. What will be the output of a half adder when both inputs are 1s?

. What will be the output of a half adder when both inputs are  1s?
by

1 Answer

Answer :

Sum equals 0 with a carry of 1.
by

Related questions

A full adder logic circuit will have (A) Two inputs and one output. (B) Three inputs and three outputs. (C) Two inputs and two outputs. (D) Three inputs and two outputs.

Description : A full adder logic circuit will have (A) Two inputs and one output. (B) Three inputs and three outputs. (C) Two inputs and two outputs. (D) Three inputs and two outputs.

Last Answer : Ans: D A full adder circuit will add two bits and it will also accounts the carry input generated in the previous stage. Thus three inputs and two outputs (Sum and Carry) are there.

What advantage does a half adder have over a quarter adder?

Description : What advantage does a half adder have over a quarter adder?

Last Answer : The half adder generates a carry.

. What will be the output of an X-NOR gate when both inputs are LOW?

Description : . What will be the output of an X-NOR gate when both inputs are LOW?

Last Answer : HIGH.

What will be the output of an X-OR gate when both inputs are HIGH?

Description : What will be the output of an X-OR gate when both inputs are HIGH?

Last Answer : Low (0)

What will be the output of a NOR gate when both inputs are HIGH?

Description : What will be the output of a NOR gate when both inputs are HIGH?

Last Answer : Low.

For an R-S FF to change output conditions, the inputs must be in what states?

Description : For an R-S FF to change output conditions, the inputs must be in what states?

Last Answer : 1 and 0, or opposite states.

With the inputs shown below, what will be the output of S1, S2, and C2?

Description : With the inputs shown below, what will be the output of S1, S2, and C2?

Last Answer : MSD of the sum.

A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Description : A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Last Answer : . One or the other of the inputs must be HIGH, but not both at the same time.

What is the output Boolean expression for an AND gate with A and B as inputs when the B input is inverted?

Description : What is the output Boolean expression for an AND gate with A and B as inputs when the B input is inverted?

Last Answer : AB

In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Description : In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Last Answer : All inputs must be low.

What is the output Boolean expression for a NOR gate with R and T as inputs?

Description : What is the output Boolean expression for a NOR gate with R and T as inputs?

Last Answer : (R +T)’

A NAND gate has inputs labeled as A, B, and C. If A and B are HIGH, C must be at what logic level to produce a HIGH output?

Description : A NAND gate has inputs labeled as A, B, and C. If A and B are HIGH, C must be at what logic level to produce a HIGH output?

Last Answer : . Low.

What is the output Boolean expression for a NAND gate with inputs A, B, and C?

Description : What is the output Boolean expression for a NAND gate with inputs A, B, and C?

Last Answer : C B A

What must be the state of the inputs to a NAND gate in order to produce a LOW output?

Description : What must be the state of the inputs to a NAND gate in order to produce a LOW output?

Last Answer : All inputs must be HIGH.

A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW? A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW?

Description : A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW?

Last Answer : HIGH.

What is the Boolean expression for the output of an AND gate that has R and S as inputs?

Description : What is the Boolean expression for the output of an AND gate that has R and S as inputs?

Last Answer : f = RS.

What type of logic gates are added to a parallel adder to enable it to subtract?

Description : What type of logic gates are added to a parallel adder to enable it to subtract?

Last Answer : X-OR gates.

What type of adder is used to handle a carry from a previous circuit?

Description : What type of adder is used to handle a carry from a previous circuit?

Last Answer : Full adder.

An X-OR gate may be used as what type of adder?

Description : An X-OR gate may be used as what type of adder?

Last Answer : Quarter adder.

What is the difference between a summing amplifier and an adder circuit?

Description : What is the difference between a summing amplifier and an adder circuit?

Last Answer : The adder simply adds the input signals together while the summing amplifier multiplies the sum of the input signals by the gain of circuit.

The size of the ROM required to build an 8-bit adder/subtractor with mode control, carry input, carry output and two’s complement overflow output is given as

Description : The size of the ROM required to build an 8-bit adder/subtractor with mode control, carry input, carry output and two’s complement overflow output is given as

Last Answer : (B) 218 × 10

Consider a full-adder with the following input values: (a) x=1, y=0 and Ci(carry input) = 0 (b) x=0, y=1 and Ci = 1 Compute the values of S(sum) and C0 (carry output) for the above input values. (A) S=1 , C0= 0 and S=0 , C0= 1 (B) S=0 , C0= 0 and S=1 , C0= 1 (C) S=1 , C0= 1 and S=0 , C0= 0 (D) S=0 , C0= 1 and S=1 , C0= 0

Description : Consider a full-adder with the following input values: (a) x=1, y=0 and Ci(carry input) = 0 (b) x=0, y=1 and Ci = 1 Compute the values of S(sum) and C0 (carry output) for the above input values. (A) S=1 , C0= 0 and ... C0= 1 (C) S=1 , C0= 1 and S=0 , C0= 0 (D) S=0 , C0= 1 and S=1 , C0= 0

Last Answer : (A) S=1 , C0= 0 and S=0 , C0= 1

Describe how Op-Amp is used as adder using circuit diagram and output voltage equation.

Description : Describe how Op-Amp is used as adder using circuit diagram and output voltage equation.

Last Answer : Summing Amplifier Circuit In this simple summing amplifier circuit, the output voltage, ( Vout ) now becomes proportional to the sum of the input voltages, V1, V2, V3, etc. Then we can ... to the non-inverting input of the op-amp, it will produce the positive sum of the input voltages.

Define Half adder and full adder

Description : Define Half adder and full adder

Last Answer : The logic circuit that performs the addition of two bits is a half adder. The circuit that performs the addition of three bits is a full adder.

Define half adder and full adder

Description : Define half adder and full adder

Last Answer : The logic circuit that performs the addition of two bits is a half adder. The circuit that performs the addition of three bits is a full adder.

The gates required to build a half adder are (A) EX-OR gate and NOR gate (B) EX-OR gate and OR gate (C) EX-OR gate and AND gate (D) Four NAND gates.

Description : The gates required to build a half adder are (A) EX-OR gate and NOR gate (B) EX-OR gate and OR gate (C) EX-OR gate and AND gate (D) Four NAND gates.

Last Answer : (C) EX-OR gate and AND gate

The BCD adder to add two decimal digits needs minimum of (A) 6 full adders and 2 half adders (B) 5 full adders and 3 half adders (C) 4 full adders and 3 half adders (D) 5 full adders and 2 half adders

Description : The BCD adder to add two decimal digits needs minimum of (A) 6 full adders and 2 half adders (B) 5 full adders and 3 half adders (C) 4 full adders and 3 half adders (D) 5 full adders and 2 half adders

Last Answer : (D) 5 full adders and 2 half adders

A half adder can be constructed from

Description : A half adder can be constructed from

Last Answer : A half adder can be constructed from One XOR gate and one 'AND‘ gate with their input connected in parallel

What is the equivalent logic gate of a two-input NAND gate with both inputs inverted?

Description : What is the equivalent logic gate of a two-input NAND gate with both inputs inverted?

Last Answer : OR gate.

. In an Unsupervised learning ____________ a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given

Description : . In an Unsupervised learning ____________ a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given

Last Answer : b) Specific output values are not given

In an Unsupervised learning a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given e) Neither inputs nor outputs are given

Description : In an Unsupervised learning a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given e) Neither inputs nor outputs are given

Last Answer : b) Specific output values are not given

The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Description : The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Last Answer : (b) Both are zero

In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Description : In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Last Answer : ANSWER: Y -- AN OR CIRCUIT

The output of a 2-input NAND gate with high at both the inputs will be

Description : The output of a 2-input NAND gate with high at both the inputs will be • High • Low • High & low • None of the above.

Last Answer : The output of a 2-input NAND gate with high at both the inputs will be Low

What two inputs to a J-K FF will override the other inputs?

Description : What two inputs to a J-K FF will override the other inputs?

Last Answer : Clear (CLR) and preset (PS or PR).

What are the inputs to a D FF?

Description : What are the inputs to a D FF?

Last Answer : Clock and data

How many inputs does a T FF have?

Description : How many inputs does a T FF have?

Last Answer : One.

Can a difference amplifier have more than two inputs?

Description : Can a difference amplifier have more than two inputs?

Last Answer : No

Can a summing amplifier have more than two inputs?

Description : Can a summing amplifier have more than two inputs?

Last Answer : Yes, a summing amplifier can have as many inputs as desired.

How many inputs and outputs are possible with a differential amplifier?

Description : How many inputs and outputs are possible with a differential amplifier?

Last Answer : Two inputs, two outputs.

What are the required radar inputs for proper indicator operation?

Description : What are the required radar inputs for proper indicator operation?

Last Answer : Triggers, video, and antenna information.

What are the two inputs to an amplidyne?

Description : What are the two inputs to an amplidyne?

Last Answer : The mechanical force applied to turn the amplidyne, and the electrical input signal.

Is a full-wave rectifier output easier to filter than that of a half-wave rectifier?

Description : Is a full-wave rectifier output easier to filter than that of a half-wave rectifier?

Last Answer : Yes.

If the output of a half-wave rectifier is 50-volts peak, what is the average voltage

Description : If the output of a half-wave rectifier is 50-volts peak, what is the average voltage

Last Answer : 15.9 volts.

What is the output of a half-wave rectifier?

Description : What is the output of a half-wave rectifier?

Last Answer : A pulsating dc voltage.

Is a full-wave rectifier output easier to filter than that of a half-wave rectifier?

Description : Is a full-wave rectifier output easier to filter than that of a half-wave rectifier?

Last Answer : Yes.

If the output of a circuit needs to be a complete representation of one-half of the input signal, what class of operation is indicated?

Description : If the output of a circuit needs to be a complete representation of one-half of the input signal, what class of operation is indicated?

Last Answer : Class B operation.

What will be found in the output if two inputs of Ex-OR gate are high ?

Description : What will be found in the output if two inputs of Ex-OR gate are high ?

Last Answer : If two inputs of Ex-OR gate are high then 0 will be found in the output .

A line represents the different combinations of two variable inputs used in the production of a given amount of output.

Description : A line represents the different combinations of two variable inputs used in the production of a given amount of output.

Last Answer : Ans. Isoquant