How is the collector lead identified on an oval-shaped transistor?

How is the collector lead identified on an oval-shaped  transistor?
by

1 Answer

Answer :

By the wide space between the collector lead and the other two  leads (emitter and base)
by

Related questions

What percentage of current in an NPN transistor reaches the collector?

Description : What percentage of current in an NPN transistor reaches the collector?

Last Answer : 98 percent.

To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Description : To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Last Answer : Positive, more positive.

I have dark brown and white oval shaped spots on my Ruellia Mexican Petunia tree, what are they

Description : I have dark brown and white oval shaped spots on my Ruellia Mexican Petunia tree, what are they

Last Answer : Need Answer

what berry bush has red berries that turn blue in groups of three and eye shaped oval green leaves?

Description : what berry bush has red berries that turn blue in groups of three and eye shaped oval green leaves?

Last Answer : I would not eat them until you know exactly what they are.............take a branch to a grower and ask him...............it could be wild blueberries.............they are much ... ............there are also berries that are poisonious..........I would investigate further before eating them.

I need help identifying a bush with small purple berries and oval shaped leaves

Description : I need help identifying a bush with small purple berries and oval shaped leaves

Last Answer : Need Answer

Pluto has mean diameter of 2,300 km and very eccentric orbit (oval shaped) around the Sun, with a perihelion (nearest) distance of 4.4 × 10^9 km

Description : Pluto has mean diameter of 2,300 km and very eccentric orbit (oval shaped) around the Sun, with a perihelion (nearest) distance of 4.4 × 10^9 km

Last Answer : Pluto has mean diameter of 2,300 km and very eccentric orbit (oval shaped) around the Sun, ... Assume that distance from the Sun can be neglected.

Is a rectangular or oval shaped table best suited for a small Dining Room?

Description : Is a rectangular or oval shaped table best suited for a small Dining Room?

Last Answer : An oval shaped table in a small dining room will make the room look a little less crowded.

The sun appears oval shaped or flattened due to (a) dispersion (b) scattering (c) atmospheric refraction (d) cannot say

Description : The sun appears oval shaped or flattened due to (a) dispersion (b) scattering (c) atmospheric refraction (d) cannot say

Last Answer : (c) atmospheric refraction

When satellite radio beam is aimed towards earth, it illuminates on the earth for an oval shaped area called

Description : When satellite radio beam is aimed towards earth, it illuminates on the earth for an oval shaped area called

Last Answer : footprint

In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Description : In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Last Answer : Answer: D

As shown in the illustration, which of the elements listed does the line 'B' represent in the basic schematic symbol of a PNP transistor? EL-0068 A. Base B. Emitter C. Cathode D. Collector

Description : As shown in the illustration, which of the elements listed does the line 'B' represent in the basic schematic symbol of a PNP transistor? EL-0068 A. Base B. Emitter C. Cathode D. Collector

Last Answer : Answer: D

Which of the procedures listed could result in damaging a transistor beyond repair? A. Applying incorrect polarity to the collector circuit. B. Applying excessive voltage to the input circuit. C. Careless soldering which would overheat the transistor. D. All of the above.

Description : Which of the procedures listed could result in damaging a transistor beyond repair? A. Applying incorrect polarity to the collector circuit. B. Applying excessive voltage to the input circuit. C. Careless soldering which would overheat the transistor. D. All of the above.

Last Answer : Answer: D

Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. C. Shift the 'Q' point to increase collector current. D. Increase the potential difference between the emitter and the base.

Description : Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. ... point to increase collector current. D. Increase the potential difference between the emitter and the base.

Last Answer : Answer: B

Which of the listed components does line 'C' represent for the transistor illustrated? EL-0068 A. Grid B. Plate C. Emitter D. Collector

Description : Which of the listed components does line 'C' represent for the transistor illustrated? EL-0068 A. Grid B. Plate C. Emitter D. Collector

Last Answer : Answer: C

If the operating point of an NPN transistor amplifier is selected in saturation region, it is likely to result in A) Thermal runaway of transistor B) Clipping of output in the positive half of the input signal C) Need for high dc collector supply D) Clipping of output in the negative half of the input signal

Description : If the operating point of an NPN transistor amplifier is selected in saturation region, it is likely to result in A) Thermal runaway of transistor B) Clipping of output in the positive half of the ... for high dc collector supply D) Clipping of output in the negative half of the input signal

Last Answer : B) Clipping of output in the positive half of the input signal

A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Description : A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Last Answer : (a) Emitter

Current gain of a transistor which has collector current of 10 mA and a base current of 40 micro Ampere is: (a) 25 (b) 250 (c) 2500 (d) 25000

Description : Current gain of a transistor which has collector current of 10 mA and a base current of 40 micro Ampere is: (a) 25 (b) 250 (c) 2500 (d) 25000

Last Answer : b) 250

In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Description : In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Last Answer : a) located on emitter

For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Description : For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Last Answer : (c) reverse biased

The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Description : The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Last Answer : (d) none of above

In p-n-p transistor, collector current is (a) Equal to emitter current (b) slightly less than emitter current (c) greater than emitter current (d) any of above

Description : In p-n-p transistor, collector current is (a) Equal to emitter current (b) slightly less than emitter current (c) greater than emitter current (d) any of above

Last Answer : (c) greater than emitter current

In n-p-n transistor, p works as ________ (a) Collector (b) emitter (c) base (d) any of above

Description : In n-p-n transistor, p works as ________ (a) Collector (b) emitter (c) base (d) any of above

Last Answer : c) base

The central region of transistor is called (a) Base (b) emitter (c) collector (d) neutral

Description : The central region of transistor is called (a) Base (b) emitter (c) collector (d) neutral

Last Answer : (b) emitter

The common-emitter transistor circuit can amplify a small current signal because a small change in the signal current produces one of the following. Does the change in signal produce a large change in the: w) emitter-base voltage x) base current y) collector current z) collector voltage

Description : The common-emitter transistor circuit can amplify a small current signal because a small change in the signal current produces one of the following. Does the change in signal produce a large change in the: w) emitter-base voltage x) base current y) collector current z) collector voltage

Last Answer : ANSWER: Y -- COLLECTOR CURRENT

What are the three elements of a bipolar transistor? Are they the: w) grid, plate, cathode x) suppressor, deflector, target y) energizer, controller, terminus z) emitter, base, collector

Description : What are the three elements of a bipolar transistor? Are they the: w) grid, plate, cathode x) suppressor, deflector, target y) energizer, controller, terminus z) emitter, base, collector

Last Answer : ANSWER: Z -- EMITTER, BASE, COLLECTOR

In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the

Description : In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the base current is: (1) 10 µA (2) 100 µA (3) 1 A (4) 10 A 

Last Answer : In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the base current is: 100 µA

A transistor has a typical value of β = 200 , If the collector current is 15 mA, then base current will be

Description : A transistor has a typical value of β = 200 , If the collector current is 15 mA, then base current will be

Last Answer : A transistor has a typical value of β = 200 , If the collector current is 15 mA, then base current will be 0.075 mA

If a transistor were operated with emitter and collector interchanged, then

Description : If a transistor were operated with emitter and collector interchanged, then  1 .emitter current will increase  2. Collector current will increase  3. Base current will decrease  4. No current flow will take place 

Last Answer : If a transistor were operated with emitter and collector interchanged, then Collector current will increase 

In a junction transistor, the doping level of collector region is:

Description : In a junction transistor, the doping level of collector region is:  (1) Higher than emitter region (2) Lower than base region (3) Is higher than base region but lower than emitter region  (4) Independent of the doping of base and emitter regions.

Last Answer : In a junction transistor, the doping level of collector region is: Is higher than base region but lower than emitter region.

What type of feedback is usually caused by the base-to collector interelectrode capacitance?

Description : What type of feedback is usually caused by the base-to collector interelectrode capacitance?

Last Answer : Degenerative or negative

What is the output current in the common-collector circuit?

Description : What is the output current in the common-collector circuit?

Last Answer : IE.

What causes the change in collector current in an emitter injection modulator?

Description : What causes the change in collector current in an emitter injection modulator?

Last Answer : Gain is varied by changing the voltage on the emitter.

The collector-injection modulator is similar to what type of tube modulator?

Description : The collector-injection modulator is similar to what type of tube modulator?

Last Answer : Plate modulator.

Why must cables and wires be identified?

Description : Why must cables and wires be identified?

Last Answer : To provide the technician with a means to trace the wires when troubleshooting and repairing electrical and electronic systems.

Rotation of an rf-feed source to produce a conical scan pattern is identified by what term?

Description : Rotation of an rf-feed source to produce a conical scan pattern is identified by what term?

Last Answer : Nutation.

The distance from a radar set to a target measured along the line of sight is identified by what term?

Description : The distance from a radar set to a target measured along the line of sight is identified by what term?

Last Answer : Range.

In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Description : In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Last Answer : To allow the capacitor time to discharge.

What are the factors that limit the frequency response of a transistor amplifier?

Description : What are the factors that limit the frequency response of a transistor amplifier?

Last Answer : The capacitance and inductance of the circuit and the interelectrode capacitance of the transistor.

When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Description : When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Last Answer : A leaking transistor

When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Description : When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Last Answer : Normal gain.

What are two transistor tests that can be done with an ohmmeter?

Description : What are two transistor tests that can be done with an ohmmeter?

Last Answer : Gain and junction resistance.

What safety precaution must be taken before replacing a transistor?

Description : What safety precaution must be taken before replacing a transistor?

Last Answer : The power must be removed from the circuit.

Which transistor configuration has the highest input resistance?

Description : Which transistor configuration has the highest input resistance?

Last Answer : Common collector.

Which transistor configuration has a current gain of less than 1?

Description : Which transistor configuration has a current gain of less than 1?

Last Answer : Common base.

What method for checking transistors is cumbersome when more than one transistor is bad in a circuit?

Description : What method for checking transistors is cumbersome when more than one transistor is bad in a circuit?

Last Answer : The substitution method.

What is the greatest danger to a transistor?

Description : What is the greatest danger to a transistor?

Last Answer : Heat.

List three items of information normally included in the general description section of a specification sheet for a transistor.

Description : List three items of information normally included in the general description section of a specification sheet for a transistor.

Last Answer : The kind of transistor, the transistor's common applications, and mechanical data

In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Description : In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Last Answer : The signals are opposite in polarity or 180 degrees out of phase with each other.