What type of logic gates are added to a parallel adder to enable it to subtract?

What type of logic gates are added to a parallel adder to  enable it to subtract?
by

1 Answer

Answer :

X-OR gates.
by

Related questions

Circuit A is a 1-bit adder; circuit B is a 1 bit multiplier. a. Circuit A has more gates than circuit B b. Circuit B has more gates than circuit A c. Circuit A has the same number of gates as circuit B

Description : Circuit A is a 1-bit adder; circuit B is a 1 bit multiplier. a. Circuit A has more gates than circuit B b. Circuit B has more gates than circuit A c. Circuit A has the same number of gates as circuit B

Last Answer : a. Circuit A has more gates than circuit

The gates required to build a half adder are (A) EX-OR gate and NOR gate (B) EX-OR gate and OR gate (C) EX-OR gate and AND gate (D) Four NAND gates.

Description : The gates required to build a half adder are (A) EX-OR gate and NOR gate (B) EX-OR gate and OR gate (C) EX-OR gate and AND gate (D) Four NAND gates.

Last Answer : (C) EX-OR gate and AND gate

How many logic gates could be contained in lsi?

Description : How many logic gates could be contained in lsi?

Last Answer : 1,000 to 2,000.

What type of adder is used to handle a carry from a previous circuit?

Description : What type of adder is used to handle a carry from a previous circuit?

Last Answer : Full adder.

An X-OR gate may be used as what type of adder?

Description : An X-OR gate may be used as what type of adder?

Last Answer : Quarter adder.

A full adder logic circuit will have (A) Two inputs and one output. (B) Three inputs and three outputs. (C) Two inputs and two outputs. (D) Three inputs and two outputs.

Description : A full adder logic circuit will have (A) Two inputs and one output. (B) Three inputs and three outputs. (C) Two inputs and two outputs. (D) Three inputs and two outputs.

Last Answer : Ans: D A full adder circuit will add two bits and it will also accounts the carry input generated in the previous stage. Thus three inputs and two outputs (Sum and Carry) are there.

. What will be the output of a half adder when both inputs are 1s?

Description : . What will be the output of a half adder when both inputs are 1s?

Last Answer : Sum equals 0 with a carry of 1.

What advantage does a half adder have over a quarter adder?

Description : What advantage does a half adder have over a quarter adder?

Last Answer : The half adder generates a carry.

What is the difference between a summing amplifier and an adder circuit?

Description : What is the difference between a summing amplifier and an adder circuit?

Last Answer : The adder simply adds the input signals together while the summing amplifier multiplies the sum of the input signals by the gain of circuit.

The fast carry or look-ahead carry circuits found in most 4-bit parallel-adder circuits:

Description : The fast carry or look-ahead carry circuits found in most 4-bit parallel-adder circuits:  (1) Increase ripple delay (2) Add a 1 to complemented inputs (3) Reduce propagation delay (4) Determine sign and magnitude

Last Answer : The fast carry or look-ahead carry circuits found in most 4-bit parallel-adder circuits: Reduce propagation delay.

In the subtract mode, a 1 at C0 performs what portion of the R’s complemen

Description : In the subtract mode, a 1 at C0 performs what portion of the R’s complemen

Last Answer : Add 1 portion.

In the subtract mode, which portion of the problem is complemented?

Description : In the subtract mode, which portion of the problem is complemented?

Last Answer : Subtrahend.

One of the principal advantage of object oriented programming techniques over procedural programming techniques is that they enable programmers to create ______that do not need tobe changed when a new type of object is added:a) Networksb) Modulesc) Data Slatesd) None of These

Description : One of the principal advantage of object oriented programming techniques over procedural programming techniques is that they enable programmers to create ______that do not need to be changed when a new type of object is added: a) Networks b) Modules c) Data Slates d) None of These

Last Answer : b) Modules

How Many Basic Logic Gates ?

Description : How Many Basic Logic Gates ?

Last Answer : Basic Logic Gate three. OR, AND, NOT

What are the basic logic gates ?

Description : What are the basic logic gates ?

Last Answer : Basic Reasoning Gates. Namely: Or Gate , End Gate and Non Gate.

Which of the listed logic gates is considered to be a BASIC building block (basic logic gate) used in logic diagrams? A. NAND B. OR C. NOR D. All of the above.

Description : Which of the listed logic gates is considered to be a BASIC building block (basic logic gate) used in logic diagrams? A. NAND B. OR C. NOR D. All of the above.

Last Answer : Answer: B

How many types of logic gates are there?

Description : How many types of logic gates are there?  

Last Answer : a. OR gate. b. AND gate. c. NAND gate. d. NOR gate. e. Inverter gate. f. Exclusive OR gate. g. Equivalent gate. 

In register transfer which system is a sequential logic system in which flip-flops and gates are constructed: a. Digital system b. Register Cc. Data d. None

Description : In register transfer which system is a sequential logic system in which flip-flops and gates are constructed: a. Digital system b. Register Cc. Data d. None

Last Answer : a. Digital system

What are the basic digital logic gates?

Description : What are the basic digital logic gates?

Last Answer : The three basic logic gates are • AND gate • OR gate • NOT gate

The electronic circuits which implement the various logic operations are called ________ (a) Logic gates (b) Boolean algebra (c) amplifier gain (d) logic functions

Description : The electronic circuits which implement the various logic operations are called ________ (a) Logic gates (b) Boolean algebra (c) amplifier gain (d) logic functions

Last Answer : a) Logic gates

Which TTL logic gate is used for wired ANDing (A) Open collector output (B) Totem Pole (C) Tri state output (D) ECL gates

Description : Which TTL logic gate is used for wired ANDing (A) Open collector output (B) Totem Pole (C) Tri state output (D) ECL gates

Last Answer : Ans: A Open collector output.

The complete set of only those Logic Gates designated as Universal Gates is

Description : The complete set of only those Logic Gates designated as Universal Gates is  (A) NOT, OR and AND Gates (B) XNOR, NOR and NAND Gates (C) NOR and NAND Gates (D) XOR, NOR and NAND Gates

Last Answer : The complete set of only those Logic Gates designated as Universal Gates is NOR and NAND Gates

Which of the following gates can be used to realize all possible combinational logic functions?

Description : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

Last Answer : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : -

Description : A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : - a) AND or OR gates b) XOR or XNOR gates c) NOR or NAND gates d) AND or NOR gates

Last Answer : A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : - NOR or NAND gates

A single transistor can be used to build which of the following digital logic gates : -

Description : A single transistor can be used to build which of the following digital logic gates : - a) AND gates b) OR gates c) NOT gates d) NAND gates

Last Answer : a

What modification is made to the D’Arsonval meter movement to enable the meter to measure voltage?

Description : What modification is made to the D’Arsonval meter movement to enable the meter to measure voltage?

Last Answer : A multimeter (high resistance) is placed in series with the coil of the meter.

How many of these gates would be needed to add a four digit number?

Description : How many of these gates would be needed to add a four digit number?

Last Answer : Four.

What type of logic family uses diodes in the input?

Description : What type of logic family uses diodes in the input?

Last Answer : DTL (diode transistor logic).

What is an adder ?

Description : What is an adder ?

Last Answer : The cooperative circuit with which the addition is done is called adder.

Are adder omnivore?

Description : Are adder omnivore?

Last Answer : The one native poisonous British snake is the Common European viper (Vipera berus). Commonly known in Britain as the Adder, it is a carnivore.

What category are cobra lizard adder and copra called?

Description : What category are cobra lizard adder and copra called?

Last Answer : Feel Free to Answer

Define Half adder and full adder

Description : Define Half adder and full adder

Last Answer : The logic circuit that performs the addition of two bits is a half adder. The circuit that performs the addition of three bits is a full adder.

Data transfers are done using: a. Multiplexer switching b. Demultiplexer switching c. Adder switching d. Subtractor switching

Description : Data transfers are done using: a. Multiplexer switching b. Demultiplexer switching c. Adder switching d. Subtractor switching

Last Answer : a. Multiplexer switching

In RISC architecture access to registers is made as a block and register file in a particular register can be selected by using: a. Multiplexer b. Decoder c. Subtractor d. Adder

Description : In RISC architecture access to registers is made as a block and register file in a particular register can be selected by using: a. Multiplexer b. Decoder c. Subtractor d. Adder

Last Answer : b. Decoder

Define half adder and full adder

Description : Define half adder and full adder

Last Answer : The logic circuit that performs the addition of two bits is a half adder. The circuit that performs the addition of three bits is a full adder.

What is a carry look-ahead adder?

Description : What is a carry look-ahead adder?

Last Answer : The input carry needed by a stage is directly computed from carry signals obtained from all the preceding stages i-1,i-2,.....0, rather than waiting for normal carries to supply slowly from stage to stage. An adder that uses this principle is a called carry look-ahead adder.

The correction to be applied in decimal adder to the generated sum is (A) 00101 (B) 00110 (C) 01101 (D) 01010

Description : The correction to be applied in decimal adder to the generated sum is (A) 00101 (B) 00110 (C) 01101 (D) 01010

Last Answer : Ans: B The correction to be applied in decimal adder to the generated sum is 00110. When the four bit sum is more than 9 then the sum is invalid. In such cases, add +6(i.e. 0110) to the ... the six invalid states. If a carry is generated when adding 6, add the carry to the next four bit group .

The size of the ROM required to build an 8-bit adder/subtractor with mode control, carry input, carry output and two’s complement overflow output is given as

Description : The size of the ROM required to build an 8-bit adder/subtractor with mode control, carry input, carry output and two’s complement overflow output is given as

Last Answer : (B) 218 × 10

The BCD adder to add two decimal digits needs minimum of (A) 6 full adders and 2 half adders (B) 5 full adders and 3 half adders (C) 4 full adders and 3 half adders (D) 5 full adders and 2 half adders

Description : The BCD adder to add two decimal digits needs minimum of (A) 6 full adders and 2 half adders (B) 5 full adders and 3 half adders (C) 4 full adders and 3 half adders (D) 5 full adders and 2 half adders

Last Answer : (D) 5 full adders and 2 half adders

Consider a full-adder with the following input values: (a) x=1, y=0 and Ci(carry input) = 0 (b) x=0, y=1 and Ci = 1 Compute the values of S(sum) and C0 (carry output) for the above input values. (A) S=1 , C0= 0 and S=0 , C0= 1 (B) S=0 , C0= 0 and S=1 , C0= 1 (C) S=1 , C0= 1 and S=0 , C0= 0 (D) S=0 , C0= 1 and S=1 , C0= 0

Description : Consider a full-adder with the following input values: (a) x=1, y=0 and Ci(carry input) = 0 (b) x=0, y=1 and Ci = 1 Compute the values of S(sum) and C0 (carry output) for the above input values. (A) S=1 , C0= 0 and ... C0= 1 (C) S=1 , C0= 1 and S=0 , C0= 0 (D) S=0 , C0= 1 and S=1 , C0= 0

Last Answer : (A) S=1 , C0= 0 and S=0 , C0= 1

Which of the following is a sequential circuit? (A) Multiplexer (B) Decoder (C) Counter (D) Full adder

Description : Which of the following is a sequential circuit? (A) Multiplexer (B) Decoder (C) Counter (D) Full adder

Last Answer : (C) Counter

Describe how Op-Amp is used as adder using circuit diagram and output voltage equation.

Description : Describe how Op-Amp is used as adder using circuit diagram and output voltage equation.

Last Answer : Summing Amplifier Circuit In this simple summing amplifier circuit, the output voltage, ( Vout ) now becomes proportional to the sum of the input voltages, V1, V2, V3, etc. Then we can ... to the non-inverting input of the op-amp, it will produce the positive sum of the input voltages.

A half adder can be constructed from

Description : A half adder can be constructed from

Last Answer : A half adder can be constructed from One XOR gate and one 'AND‘ gate with their input connected in parallel

A full adder is a combinational circuit that performs the arithmetic sum of three input bits and produces a

Description : A full adder is a combinational circuit that performs the arithmetic sum of three input bits and produces a (a) sum output (b) sum output and a carry (c) sum output with two carries (d) two sums with two carries

Last Answer : A full adder us an a combination logical circuit which will produces an sum and carry when ever more than two inputs were given.

A, what logic element enables FF3 to toggle with the clock?

Description : A, what logic element enables FF3 to toggle with the clock?

Last Answer : The AND gate

What logic levels must exist for the FF to be toggled by the clock?

Description : What logic levels must exist for the FF to be toggled by the clock?

Last Answer : Both J and K must be HIGH.

A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Description : A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Last Answer : . One or the other of the inputs must be HIGH, but not both at the same time.

How do we refer to errors caused by faulty logic and coding mistakes?

Description : How do we refer to errors caused by faulty logic and coding mistakes?

Last Answer : Bugs.

. In the arithmetic/logic section, data is returned to what section after processing?

Description : . In the arithmetic/logic section, data is returned to what section after processing?

Last Answer : Internal storage.