How is fiber sensitivity to bending losses reduced?

How is fiber sensitivity to bending losses reduced?
by

1 Answer

Answer :

Fiber sensitivity to bending losses can be reduced if the  refractive index of the core is increased and/or if the overall diameter  of the fiber increases.
by

Related questions

When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Description : When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Last Answer : D. detector sensitivity

When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Description : When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Last Answer : d. Detector sensitivity

In fiber-to-fiber connections, Fresnel reflection is one source of coupling losses. Light is reflected back into the source fiber and is lost. What causes Fresnel reflection?

Description : In fiber-to-fiber connections, Fresnel reflection is one source of coupling losses. Light is reflected back into the source fiber and is lost. What causes Fresnel reflection?

Last Answer : A step change in refractive index that occurs at fiber joints, caused by fiber separation.

Fiber-to-fiber coupling loss is affected by intrinsic and extrinsic coupling losses. Can intrinsic coupling losses be limited by limiting fiber mismatches?

Description : Fiber-to-fiber coupling loss is affected by intrinsic and extrinsic coupling losses. Can intrinsic coupling losses be limited by limiting fiber mismatches?

Last Answer : Yes.

How are source-to-fiber coupling and microbending and macrobending losses affected by changes in core diameter and D?

Description : How are source-to-fiber coupling and microbending and macrobending losses affected by changes in core diameter and D?

Last Answer : Coupling efficiency increases with both core diameter and D, while bending losses increase directly with core diameter and inversely with D.

Scattering losses are caused by the interaction of light with density fluctuations within a fiber. What are the two scattering mechanisms called when the size of the density fluctuations is (a) greater than and (b) less than one-tenth of the operating wavelength?

Description : Scattering losses are caused by the interaction of light with density fluctuations within a fiber. What are the two scattering mechanisms called when the size of the density fluctuations is (a) greater than and (b) less than one-tenth of the operating wavelength?

Last Answer : . (a) Mie scattering; (b) Rayleigh scattering.

While coupled power and bending loss favor a high D, which Dvalue, smaller or larger, improves fiber bandwidth?

Description : While coupled power and bending loss favor a high D, which Dvalue, smaller or larger, improves fiber bandwidth?

Last Answer : Smaller.

The “Primaquin sensitivity types of haemolytic anaemia has been found to relate to reduced R.B.C activity of which enzyme? (A) Pyruvate kinase deficiency (B) Glucose-6-phosphatase deficiency (C) Glucose-6-p dehydrogenase deficiency (D) Hexokinase deficiency

Description : The “Primaquin sensitivity types of haemolytic anaemia has been found to relate to reduced R.B.C activity of which enzyme? (A) Pyruvate kinase deficiency (B) Glucose-6-phosphatase deficiency (C) Glucose-6-p dehydrogenase deficiency (D) Hexokinase deficiency

Last Answer : C

What term is used to describe the reciprocal of deflection sensitivity of a scope?

Description : What term is used to describe the reciprocal of deflection sensitivity of a scope?

Last Answer : Deflection factor.

When measuring receiver sensitivity, what quantities must you add to the dBm reading obtained on the signal generator or test set?

Description : When measuring receiver sensitivity, what quantities must you add to the dBm reading obtained on the signal generator or test set?

Last Answer : Attenuations of the directional coupler and the connecting cable.

You determine receiver sensitivity by measuring the power level of what signal?

Description : You determine receiver sensitivity by measuring the power level of what signal?

Last Answer : Minimum discernible signal (mds).

A loss of receiver sensitivity has the same effect on range performance as what other loss?

Description : A loss of receiver sensitivity has the same effect on range performance as what other loss?

Last Answer : Transmitter power loss.

Which preamplifier design (high-impedance or transimpedance) provides improvements in bandwidth and greater dynamic range with some degradation in sensitivity from an increase in noise?

Description : Which preamplifier design (high-impedance or transimpedance) provides improvements in bandwidth and greater dynamic range with some degradation in sensitivity from an increase in noise?

Last Answer : Transimpedance.

Which amplifier stage (the preamplifier or the postamplifier) is a dominant contributor of noise and significantly influences the sensitivity of the receiver?

Description : Which amplifier stage (the preamplifier or the postamplifier) is a dominant contributor of noise and significantly influences the sensitivity of the receiver?

Last Answer : The preamplifier.

What is the main factor that determines receiver sensitivity?

Description : What is the main factor that determines receiver sensitivity?

Last Answer : Noise

What is voltmeter sensitivity?

Description : What is voltmeter sensitivity?

Last Answer : It is an indication of the resistance of the meter expressed in ohms per volt. The total resistance of the meter is the sensitivity multiplied by the full-scale voltage.

What is ammeter sensitivity?

Description : What is ammeter sensitivity?

Last Answer : The amount of current that will cause full-scale deflection.

What term is used to express the sensitivity of a voltmeter?

Description : What term is used to express the sensitivity of a voltmeter?

Last Answer : Ohms per volt

(True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Description : (True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Last Answer : False.

7 The main advantage of auto transformer over a two winding transformer is A. Hysteresis losses are reduced B. Saving in winding material C. Copper losses are negligible D. Eddy losses are totally eliminated

Description : 7 The main advantage of auto transformer over a two winding transformer is A. Hysteresis losses are reduced B. Saving in winding material C. Copper losses are negligible D. Eddy losses are totally eliminated

Last Answer : A) hysteresis losses is reduced

Explain how technical losses can be reduced by use of energy efficient transformer in Transmission and Distribution system.

Description : Explain how technical losses can be reduced by use of energy efficient transformer in Transmission and Distribution system.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Eddy current losses in transformer cores can be reduced by the use of 1. Solid cores 2. Laminated cores ...

Description : Eddy current losses in transformer cores can be reduced by the use of  1. Solid cores  2. Laminated cores  3. Ferrites  Select the correct answer using the codes given below : (a) 2 and 3 only (b). 1 and 2 only (c) 1 and 3 only (d) 1, 2 and 3

Last Answer : Eddy current losses in transformer cores can be reduced by the use of  1. Solid cores  2. Laminated cores  3. Ferrites  Select the correct answer using the codes given below : (a) 2 and 3 only (b). 1 and 2 only (c) 1 and 3 only (d) 1, 2 and 3

The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Description : The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Last Answer : C. the total power available minus the attenuation losses

Developed an optical fiber with losses less that 2 dB/km ∙ A. Kao and Bockham ∙ B. Maiman, Kao and Bockham ∙ C. Maiman and Schawlow ∙ D. Kapron, Keck and Maurer

Description : Developed an optical fiber with losses less that 2 dB/km ∙ A. Kao and Bockham ∙ B. Maiman, Kao and Bockham ∙ C. Maiman and Schawlow ∙ D. Kapron, Keck and Maurer

Last Answer : ∙ A. Kao and Bockham

The dominant loss mechanisms in silica fiber are ∙ a. Absorption and radiation losses ∙ b. Absorption and Rayleigh scattering ∙ c. Coupling and radiation losses ∙ d. Radiation and modal dispersion

Description : The dominant loss mechanisms in silica fiber are ∙ a. Absorption and radiation losses ∙ b. Absorption and Rayleigh scattering ∙ c. Coupling and radiation losses ∙ d. Radiation and modal dispersion

Last Answer : b. Absorption and Rayleigh scattering

Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Description : Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Last Answer : ∙ a. It has high losses

Which of the following is a disadvantage for plastic fiber optics? ∙ a. Noise immunity ∙ b. Electric hazards ∙ c. Higher losses ∙ d. All of these

Description : Which of the following is a disadvantage for plastic fiber optics? ∙ a. Noise immunity ∙ b. Electric hazards ∙ c. Higher losses ∙ d. All of these

Last Answer : c. Higher losses

Developed an optical fiber with losses less that 2 dB/km

Description : Developed an optical fiber with losses less that 2 dB/km

Last Answer : Kao and Bockham

What is the most likely cause of losses in waveguide systems?

Description : What is the most likely cause of losses in waveguide systems?

Last Answer : Improperly connected joints or damaged inner surface.

Name the three power losses in a transformer

Description : Name the three power losses in a transformer

Last Answer : Copper-loss, eddy-current loss, and hysteresis loss

What is the term used to refer to the losses which can be traced to the dielectric of a capacitor?

Description : What is the term used to refer to the losses which can be traced to the dielectric of a capacitor?

Last Answer : Power losses.

What types of losses cause the dielectric material between the conductors to be heated?

Description : What types of losses cause the dielectric material between the conductors to be heated?

Last Answer : Dielectric losses.

Losses caused by skin effect and the I2R (power) loss are classified as what type of loss?

Description : Losses caused by skin effect and the I2R (power) loss are classified as what type of loss?

Last Answer : Copper losses.

What are the three types of line losses associated with transmission lines?

Description : What are the three types of line losses associated with transmission lines?

Last Answer : Copper, dielectric, and radiation.

What causes copper losses?

Description : What causes copper losses?

Last Answer : Resistance in the armature coils, which increases with temperature

Name two types of power losses associated with a capacitor.

Description : Name two types of power losses associated with a capacitor.

Last Answer : a. Hysteresis b. Dielectric leakage

Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Description : Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Last Answer : D. Rayleigh scattering loss

These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation. ∙ A. microbending ∙ B. macrobending ∙ C. constant-radius bending ∙ D. kinks

Description : These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation. ∙ A. microbending ∙ B. macrobending ∙ C. constant-radius bending ∙ D. kinks

Last Answer : C. constant-radius bending

Under sagging bending moment, the uppermost fiber of the beam is in (a) Shear (b) Compression (c) Tension (d) None)

Description : Under sagging bending moment, the uppermost fiber of the beam is in (a) Shear (b) Compression (c) Tension (d) None)

Last Answer : (b) Compression

How can modal dispersion reduced entirely? ∙ A. Use a graded index fiber ∙ B. Use a single-mode fiber ∙ C. Use a monochromatic light source ∙ D. Use a very sensitive light detector

Description : How can modal dispersion reduced entirely? ∙ A. Use a graded index fiber ∙ B. Use a single-mode fiber ∙ C. Use a monochromatic light source ∙ D. Use a very sensitive light detector

Last Answer : Use a single-mode fiber

When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Description : When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Last Answer : ∙ b. Antireflection coating

In a control synchro system, when is the output of the CT reduced to zero?

Description : In a control synchro system, when is the output of the CT reduced to zero?

Last Answer : When the CX and CT rotors are in correspondence.

Why is the negative-resistance magnetron often operated with reduced filament voltage?

Description : Why is the negative-resistance magnetron often operated with reduced filament voltage?

Last Answer : To reduce the effects of filament bombardment.

How can eddy current be reduced?

Description : How can eddy current be reduced?

Last Answer : By laminating the core material.

How can loss be reduced during construction (or fabrication) of optical fibers?

Description : How can loss be reduced during construction (or fabrication) of optical fibers?

Last Answer : By removing the impurities from optical fiber.

Which type of optical splitter (Y-coupler or T-coupler) splits only a small amount of power from the input fiber to one of the output fibers?

Description : Which type of optical splitter (Y-coupler or T-coupler) splits only a small amount of power from the input fiber to one of the output fibers?

Last Answer : T-coupler

What is the difference between passive and active fiber optic couplers?

Description : What is the difference between passive and active fiber optic couplers?

Last Answer : Passive couplers redistribute optical signals without optical-to electrical conversion.

The Navy classifies fiber optic connectors in what two ways?

Description : The Navy classifies fiber optic connectors in what two ways?

Last Answer : Light-duty and heavy-duty connectors.

Is coupling loss from fiber separation and lateral misalignment more critical in expanded-beam or butt-jointed connectors?

Description : Is coupling loss from fiber separation and lateral misalignment more critical in expanded-beam or butt-jointed connectors?

Last Answer : Butt-jointed connectors.

Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?

Description : Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?

Last Answer : Butt-jointed connectors.