At what point on an open-circuited rf line do voltage peaks occur?

At what point on an open-circuited rf line do voltage peaks  occur?
by

1 Answer

Answer :

At 1/2 wavelength from the end and at every 1/2 wavelength  along the line
by

Related questions

The phenomenon qf rise in voltage at the receiving end of the open-circuited or lightly loaded line is called the (a) Seeback effect (b) Ferranti effect (c) Raman effect (d) none of the above

Description : The phenomenon qf rise in voltage at the receiving end of the open-circuited or lightly loaded line is called the (a) Seeback effect (b) Ferranti effect (c) Raman effect (d) none of the above

Last Answer : (b) Ferranti effect

The phenomenon qf rise in voltage at the receiving end of the open-circuited or lightly loaded line is called the (a) Seeback effect (b) Ferranti effect (c) Raman effect (d) none of the above

Description : The phenomenon qf rise in voltage at the receiving end of the open-circuited or lightly loaded line is called the (a) Seeback effect (b) Ferranti effect (c) Raman effect (d) none of the above

Last Answer : (b) Ferranti effect

Extrinsic (OH) absorption peaks define three regions or windows of preferred operation. List the three windows of operation.

Description : Extrinsic (OH) absorption peaks define three regions or windows of preferred operation. List the three windows of operation.

Last Answer : The first, second, and third windows of operation are 850 nm, 1300 nm, and 1550 nm, respectively.

The reflection coefficient of a short-circuited line for voltage is:

Description : The reflection coefficient of a short-circuited line for voltage is: A) -1 B) +1 C) 0.5 D) zero

Last Answer : The reflection coefficient of a short-circuited line for voltage is: -1

The reflection co-efficient at the open circuited end of a transmission line. (a) zero (b) infinity (c) unity (d) none of the above

Description : The reflection co-efficient at the open circuited end of a transmission line. (a) zero (b) infinity (c) unity (d) none of the above

Last Answer : (c) unity

Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Description : Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Last Answer : c. liable to radiate

Impedance inversionmaybe obtainedwith a. a short-circuited stub b. an open-circuited stub c. a quarter-wave line d. a half-wave line

Description : Impedance inversionmaybe obtainedwith a. a short-circuited stub b. an open-circuited stub c. a quarter-wave line d. a half-wave line

Last Answer : c. a quarter-wave line

A quarter wave line open circuited at far end behaves as:

Description : A quarter wave line open circuited at far end behaves as:  (1) Inductance (2) L and C in parallel (3) Capacitance (4) L and C in series

Last Answer : A quarter wave line open circuited at far end behaves as: L and C in series.

Arrange the following Himalayan peaks in order as they occur from west to east: 1. Kanchenjunga 2. Mt. Everest 3. Nanda Devi 4. Dhaulagiri (a) I, II, III, IV (b) I, II, IV, III (c) III, II, I, IV (d) III, IV, II, I

Description : Arrange the following Himalayan peaks in order as they occur from west to east: 1. Kanchenjunga 2. Mt. Everest 3. Nanda Devi 4. Dhaulagiri (a) I, II, III, IV (b) I, II, IV, III (c) III, II, I, IV (d) III, IV, II, I

Last Answer : Ans: (d)

Which one of the following statements about the mass spectrum of CH3Br is correct? a. the last two peaks are of equal size and occur at m/z values of 94 and 96 b. the last two peaks have abundances in the ratio 3:1 and occur at m/z values of 94 and 96 c. there is just one peak for the molecular ion with an m/z value of 95 d. there is just one peak for the molecular ion with an m/z value of 44

Description : Which one of the following statements about the mass spectrum of CH3Br is correct? a. the last two peaks are of equal size and occur at m/z values of 94 and 96 b. the last two peaks have abundances in the ... m/z value of 95 d. there is just one peak for the molecular ion with an m/z value of 44

Last Answer : a. the last two peaks are of equal size and occur at m/z values of 94 and 96

What two methods are used to compensate for the problems that cause low gain in an rf amplifier?

Description : What two methods are used to compensate for the problems that cause low gain in an rf amplifier?

Last Answer : . RF transformers are used and the transistor is neutralized.

What problem is caused in an rf amplifier by a loosely coupled transformer?

Description : What problem is caused in an rf amplifier by a loosely coupled transformer?

Last Answer : A too-narrow bandpass.

What is the most common form of coupling for an rf amplifier?

Description : What is the most common form of coupling for an rf amplifier?

Last Answer : Transformer coupling.

Can a parallel LC circuit be used as the frequency determining network for an rf amplifier?

Description : Can a parallel LC circuit be used as the frequency determining network for an rf amplifier?

Last Answer : Yes.

What is the purpose of a frequency-determining network in an rf amplifier?

Description : What is the purpose of a frequency-determining network in an rf amplifier?

Last Answer : To provide maximum impedance at the desired frequency.

If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Description : If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Last Answer : A step-down transformer.

What is the result of pulsing a pulsed rf amplifier when no rf is present?

Description : What is the result of pulsing a pulsed rf amplifier when no rf is present?

Last Answer : Oscillations at an undesired frequency.

The Doppler effect causes a change in what aspect of rf energy that strikes a moving object?

Description : The Doppler effect causes a change in what aspect of rf energy that strikes a moving object?

Last Answer : Frequency.

Rotation of an rf-feed source to produce a conical scan pattern is identified by what term?

Description : Rotation of an rf-feed source to produce a conical scan pattern is identified by what term?

Last Answer : Nutation.

Atmospheric interference with the travel of electromagnetic energy increases with what rf energy characteristic?

Description : Atmospheric interference with the travel of electromagnetic energy increases with what rf energy characteristic?

Last Answer : Frequency.

If the rf amplifier discussed has an 80 milliwatt input, what would be the maximum output?

Description : If the rf amplifier discussed has an 80 milliwatt input, what would be the maximum output?

Last Answer : 800 watts.

What is the most common method of testing a fixed rf attenuator?

Description : What is the most common method of testing a fixed rf attenuator?

Last Answer : Rf substitution method.

Normally, how are high-power rf tubes tested?

Description : Normally, how are high-power rf tubes tested?

Last Answer : In their circuit.

Name the three main sections of a typical rf signal generator.

Description : Name the three main sections of a typical rf signal generator.

Last Answer : Oscillator circuit, modulator, and output control circuit.

If a wave's electric lines of force rotate through 360 degrees with every cycle of rf energy, what is the polarization of this wave?

Description : If a wave's electric lines of force rotate through 360 degrees with every cycle of rf energy, what is the polarization of this wave?

Last Answer : Circular polarization.

How does the reactance-tube modulator impress intelligence onto an rf carrier?

Description : How does the reactance-tube modulator impress intelligence onto an rf carrier?

Last Answer : By changing the reactance of an oscillator circuit in consonance with the modulating voltage.

For what class of operation is the final rf power amplifier of a plate-modulator circuit biased?

Description : For what class of operation is the final rf power amplifier of a plate-modulator circuit biased?

Last Answer : Class C

66 While conducting short-circuit test on a transformer the following side is short circuited A. High voltage side B. low voltage side C. primary side D. secondary side

Description : 66 While conducting short-circuit test on a transformer the following side is short circuited A. High voltage side B. low voltage side C. primary side D. secondary side

Last Answer : B. Low voltage side

30 In performing the short circuit test of a transformer A. high voltage is usually short circuited B. low voltage side is usually short circuited C. any side is short circuited with preference D. none of the above

Description : 30 In performing the short circuit test of a transformer A. high voltage is usually short circuited B. low voltage side is usually short circuited C. any side is short circuited with preference D. none of the above

Last Answer : B. Low voltage side is usually short circuited

On an open-ended transmission line, the voltage is always zero at what distance from each end of the line?

Description : On an open-ended transmission line, the voltage is always zero at what distance from each end of the line?

Last Answer : One-fourth the distance from each end of the line.

Booster transformer should never: a) Have fuse in the HV winding b) Be left open circuited c) Be left closed circuited d) None of the above

Description : Booster transformer should never: a) Have fuse in the HV winding b) Be left open circuited c) Be left closed circuited d) None of the above

Last Answer : Ans: B

Why CT should not be open circuited?

Description : Why CT should not be open circuited?

Last Answer : Very high voltage will be induced in secondary due to less back emf resulting in the failure of the insulation. 

The standing wave ratio of short circuited and open circuited lines will be a) 0 b) 1 c) -1 d) ∞

Description : The standing wave ratio of short circuited and open circuited lines will be a) 0 b) 1 c) -1 d) ∞

Last Answer : d) ∞

If the field circuits of an unloaded salient pole synchronous motor gets suddenly open circuited, then (A) The motor stops. (B) It continues to run at the same speed. (C) Its runs at the slower speed. (D) It runs at a very high speed.

Description : If the field circuits of an unloaded salient pole synchronous motor gets suddenly open circuited, then (A) The motor stops. (B) It continues to run at the same speed. (C) Its runs at the slower speed. (D) It runs at a very high speed.

Last Answer : Ans: B The motor continues to run at the same speed because synchronous motor speed does not depend upon load, Nα f.

A 220/440 V, 50 Hz, 5 KVA, single phase transformer operates on 220V, 40Hz supply with secondary winding open circuited. Then (A) Both eddy current and hysteresis losses decreases. (B) Both eddy current and hysteresis losses increases. (C) Eddy current loss remains the same but hysteresis loss increases. (D) Eddy current loss increases but hysteresis loss remains the same.

Description : A 220/440 V, 50 Hz, 5 KVA, single phase transformer operates on 220V, 40Hz supply with secondary winding open circuited. Then (A) Both eddy current and hysteresis losses decreases. (B) Both ... same but hysteresis loss increases. (D) Eddy current loss increases but hysteresis loss remains the same.

Last Answer : (A) Both eddy current and hysteresis losses decreases.

Explain standing waves with load terminal open circuited and short circuited.

Description : Explain standing waves with load terminal open circuited and short circuited. 

Last Answer : Standing waves with load terminal open circuited   Standing waves: The forward and reflected waves on the incorrectly terminated transmission line produce an interference pattern known as Standing ... , the load impedance will not be equal to the transmission line (characteristic)impedence.

Open circuited armature coil of a D.C. machine is?

Last Answer : Open circuited armature coil of a D.C. machine is identified by the scarring of the commutator segment to which open circuited coil is connected and indicated by a spark completely around the commutator.

If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will?

Last Answer : If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will stop.

When secondary of a current transformer is open-circuited its iron core will be?

Description : When secondary of a current transformer is open-circuited its iron core will be?

Last Answer : When secondary of a current transformer is open-circuited its iron core will be hot because of heavy iron losses taking place in it due to high flux density.

Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections B. Power supply voltage changes C. Loose connections in the oscillator, amplifier, or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Description : Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections ... , or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Last Answer : D. DC and RF heating of resistors, causing then to change values.

In an AM transmitter with 100% modulation, the voltage of the final RF stage will be

Description : In an AM transmitter with 100% modulation, the voltage of the final RF stage will be

Last Answer : approximately four times the DC supply voltage

In a Klystron amplifier, the RF voltage produces

Description : In a Klystron amplifier, the RF voltage produces  (a) amplitude modulation (b) frequency modulation (c) phase modulation (d) velocity modulation

Last Answer : In a Klystron amplifier, the RF voltage produces velocity modulation

The input impedance of a short circuited loss less transmission line of characteristic impedance 50 Ohm is

Description : The input impedance of a short circuited loss less transmission line of characteristic impedance 50 Ohm is

Last Answer : Capacitive

Why is the physical length of a coaxial cable transmission line shorter than its electrical length?A. Skin effect is less pronounced in the coaxial cable B. RF energy moves slower along the coaxial cable C. The surge impedance is higher in the parallel feed line D. The characteristic impedance is higher in the parallel feed line

Description : Why is the physical length of a coaxial cable transmission line shorter than its electrical length? A. Skin effect is less pronounced in the coaxial cable B. RF energy moves slower along the ... higher in the parallel feed line D. The characteristic impedance is higher in the parallel feed line

Last Answer : B. RF energy moves slower along the coaxial cable

How can the loss of timing occur in NRZ line coding?

Description : How can the loss of timing occur in NRZ line coding?

Last Answer : If long strings of 1s or 0s are present causing a lack of level transitions.

Mention the important mountains and peaks of Antarctica. -Geography

Description : Mention the important mountains and peaks of Antarctica. -Geography

Last Answer : The Trans-Antarctic mountain crosses the entire continent. Vinson Massif’ the highest peak in Antarctica is located in the Ellsworth mountains. Mt. Erebus, Antarctica’s most active volcano, is on the Ross Island. Another one is Prince Charles mountain.

Mention the names of important mountains and peaks in Europe. -Geography

Description : Mention the names of important mountains and peaks in Europe. -Geography

Last Answer : 1. Goldho Piggen (2469 m) in Norway is the highest peak in Northern Europe. The Ben Nevis (1343 m) in Scotland and Snowdon (1085 m) in Wales are the other peaks. 2. They are also known as the ... form the boundary between France and Spain. 3. Mount Blanc is the highest peak (4807 m) in the Alps.

Name the world’s first and second highest mountain peaks. -SST 10th

Description : Name the world’s first and second highest mountain peaks. -SST 10th

Last Answer : First highest Mount Everest, second highest Peak Mt. K2.