What are the majority current carriers in a PNP transistor?

1 Answer

Answer :

Holes.

Related questions

Description : What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Last Answer : The polarity of voltage applied to the PNP transistor is opposite of that applied to the NPN

Description : The part of transistor which is heavily doped to produce a large number of majority carriers is –

Last Answer : Emitter

Description : The part of transistor which is heavily doped to produce a large number of majority carriers is

Last Answer : Emitter

Description : A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Last Answer : (a) Emitter

Description : In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Last Answer : (a) NPN

Description : What are the majority carriers in a P-type semiconductor?

Last Answer : Holes.

Description : What are the majority carriers in an N-type semiconductor?

Last Answer : Electrons.

Description : As shown in the illustration, which of the elements listed does the line 'B' represent in the basic schematic symbol of a PNP transistor? EL-0068 A. Base B. Emitter C. Cathode D. Collector

Last Answer : Answer: D

Description : PNP and NPN transistor:

Last Answer : PNP transistors is the one in which one N, type semiconductor is sandwiched in between two P type or accepter diodes while NPN transistor is the one in which two N type semiconductors are fitted on the both sides of p-type semiconductor to allow to pass current from them.

Description : Explain the operating principle of PNP transistor. 

Last Answer : The circuit connection of PNP transistor with supply voltages is as shown above. The emitter-base junction is connected as forward bias. Due to this the emitter pushes the holes from the P ... by the collector. This develops the collector current IC. This is how a PNP transistor operates. 

Description : In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit (1) All calculations done earlier have to be repeated (2) Replace all calculated voltages by ... all calculated currents by reverse values (4) Replace all calculated voltages and currents by reverse values 

Last Answer : In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit  Replace all calculated voltages and currents by reverse values 

Last Answer : A “PNP” transistor is made of Either Ge (or) Si

Description : Forward current through a semi-conductor diode circuit is due to ________ (a) Minority carriers (b) majority carriers (c) holes (d) electrons

Last Answer : (b) majority carriers

Description : Barrier potential in a P-N junction is caused by (A) Thermally generated electrons and holes. (B) Diffusion of majority carriers across the junction. (C) Migration of minority carriers across the junction. (D) Flow of drift current.

Last Answer : (B) Diffusion of majority carriers across the junction.

Description : What is the primary difference between the NPN and PNP amplifiers?

Last Answer : The polarity of the source voltage

Description : In a reverse biased PN-junction, which current carriers cause leakage current?

Last Answer : The minority carriers

Description : In a p-type semiconductor, Which are the majority charge carriers? -Do You Know?

Last Answer : answer:

Description : The majority charge carriers in p-type silicon are (A) Free electrons (B) Ions (C) Conduction electrons (D) Holes

Last Answer : Option D

Description : N-type region has majority charge carriers as (a) Holes (b) protons (c) neutrons (d) electrons

Last Answer : (d) electrons

Description : The majority carriers in N-type substance are a) Holes b) Protons c) Neutrons d) Electrons

Last Answer : d) Electrons

Description : In p-type semiconductor the majority carriers are (A) holes. (B) electrons. (C) positive ions. (D) negative ions.

Last Answer : (A) holes.

Description : Holes are majority carriers in (A) P-type semiconductors. (B) N-type semiconductors. (C) Insulators. (D) Superconductors.

Last Answer : (A) P-type semiconductors.

Description : In N-type semiconductors the majority of the carriers are: w) holes x) electrons y) protons z) neutrons 

Last Answer : ANSWER: X -- ELECTRONS

Description : Majority carriers in n type semiconductor are_______. A. Electrons B. Holes C. Both D. None

Last Answer : Majority carriers in n type semiconductor are Electrons.

Description : The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Last Answer : (a) Acts as a supplier of charge carriers

Description : In an npn transistor, _____ are the minority carriers.   (a) Free electrons (b) Acceptor ions (c) Donor ions (d) Holes

Last Answer : In an npn transistor, Holes are the minority carriers.

Description : Which transistor configuration has a current gain of less than 1?

Last Answer : Common base.

Description : Name the two current loops in a transistor.

Last Answer : The base current loop and the collector current loop

Description : What percentage of current in an NPN transistor reaches the collector?

Last Answer : 98 percent.

Description : As a transistor ages, what happens to the leakage current?

Last Answer : It tends to increase

Description : What is the full form of 'PnP' ? -How To ?

Last Answer : The full form of 'PnP' is Plug and Play

Last Answer : Plug 'n Play

Description : As shown in the illustration, which electrical symbol represents a PNP type semiconductor? EL-0065 A. A B. B C. C D. D

Last Answer : Answer: C

Description : An important characteristic of the device shown in figure 'B' of the illustration as compared with conventional NPN or PNP transistors is its ____________. EL-0065 A. higher temperature sensitivity B. higher power ratings C. very high input resistance D. all of the above

Last Answer : Answer: C

Description : Which of the following statements correctly applies to transistors? A. NDN and PNP are the two basic types of transistors. B. The three terminals are called the emitter, base, and collector. C. The emitter separates the base and collector. D. The collector separates the emitter and base.

Last Answer : Answer: B

Description : Draw symbol of NPN and PNP transistors. 

Last Answer : symbol of NPN and PNP transistors

Description : Most of the transistors are NPN type and not PNP type because  1.NPN transistor gives large voltage gain 2.NPN transistors are more negative than PNP transistors 3.In NPN transistor, the current ... free electrons which are less mobiles than holes 4.We can have high conduction is NPN transistors 

Last Answer : Most of the transistors are NPN type and not PNP type because We can have high conduction is NPN transistors 

Description : What is the purpose of the majority of circuits in a radar system?

Last Answer : Timing and control.

Description : In single mode operation, the value of the normalized frequency (V) should remain near the 2.405 level. If the value of V is less than 1, do single mode fibers carry a majority of the power in the core or cladding material?

Last Answer : Cladding material.

Description : In multimode step-index fibers, the majority of light propagates in the fiber core for what reason?

Last Answer : Most modes in multimode step-index fibers propagate far from cutoff.

Description : The majority of vlf transmitters are used for what purpose?

Last Answer : Fleet communications or navigation.

Description : A light wave enters a sheet of glass at a perfect right angle to the surface. Is the majority of the wave reflected, refracted, transmitted, or absorbed?

Last Answer : Transmitted.

Description : In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Last Answer : To allow the capacitor time to discharge.

Description : What are the factors that limit the frequency response of a transistor amplifier?

Last Answer : The capacitance and inductance of the circuit and the interelectrode capacitance of the transistor.

Description : When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Last Answer : A leaking transistor

Description : When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Last Answer : Normal gain.

Description : What are two transistor tests that can be done with an ohmmeter?

Last Answer : Gain and junction resistance.

Description : How is the collector lead identified on an oval-shaped transistor?

Last Answer : By the wide space between the collector lead and the other two leads (emitter and base)

Description : What safety precaution must be taken before replacing a transistor?

Last Answer : The power must be removed from the circuit.

Description : Which transistor configuration has the highest input resistance?

Last Answer : Common collector.