phenomenon?

Last Answer : Resonance.

Description : The apparent change in frequency or pitch because of motion is explained by what effect?

Last Answer : The Doppler effect.