Transient stability can be improved by a) By putting series capacitor b) By using dynamic resister c) Auto re-closers d) All of the above

Transient stability can be improved by
a) By putting series capacitor
b) By using dynamic resister
c) Auto re-closers
d) All of the above
by

1 Answer

Answer :

Ans: All of the above
by

Related questions

The electric charge is stored in a device called: (1) Inductor (2) Capacitor (3) Resister (4) Transformer

Description : The electric charge is stored in a device called: (1) Inductor (2) Capacitor (3) Resister (4) Transformer

Last Answer : (2) Capacitor Explanation: A capacitor is a passive twoterminal electronic component that stores electrical energy in an electric field. The effect of a capacitor is known as capacitance.

what is transient stability limit ?

Description : what is transient stability limit ?

Last Answer : The transient stability limit is the max power that can be transmitted by a machine to a fault or a receiving system during a transient state without loss of synchronism.The transient stability limit is always less than the steady state stability limit.

What is transient state stability limit?

Description : What is transient state stability limit?

Last Answer : The transient state stability limit is the max. power that can be transmitted by a machine to a receiving system without loss of synchronism.In steady state the power transferred by synchronous machine is always less than the steady state stability limit.

Define transient stability?

Description : Define transient stability?

Last Answer : The transient stabilitymis defined as the abilitymof a system to remain stable for large disturbance.

Improvement of transient stability using SVC

Description : Improvement of transient stability using SVC

Last Answer : Improvement of transient stability using SVC The static VAR compensator (SVC) is a shunt connected FACTS device. SVC have two modes one is inductive ... ;transmittable power. Transient stability improvement can be estimated using equal area criterion.

Which one of the following statements is true? a. Business-as-usual activities cannot be improved. b. Business-as-usual activities are more difficult to manage than projects. c. Projects are transient endeavours that bring about change to business-as-usual. d. A project is always the starting point for operation refinement

Description : Which one of the following statements is true? a. Business-as-usual activities cannot be improved. b. Business-as-usual activities are more difficult to manage than projects. c. Projects are ... change to business-as-usual. d. A project is always the starting point for operation refinement

Last Answer : c. Projects are transient endeavours that bring about change to business-as-usual.

Which one of the following statements is true? a. Business-as-usual activities cannot be improved. b. Business-as-usual activities are more difficult to manage than projects. c. Projects are transient endeavours that bring about change to business-as-usual. d. A project is always the starting point for operation refinement.

Description : Which one of the following statements is true?  a. Business-as-usual activities cannot be improved.  b. Business-as-usual activities are more difficult to manage than projects.  c. Projects are ... change to business-as-usual.  d. A project is always the starting point for operation refinement.

Last Answer : c. Projects are transient endeavours that bring about change to business-as-usual

The transient state stability limit is always

Description : The transient state stability limit is always (A) Greater than the steady state stability limit. (B) Smaller than the steady state Stability limit. (C) Equal to the steady state stability limit. (D) The two are not related.

Last Answer : The transient state stability limit is always Smaller than the steady state Stability limit.

The steady state stability limit as compared to the transient state stability limit is always

Description : The steady state stability limit as compared to the transient state stability limit is always

Last Answer : The steady state stability limit as compared to the transient state stability limit is always Greater

The 'Equal area criterion' for the determination of transient stability of a synchronous machine connected to

Description : The 'Equal area criterion' for the determination of transient stability of a synchronous machine connected to an infinite bus  (1) ignores line as well as synchronous machine resistance ... consideration the possibility of machine losing synchronism after it has survived during the first swing.

Last Answer : 1

Which of the following statements is true? steady-state stability limit is greater than transient stability limit

Description : Which of the following statements is true?  (1) steady-state stability limit is greater than transient stability limit  (2) steady-state stability limit is equal to transient stability ... made regarding the equality or otherwise of the steady-state stability limit and transient stability limit

Last Answer : Which of the following statements is true?  (1) steady-state stability limit is greater than transient stability limit  (2) steady-state stability limit is equal to transient ... made regarding the equality or otherwise of the steady-state stability limit and transient stability limit

With fault clearing time, the transient stability of a power system

Description : With fault clearing time, the transient stability of a power system

Last Answer : With fault clearing time, the transient stability of a power system decreases

Transient stability studies of a power system are usually carried out over a time period of

Description : Transient stability studies of a power system are usually carried out over a time period of (A) two or more seconds (B) several time swings (C) time interval of first swing (D) sustained oscillations

Last Answer : Transient stability studies of a power system are usually carried out over a time period of several time swings

For a transient stability analysis, as long as equal area criterion is satisfied, the maximum angle to which ...

Description : For a transient stability analysis, as long as equal area criterion is satisfied, the maximum angle to which rotor angle can oscillate is:  (A) 0˚ to 20˚ (B) 45˚ to 50˚ (C) Greater than 90˚ (D) 65˚ to 85˚

Last Answer : B

_____technique gives quick transient and stability response?

Description : _____technique gives quick transient and stability response?

Last Answer : Root locus technique gives quick transient and stability response.

Helical torsion spring is used in (A) door hinges (B) door closers (C) automobile starters (D) all of the above

Description : Helical torsion spring is used in (A) door hinges (B) door closers (C) automobile starters (D) all of the above

Last Answer : (D) all of the above

Why could my heater resister in my car keep blowing out?

Description : Why could my heater resister in my car keep blowing out?

Last Answer : I’d go with a new blower motor. Number one reason the resistor would blow out multiple times is the motor.

Where is the heater blower resister located on a ford ranger?

Description : Where is the heater blower resister located on a ford ranger?

Last Answer : What is the answer ?

The steady state stability of the power system can be improved by

Description : The steady state stability of the power system can be improved by (A) using machines of high impedance (B) connecting transmission lines in series. (C) connecting lines in parallel. (D) reducing, the excitation of the machines.

Last Answer : The steady state stability of the power system can be improved by connecting lines in parallel.

steady-state stability of a power system is improved by

Description : steady-state stability of a power system is improved by

Last Answer : steady-state stability of a power system is improved by using double circuit line instead of single circuit line

Power factor of an inductive circuit is usually improved by connecting capacitor to it in?

Description : Power factor of an inductive circuit is usually improved by connecting capacitor to it in?

Last Answer : Power factor of an inductive circuit is usually improved by connecting capacitor to it in parallel.

If a 6 volt battery were connected in series with a 24 volt battery by putting their negative terminals together, what would be the result? A. 'Zero' volts B. 12 volts of the opposite polarity C. 18 volts, positive on the 24 volt battery D. 30 volts, negative on the 24 volt battery

Description : If a 6 volt battery were connected in series with a 24 volt battery by putting their negative terminals together, what would be the result? A. 'Zero' volts B. 12 volts of the opposite polarity C. 18 volts, positive on the 24 volt battery D. 30 volts, negative on the 24 volt battery

Last Answer : Answer: C

Which of the device is employed in substation to limit the short circuit current in the power system: a) Shunt condenser b) Reactor c) Series capacitor d) Shunt capacitor

Description : Which of the device is employed in substation to limit the short circuit current in the power system: a) Shunt condenser b) Reactor c) Series capacitor d) Shunt capacitor

Last Answer : Ans: B

The most inefficient method of voltage reduction, from the standpoint of power loss, even when placed in series with the load, is the use of a/an ____________. A. capacitor B. inductor C. resistor D. transistor

Description : The most inefficient method of voltage reduction, from the standpoint of power loss, even when placed in series with the load, is the use of a/an ____________. A. capacitor B. inductor C. resistor D. transistor

Last Answer : Answer: C

The most inefficient method of voltage reduction from the stand point of power loss, is a/an _____________. A. capacitor in series with the load B. inductor in series with the load C. capacitor and inductor in series with the load D. resistor in series with the load

Description : The most inefficient method of voltage reduction from the stand point of power loss, is a/an _____________. A. capacitor in series with the load B. inductor in series with the load C. capacitor and inductor in series with the load D. resistor in series with the load

Last Answer : Answer: D

A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two back-to-back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Description : A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two ... -back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Last Answer : Answer: C

When we connect the large capacitor bank in series ?

Description : When we connect the large capacitor bank in series ?

Last Answer : A :we connect large capacitor bank in series to improve the voltage power supply at the load end in balanced transmission line when there is considerable voltage drop along the balanced transmission line due ... - %6 )of the rated high terminal voltage )the large capacitor bank is used in series.

When we connect the capacitor bank in series?

Description : When we connect the capacitor bank in series?

Last Answer : We connect capacitor bank in series to improve the voltage profile at the load end in transmission line there is considerable voltage drop along the transmission line due to impedance of the line. so in order to ... i.e (+ or - %6 )of the rated terminal voltage the capacitor bank is used in series

In a capacitor start single-phase induction motor, the capacitor is connected (A) in series with main winding. (B) in series with auxiliary winding. (C) in series with both the windings. (D) in parallel with auxiliary winding.

Description : In a capacitor start single-phase induction motor, the capacitor is connected (A) in series with main winding. (B) in series with auxiliary winding. (C) in series with both the windings. (D) in parallel with auxiliary winding.

Last Answer : Ans: B To make single phase motor self start. We split the phases at 90 degree. Hence, motor behaves like a two phase motor.

One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. Heating of capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Description : One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. ... capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Last Answer : B. Heating of capacitor in the oscillator

One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency oscillation. A. Heating and expansion of oscillator coil B. DC and RF ac heating of resistors which cause change in values C. Heating of capacitor in the oscillatorD. Loose connections in the oscillator, amplifier, or antenna circuits.

Description : One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency ... capacitor in the oscillator D. Loose connections in the oscillator, amplifier, or antenna circuits.

Last Answer : D. Loose connections in the oscillator, amplifier, or antenna circuits.

A series wound DC motor has its armature and field connected in series with a resistor. When the motor is disconnected from its power supply, this motor will exemplify __________. A. the proper connections for across the line starting B. the proper connections for an automatic strip heater C. a reversing controller circuit D. dynamic braking

Description : A series wound DC motor has its armature and field connected in series with a resistor. When the motor is disconnected from its power supply, this motor will exemplify __________. A. the ... the proper connections for an automatic strip heater C. a reversing controller circuit D. dynamic braking

Last Answer : Answer: D

The purpose of 'R6' in the winch circuit shown in the illustration is to _______________. EL-0102 A. maintain dry conditions within the winch brake box B. keep the series field current at a low value during 'fourth and fifth point lowering' C. act as the armature dynamic braking load to assist the winch in stopping D. limit the armature current during lowering operation with heavy loads

Description : The purpose of 'R6' in the winch circuit shown in the illustration is to _______________. EL-0102 A. maintain dry conditions within the winch brake box B. keep the series field current at ... to assist the winch in stopping D. limit the armature current during lowering operation with heavy loads

Last Answer : Answer: C

What flight condition should be expected when an aircraft leaves ground effect? a. A decrease in parasite drag permitting a lower angle of attack b. An increase induced drag and a requirement for a higher angle of attack c. An increase in dynamic stability d. A decrease in induced drag requiring a smaller angle of attack

Description : What flight condition should be expected when an aircraft leaves ground effect? a. A decrease in parasite drag permitting a lower angle of attack b. An increase induced drag and a requirement ... increase in dynamic stability d. A decrease in induced drag requiring a smaller angle of attack

Last Answer : b. An increase induced drag and a requirement for a higher angle of attack

Which of the following is not advantage of robotics? A : Greater flexibility and re-programmabilityB : Greater response time to inputs than human C : Greater unemployment D : Improved product quality

Description : Which of the following is not advantage of robotics? A : Greater flexibility and re-programmabilityB : Greater response time to inputs than human C : Greater unemployment D : Improved product quality

Last Answer : C : Greater unemployment

Which of the following is not advantage of robotics? A : Greater flexibility and re-programmability B : Greater response time to inputs than humanC : Greater unemployment D : Improved product quality

Description : Which of the following is not advantage of robotics? A : Greater flexibility and re-programmability B : Greater response time to inputs than humanC : Greater unemployment D : Improved product quality

Last Answer : C : Greater unemployment

What did conservatives focus on at the Congress of Vienna? Select the appropriate option a) To re-establish peace and stability in Europe b) To establish socialism in Europe c) To introduce democracy in France d) To set up a new Parliament in Austria.

Description : What did conservatives focus on at the Congress of Vienna? Select the appropriate option a) To re-establish peace and stability in Europe b) To establish socialism in Europe c) To introduce democracy in France d) To set up a new Parliament in Austria.

Last Answer : a) To re-establish peace and stability in Europe

The transient response, with feedback system, a) Rises slowly b) Rises quickly c) Decays slowly d) Decays quickly

Description : The transient response, with feedback system, a) Rises slowly b) Rises quickly c) Decays slowly d) Decays quickly

Last Answer : Ans: D

The advantage of using the illustrated circuit configuration is _________. EL-0045 A. high input resistance B. high current gain C. the best stability with an increase in temperature D. the input and output are 180 degrees out of phase

Description : The advantage of using the illustrated circuit configuration is _________. EL-0045 A. high input resistance B. high current gain C. the best stability with an increase in temperature D. the input and output are 180 degrees out of phase

Last Answer : Answer: C

A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray can of refrigerant approved for this purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Description : A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray ... purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Last Answer : Answer: B

A capacitor can be tested using a megohmmeter or an ohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value for the capacitor B. first swing quickly to 'zero', then gradually move up the scale as the capacitor charges C. immediately deflect to and remain at zero D. immediately swing to a high reading and then gradually decrease

Description : A capacitor can be tested using a megohmmeter or an ohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance ... deflect to and remain at zero D. immediately swing to a high reading and then gradually decrease

Last Answer : Answer: C

Firefox question (re. auto-playing downloads)

Description : Firefox question (re. auto-playing downloads)

Last Answer : answer:Disclaimer: I am not a Firefox user. It sounds like you might need to tweak a setting in the player, instead of in Firefox. Which player are you using, and have you tried looking at its autoplay settings?

The performance of a cascade of CSTR's can be improved by adding (A) A P.F. reactor in series (B) A P.F. reactor in parallel (C) More CSTR's in series (D) More CSTR's in parallel

Description : The performance of a cascade of CSTR's can be improved by adding (A) A P.F. reactor in series (B) A P.F. reactor in parallel (C) More CSTR's in series (D) More CSTR's in parallel

Last Answer : (C) More CSTR's in series

Transient signals can be observed using

Description : Transient signals can be observed using  (a) storage oscilloscope (b) sampling oscilloscope (c) wave analyzer (d) spectrum analyzer

Last Answer : Transient signals can be observed using storage oscilloscope

How the heat dissipation is improved by providing the cooling tubes?

Description : How the heat dissipation is improved by providing the cooling tubes?

Last Answer : The cooling tubes will improve the circulation of oil. The circulation of oil is due to effective pressure heads produced by columns of oil in tubes. The improvement in cooling is accounted by taking the specific heat dissipation due to convection as 35% more than that without tubes.

Mention the disadvantages of low power factor? How can it be improved?

Description : Mention the disadvantages of low power factor? How can it be improved?

Last Answer : Disadvantages of low power factor: Line losses are 1.57 times unity power factor. Larger generators and transformers are required. Low lagging power factor causes a large voltage drop, hence ... will have to carry more current at low power factor. This requires a large conductor size.

In an induction machine, if the air gap increased a) Speed will be reduced b) Efficiency will be improved c) Power factor will be lowered d) Breakdown torque will be reduced

Description : In an induction machine, if the air gap increased a) Speed will be reduced b) Efficiency will be improved c) Power factor will be lowered d) Breakdown torque will be reduced

Last Answer : Ans: Power factor will be lowered

The introduction of interpoles in between the main pole improves the performance of d.c. machines, because (A) The interpole produces additional flux to augment the developed torque. (B) The flux waveform is improved with reduction in harmonics. (C) The inequality of air flux on the top and bottom halves of armature is removed. (D) A counter e.m.f. is induced in the coil undergoing commutation.

Description : The introduction of interpoles in between the main pole improves the performance of d.c. machines, because (A) The interpole produces additional flux to augment the developed torque. (B) The flux waveform is ... armature is removed. (D) A counter e.m.f. is induced in the coil undergoing commutation.

Last Answer : Ans: D Counter e.m.f is produced, it neutralizes the reactive emf.

What are good Boulder Stroke & Stride Series stability running shoes and are they expensive?

Description : What are good Boulder Stroke & Stride Series stability running shoes and are they expensive?

Last Answer : The Boulder Stroke and Stride series is not a shoe in fact it is a race for beginning runners,even though there is not a specific shoe for it,the winner will receive a pair of ZOOT running shoes.Good Luck!