How will an iris that has portions along both the "a" and "b" dimension walls act at the resonant frequency?

How will an iris that has portions along both the "a" and  "b" dimension walls act at the resonant frequency?
by

1 Answer

Answer :

As a shunt resistance.
by

Related questions

An iris placed along the "b" dimension wall produces what kind of reactance?

Description : An iris placed along the "b" dimension wall produces what kind of reactance?

Last Answer : Inductive.

Which of the following statements is not true with respect to microwaves? (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz. (B) Propagation is line-of-sight. (C) Very high-frequency waves cannot penetrate walls. (D) Use of certain portions of the band requires permission from authorities.

Description : Which of the following statements is not true with respect to microwaves? (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz. (B) Propagation is line-of-sight. (C) Very ... waves cannot penetrate walls. (D) Use of certain portions of the band requires permission from authorities.

Last Answer : (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz.

The resonant frequency of electron wobble can be changed by variation of what force?

Description : The resonant frequency of electron wobble can be changed by variation of what force?

Last Answer : The applied magnetic field.

What two variables determine the primary frequency of a resonant cavity?

Description : What two variables determine the primary frequency of a resonant cavity?

Last Answer : Size and shape of the cavity.

If the inductor and capacitor values are increased, what happens to the resonant frequency?

Description : If the inductor and capacitor values are increased, what happens to the resonant frequency?

Last Answer : Decreases.

What is the impedance of a crystal at its resonant frequency when it is used in the series mode?

Description : What is the impedance of a crystal at its resonant frequency when it is used in the series mode?

Last Answer : Minimum.

What is the impedance of a crystal at its resonant frequency when it is used in the parallel mode?

Description : What is the impedance of a crystal at its resonant frequency when it is used in the parallel mode?

Last Answer : Maximum

What equipment uses a calibrated resonant circuit to measure frequency?

Description : What equipment uses a calibrated resonant circuit to measure frequency?

Last Answer : Wavemeter.

When the frequency is decreased so that two quarter wavelengths are longer than the "a" (wide) dimension of the waveguide, what will happen?

Description : When the frequency is decreased so that two quarter wavelengths are longer than the "a" (wide) dimension of the waveguide, what will happen?

Last Answer : Energy will no longer pass through the waveguide.

in a directional coupler that is designed to sample the incident energy, what happens to the two portions of the wavefront when they arrive at the pickup probe?

Description : in a directional coupler that is designed to sample the incident energy, what happens to the two portions of the wavefront when they arrive at the pickup probe?

Last Answer : The wavefront portions add.

When a wavefront is radiated into a waveguide, what happens to the portions of the wavefront that do not satisfy the boundary conditions?

Description : When a wavefront is radiated into a waveguide, what happens to the portions of the wavefront that do not satisfy the boundary conditions?

Last Answer : Decrease to zero.

How can a series-positive limiter be modified to limit unwanted negative portions of the input signal?

Description : How can a series-positive limiter be modified to limit unwanted negative portions of the input signal?

Last Answer : Biasing.

Inductive tuning of a resonant cavity is accomplished by placing a nonmagnetic slug in what area?

Description : Inductive tuning of a resonant cavity is accomplished by placing a nonmagnetic slug in what area?

Last Answer : The area of maximum H lines.

What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?

Description : What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?

Last Answer : Bandwidth of the circuit

In a parallel-resonant circuit, what is the relationship between impedance and current?

Description : In a parallel-resonant circuit, what is the relationship between impedance and current?

Last Answer : Maximum impedance, minimum current.

. In an "ideal" resonant circuit, what is the relationship between impedance and current?

Description : . In an "ideal" resonant circuit, what is the relationship between impedance and current?

Last Answer : Impedance low Current high.

. A non-resonant line is a line that has no standing waves of current and voltage on it and is considered to be flat. Why is this true?

Description : . A non-resonant line is a line that has no standing waves of current and voltage on it and is considered to be flat. Why is this true?

Last Answer : The load impedance of such a line is equal to Z0.

Without strapping, the resonant cavities of a hole-and-slot anode are connected in what manner?

Description : Without strapping, the resonant cavities of a hole-and-slot anode are connected in what manner?

Last Answer : Series.

A cylindrical copper block with resonant cavities around the circumference is used as what component of a magnetron?

Description : A cylindrical copper block with resonant cavities around the circumference is used as what component of a magnetron?

Last Answer : Anode or plate

A resonant system has a fundamental frequency of 100 Hz. If the next higher frequency that gives a resonance are 300 Hz and 500 Hz, the system could be (a) A pip open at both ends (b) A pipe closed at both ends (c) A string vibrating between two fixed points (d) A pipe open at one end and closed at the other

Description : A resonant system has a fundamental frequency of 100 Hz. If the next higher frequency that gives a resonance are 300 Hz and 500 Hz, the system could be (a) A pip open at both ends (b) A pipe ... (c) A string vibrating between two fixed points (d) A pipe open at one end and closed at the other

Last Answer : Ans:(d)

What is Resonant Frequency?

Description : What is Resonant Frequency?

Last Answer : Answer: The frequency at which resonant peak occurs is called the resonant frequency. Resonance frequency explains about the speed of the transient response.

Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Description : Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Last Answer : A. adding a capacitor in series and reducing the physical length

The effect of adding parasitic elements of a Hertz dipole is to A. make the antenna more omnidirectional B. reduce its resonant frequency C. increase the antenna’s power gain D. All of these

Description : The effect of adding parasitic elements of a Hertz dipole is to A. make the antenna more omnidirectional B. reduce its resonant frequency C. increase the antenna’s power gain D. All of these

Last Answer : C. increase the antenna’s power gain

When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Description : When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Last Answer : D. Antenna resonant frequency increases

What is the effect of adding a capacitor in series with an antenna? A. The antenna’s resonant frequency will increase B. The antenna’s resonant frequency will decrease C. The antenna will be physically 5% longer than its electrical length D. A capacitor is never added in series with an antenna

Description : What is the effect of adding a capacitor in series with an antenna? A. The antenna’s resonant frequency will increase B. The antenna’s resonant frequency will decrease C. The antenna will be physically 5% longer than its electrical length D. A capacitor is never added in series with an antenna

Last Answer : A. The antenna’s resonant frequency will increase

If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease

Description : If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease

Last Answer : D. decrease

If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its resonant frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.

Description : If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its ... frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.

Last Answer : C. its resonant frequency will be increased

How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna

Description : How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna

Last Answer : D. By connecting an inductor in series with the antenna

Determine the lower half-power frequency of a class-C amplifier having upper half-power frequency of 10.025 MHz, a resonant frequency 5 MHz and a circuit Q of 10. A. 1.0025 MHz B. 10.525 MHz C. 0.5 MHz D. 10 MHz

Description : Determine the lower half-power frequency of a class-C amplifier having upper half-power frequency of 10.025 MHz, a resonant frequency 5 MHz and a circuit Q of 10. A. 1.0025 MHz B. 10.525 MHz C. 0.5 MHz D. 10 MHz

Last Answer : A. 1.0025 MHz

Highest theoretical frequency that can be processed at a sampling rate without aliasing. A. Folding frequency B. Resonant frequency C. Natural frequency D. Critical frequency

Description : Highest theoretical frequency that can be processed at a sampling rate without aliasing. A. Folding frequency B. Resonant frequency C. Natural frequency D. Critical frequency

Last Answer : A. Folding frequency

Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Description : Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Last Answer : C. resistive load at the resonant frequency

The frequency at which maximum amplitude ratio is attained is called the __________ frequency. (A) Corner (B) Resonant (C) Cross-over (D) Natural

Description : The frequency at which maximum amplitude ratio is attained is called the __________ frequency. (A) Corner (B) Resonant (C) Cross-over (D) Natural

Last Answer : (B) Resonant

The two resonant frequency ratio (ω/ ω2) in a dynamic vibration absorber system for a mass ratio 0.2 are given by A) 0 ; 1.0 B) 0.801 ; 1.248 C) 0.458 ; 1.124 D) 0.642 ; 1.558

Description : The two resonant frequency ratio (ω/ ω2) in a dynamic vibration absorber system for a mass ratio 0.2 are given by A) 0 ; 1.0 B) 0.801 ; 1.248 C) 0.458 ; 1.124 D) 0.642 ; 1.558

Last Answer : B) 0.801 ; 1.248

In the case of steady state forced vibration at a resonance, the amplitude of vibration is A) Inversely proportional to damping coefficient B) Inversely proportional to damping ratio C) Inversely proportional to resonant frequency D) Directly proportional to resonant frequency

Description : In the case of steady state forced vibration at a resonance, the amplitude of vibration is A) Inversely proportional to damping coefficient B) Inversely proportional to damping ratio C) Inversely proportional to resonant frequency D) Directly proportional to resonant frequency

Last Answer : B) Inversely proportional to damping ratio

How is the Resonant Peak (Mr), resonant frequency (ωr), and band width determined from Nichols chart?

Description : How is the Resonant Peak (Mr), resonant frequency (ωr), and band width determined from Nichols chart?

Last Answer : i) The resonant peak is given by the value of ω contour which is tangent to G(j ω ii) The resonant frequency is given by the frequency of G(jω iii) The bandwidth is given by frequency corresponding to the intersection point of G(jω – 3dB M-contour.

Define –Resonant frequency

Description : Define –Resonant frequency

Last Answer : The frequency at which resonant peak occurs is called resonant frequency.

An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

Derive an expression for resonant frequency of series RLC circuit.

Description : Derive an expression for resonant frequency of series RLC circuit.

Last Answer : At resonance frequency in RLC series circuit, we have inductive reactance is equal to capacitive reactance i.e.  Where fr is the resonant frequency in RLC series circuit. 

What is the natural resonant frequency?

Description : What is the natural resonant frequency?

Last Answer : The frequency at which capacitive reactance is equal to inductive reactance.

In a series RLC circuit operating below the resonant frequency the current

Description : In a series RLC circuit operating below the resonant frequency the current  (a) I leads Vs (b) I lags Vs (c) I is in Phase with Vs (d) None of these

Last Answer : In a series RLC circuit operating below the resonant frequency the current  I leads Vs 

A tuned circuit has a Q of 100 at its resonant frequency of 500 kHz. Its bandwidth is _____kHz.

Description : A tuned circuit has a Q of 100 at its resonant frequency of 500 kHz. Its bandwidth is _____kHz. (A) 50000 (B) 0.2 (C) 600 (D) 5

Last Answer : A tuned circuit has a Q of 100 at its resonant frequency of 500 kHz. Its bandwidth is 5 kHz.

A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are

Description : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is

Last Answer : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is 500 Hz

The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : -

Description : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - a) 225 MHz b) 1.06 MHz c) 10 KHz d) 10 MHz

Last Answer : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - 10 KHz

In a series RLC circuit that is operating above the resonant frequency, the current : -

Description : In a series RLC circuit that is operating above the resonant frequency, the current : -  a) lags the applied voltage b) leads the applied voltage c) is in phase with the applied voltage d) is zero

Last Answer : In a series RLC circuit that is operating above the resonant frequency, the current : - lags the applied voltage

A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C...

Description : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is:  (1) 25 (2) 50 (3) 100 (4) 200

Last Answer : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is: 200.

In a series L-C circuit at the resonant frequency the?

Description : In a series L-C circuit at the resonant frequency the?

Last Answer : In a series L-C circuit at the resonant frequency the current is maximum.

In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

Description : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

Last Answer : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of L or C.

The number of half-wave patterns in the "b" dimension of rectangular waveguides is indicated by which of the two descriptive subscripts?

Description : The number of half-wave patterns in the "b" dimension of rectangular waveguides is indicated by which of the two descriptive subscripts?

Last Answer : Second.

The electric field is perpendicular to the "a" dimension of a waveguide in what mode?

Description : The electric field is perpendicular to the "a" dimension of a waveguide in what mode?

Last Answer : TE.