What type of diode has orange, blue, and gray bands?

1 Answer

Answer :

1N368.

Related questions

Description : A resistor is handed to you for identification with the following color code: the first band is blue, followed by gray, green, gold, and brown. What is the resistor’s value?

Last Answer : 6,800,000 ohms (6.8 mega ohms), with 5% tolerance, and a 1% reliability level.

Description : What happens when you mix orange and gray?

Last Answer : Need answer

Description : The sequence of bands marked on a carbon resistor is yellow , red orange and silver. What is its (a) resistance and (b) tolerance ?

Last Answer : The sequence of bands marked on a carbon resistor is yellow , red orange and silver. What is its (a) resistance and (b) tolerance ?

Description : The resistance value of a carbon resistor having Orange, Red, Brown and Golden color bands is

Last Answer : The resistance value of a carbon resistor having Orange, Red, Brown and Golden color bands is 320 Ω ± 5%

Description : Which radio frequency bands use the tropospheric scattering principle for propagation of radio waves?

Last Answer : Vhf and above

Description : A carbon resistor has the following color bands: The first band is yellow, followed by violet, yellow, and silver. What is the ohmic value of the resistor?

Last Answer : 470,000 ohms (470 kilo ohms).

Description : A carbon resistor has a resistance of 50 ohms, and a tolerance of 5 percent. What are the colors of bands one, two, three, and four, respectively?

Last Answer : The bands are green, black, black, and gold.

Description : In the tunnel diode, the tunneling current is at what level when the forbidden gap of the N-type material is at the same energy level as the empty states of the P-type material?

Last Answer : Minimum.

Description : What is the name of the simplest type of rectifier which uses one diode?

Last Answer : The half-wave rectifier.

Description : What type of bias makes a diode act as a closed switch?

Last Answer : Forward bias.

Description : What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Last Answer : Point-contact.

Description : I can't charge HTC, only the orange LED on the cable flashes.

Last Answer : Need Answer

Description : Which would you prefer? Black, gray or navy blue for a mens wool coat?

Last Answer : Oxford Gray, goes with any other color including brown and it is less likely to show soil spots! Besides it is my favorite.

Description : On ESPN.com, the box score for the Nats/Mets game is blue, but everything else is gray. Why is this?

Last Answer : wondering the same thing!

Description : what are the blue gray bugs with purple legs on my squash plants.?

Last Answer : I agree - squash bugs. You need to get rid of them ASAP or you'll lose your plants. I'm a diehard organic gardener but squash bugs are the one thing that will make me break down and dust ... Sevin Dust. I hate the stuff with a passion but usually, one application is all it takes, thank heavens.

Description : How go I get rid of a disease that looks like a gray fungus on colorado blue spruce trees?

Last Answer : Need Answer

Description : Pronounced as one letter, And written with three, Two letters there are, And two only in me. I'm double, I'm single, I'm black, blue, and gray, I'm read from both ends, And the same either way. What am I? -Riddles

Last Answer : An eye.

Description : If you saw a picture of earths surface as seen from above in which water looked black forests looked red and cities looked blue-gray you are probably looking at a?

Last Answer : Feel Free to Answer

Description : The minimum resistance value for a blue, gray, red, silver resistor is? A.612 ohms B.6,120 ohms C.6,800 ohms D.6,460 ohms

Last Answer : The minimum resistance value for a blue, gray, red, silver resistor is? A.612 ohms B.6,120 ohms C.6,800 ohms D.6,460 ohms

Description : What is the relative length of the time constant for the diode capacitor combination in a damper (long or short)?

Last Answer : Short time constant.

Description : What is the condition of the diode in a series limiter when an output is developed? In a parallel limiter?

Last Answer : Conducting, cutoff.

Description : Why is electron flow with the arrow in the symbol of a Zener diode instead of against the arrow as it is in a normal diode?

Last Answer : Because Zener diodes are operated in the reverse bias mode.

Description : During avalanche effect breakdown, what limits current flow through the diode?

Last Answer : an external current-limiting resistor

Description : What is the doping level of an avalanche effect diode when compared to the doping level of a Zener-effect diode?

Last Answer : The doping level of an avalanche effect diode is lower.

Description : When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Last Answer : The diode is open or has a high-forward resistance.

Description : What is the greatest threat to a diode?

Last Answer : Heat.

Description : What is meant by diode ratings?

Last Answer : They are the limiting values of operating conditions outside which operations could cause diode damage.

Description : What is used to show how diode parameters vary over a full operating range?

Last Answer : A characteristic curve.

Description : In reference to the schematic symbol for a diode, do electrons flow toward or away from the arrow?

Last Answer : Toward the arrow.

Description : What is the purpose of a PN junction diode?

Last Answer : To convert alternating current into direct current

Description : For a diode to act as a rectifier, should it be connected in series or parallel with the load?

Last Answer : Series.

Description : What term is used to describe the period when the diode is not conducting?

Last Answer : Cutoff.

Description : Describe the output of a laser diode.

Last Answer : The LD's output has a narrow spectral width and small output beam angle.

Description : Why would a laser diode be used in a low-data-rate digital application?

Last Answer : When extremely high transmitter output powers are required.

Description : Is the drive circuitry generally more complex for an LED or a laser diode? Why?

Last Answer : For a laser diode. The laser diode transmitter generally contains output power control circuitry and may contain a TE cooler and some circuitry associated with the TE cooler.

Description : What is the typical back-to-forward resistance ratio of a good-quality diode?

Last Answer : 10-to-1 ratio.

Description : At frequencies above 100 megahertz, the intrinsic (i) region causes a pin diode to act as what?

Last Answer : Variable resistance.

Description : What are the most important advantages of the Schottky barrier diode?

Last Answer : Lower forward resistance and low noise.

Description : What is the capacitive reactance across a point-contact diode as compared to a normal junction diode?

Last Answer : Lower.

Description : During the manufacture of a point-contact diode, what is the purpose of passing a relatively large current from the catwhisker to the silicon crystal?

Last Answer : . To form a small region of p-type material

Description : What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

Last Answer : The negative-resistance property.

Description : What is the junction arrangement of the original avalanche transit-time diode?

Last Answer : Pnin.

Description : What limits the usefulness of high-gain, tunnel-diode frequency converters?

Last Answer : Stability problems.

Description : What is the purpose of the circulator in a tunnel-diode amplifier?

Last Answer : Prevent feedback to the tuned input circuit.

Description : Why is the tunnel diode loosely coupled to the cavity in a tunnel-diode oscillator?

Last Answer : To increase the stability.

Description : The pin diode is primarily used for what purpose?

Last Answer : A switching device.

Description : What determines the frequency of a tunnel-diode oscillator?

Last Answer : The tuned circuit or cavity frequency.

Description : What is the primary difference between a diode and a triode?

Last Answer : The triode contains a third element called the control rid.

Description : A large negative voltage is applied to the plate of a diode, and a largewhat tube parameter has been exceeded?

Last Answer : Peak Inverse Voltage (PIV).

Description : An ac voltage is applied across a diode. The tube will conduct when

Last Answer : Positive.