Too much fineness of cement
(a) Results cracks in concrete
(b) Generates greater heat
(c) Develops later strength
(d) All the above

1 Answer

Answer :

(d) All the above

Related questions

Description : Strength of concrete increases with (A) Increase in water-cement ratio (B) Increase in fineness of cement (C) Decrease in curing time (D) Decrease in size of aggregate

Last Answer : (B) Increase in fineness of cement

Description : C.R.R.I. charts are used to obtain a relationship between strength of concrete and (A) Water cement ratio (B) Workability (C) Grading of aggregate (D) Fineness modulus

Last Answer : Answer: Option A

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

Description : Pick up the incorrect statement from the following: (A) Tricalcium silicate (C3S) hydrates rapidly (B) Tricalcium silicate (C3S) generates more heat of hydration (C) Tricalcium silicate (C3S) develops early strength (D) Tricalcium silicate (C3S) has more resistance to sulphate attack

Last Answer : Answer: Option D

Description : Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Last Answer : Answer: Option B

Description : Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Last Answer : Answer: Option B

Description : The factors which effects the design of concrete mix is (a) Fineness modulus (b) Water cement ratio (c) Slump (d) All of these

Last Answer : (d) All of these

Description : Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of ... (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Last Answer : Answer: Option C

Description : The compressive strength of cement should not be less than about 110Kg/cm2 after three days & not less than 170Kg/cm2 after seven days. The fineness of an ordinary cement as determined by turbidimetric method should be about __________ cm2 /gm. (A) 800 (B) 1600 (C) 4000 (D) 8500

Last Answer : (B) 1600

Description : The presence of dicalcium silicate in cement. (a) Hydrates the cement slowly. (b) Generates less heat of hydration. (c) Has more resistance to sulphate attack. (d) All of these

Last Answer : (d) All of these

Description : The presence of tricalcium silicate in cement (a) Hydrates the cement rapidly (b) Generates less heat of hydration. (c) Offer high resistance to sulphate attack (d) All of these

Last Answer : (a) Hydrates the cement rapidly

Description : High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Last Answer : (d) All the above

Description : Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*

Last Answer : d) all the above*

Description : An ordinary Portland cement when tested for its fineness, should not leave any residue on I.S. sieve No. 9, more than (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (B) 10 %

Description : The degree of grinding of cement is called (a) Fineness (b) Soundness (c)Impact value (d) Bulking

Last Answer : (a) Fineness

Description : In fineness test on cement, residue left on I.S. sieve no.9 shall not exceed __________ by weight of the sample of cement [ A ] 5% [ B ] 10% [ C ] 15% [ D ] 20%

Last Answer : [ B ] 10%

Description : Pick up the incorrect statement from the following: (A) Concrete for which preliminary tests are conducted, is called controlled concrete (B) Bulking of sand depends upon the fineness of grains (C) Concrete mix 1 : 6 : 12, is used for mass concrete in piers (D) All the above

Last Answer : Answer: Option D

Description : Vicat apparatus is used for (A) Fineness test (B) Consistency test (C) Test for setting time (D) Test for tensile strength

Last Answer : Answer: Option B

Description : Le-chatelier apparatus is used for [ A ] Fineness test [ B ] Consistency test [ C ] Soundness test [ D ] Compressive strength test

Last Answer : [ C ] Soundness test

Description : A badly mixed cement concrete results in (A) Segregation (B) Bleeding (C) Honey combing (D) None of these

Last Answer : Answer: Option C

Description : Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5 (C) 7.0 (D) 7.5

Last Answer : Answer: Option B

Description : Pick up the incorrect statement from the following. If water cement ratio is (A) Increased, strength of concrete increases (B) Decreased, strength of concrete increases (C) Increased, strength of concrete is not affected (D) None of these

Last Answer : Answer: Option C

Description : Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Last Answer : (D) All the above

Description : For a good concrete (A) Aggregates should be hard and durable (B) Water should be free from organic materials (C) Cement should be sufficient to produce the required strength (D) All the above

Last Answer : Answer: Option D

Description : The condition not applicable to water cement ratio law, is (A) Internal moisture conditions on hydration continue till complete strength is gained (B) Concrete specimens may be tested at any temperature (C) Concrete specimens need be of same age (D) Concrete specimens need be of same size

Last Answer : Answer: Option B

Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) The concrete gains strength due to hydration of cement (B) The concrete does not set at freezing point (C) The strength of concrete increases with its age (D) All the above

Last Answer : Answer: Option D

Description : Workability of concrete mix with low water cement ratio is determined by (A) Tensile strength test (B) Slump test (C) Compaction factor test (D) Flexural strength test

Last Answer : Answer: Option C

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

Description : A concrete using an air entrained cement (A) Has strength less than 10% to 15% (B) Has more resistance to weathering (C) Is more plastic and workable (D) Is free from segregation and bleeding

Last Answer : Answer: Option C

Description : Pick up the incorrect statement from the following: (A) With passage of time, the strength of cement increases (B) With passage of time, the strength of cement decreases (C) After a ... of cement reduces to 50% (D) The concrete made with storage deteriorated cement, gains strength with time

Last Answer : Answer: Option A

Description : Concrete gains strength due to (A) Chemical reaction of cement with sand and coarse aggregates (B) Evaporation of water from concrete (C) Hydration of cement (D) All the above

Last Answer : Answer: Option C

Description : Strength of cement concrete primarily depends upon (A) Quality of water (B) Quantity of aggregate (C) Quantity of cement (D) Water-cement

Last Answer : Answer: Option D

Description : The strength of cement concrete increases with (a) The increase of water cement ratio. (b) The decrease of water cement ratio. (c) The increase of cement ratio (d) None of these

Last Answer : (a) The increase of water cement ratio.

Description : According to the rule of water cement ratio, the strength of concrete wholly depends upon. (a) The quality of cement. (b) The quality of cement mixed with aggregate. (c) The amount of water used in preparation of concrete mix. (d) All of the above

Last Answer : (c) The amount of water used in preparation of concrete mix.

Description : The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Last Answer : (d) All of the above

Description : The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Last Answer : (b) 10 to 15%

Description : High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Last Answer : [ B ] 0.25 to 0.30

Description : Concrete gains strength due to [ A ] Chemical reaction of cement with sand and coarse aggregates [ B ] Evaporation of water from concrete [ C ] Hydration of cement [ D ] All the above

Last Answer : [ C ] Hydration of cement

Description : Select incorrect statement from the following [ A ] With passage of time, the strength of cement decreases [ B ] With passage of time, the strength of cement increases [ C ] After a period ... cement reduces to 50% [ D ] The concrete made with storage deteriorated cement; gains strength with time.

Last Answer : [ B ] With passage of time, the strength of cement increases

Description : Workability of concrete mix with low water cement ratio is determined by [ A ] Tensile strength test [ B ] Slump cone test [ C ] Compaction factor test [ D ] Flexural strength test

Last Answer : [ C ] Compaction factor test

Description : Increase in water content in a cement concrete (i) Increases workability (ii) Increases the strength [ A ] i [ B ] ii [ C ] both (i) and (ii) [ D ] neither (i) nor (ii)

Last Answer : [ A ] i

Description : A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) Sand stones may be divided into calcareous, siliceous and ferruginous sand stones (B) Concrete using sand stones, cracks due to excessive shrinkage (C) Broken bricks produce a concrete having good fire resisting qualities (D) All the above

Last Answer : Answer: Option D

Description : Which of the following statements refer to correct purpose as regards testing of concrete by ultrasonic pulse velocity method? 1. To assess the quality of concrete in-situ. 2. To determine the dynamic modulus of elasticity of concrete. 3 ... and 2 only (b) 1 and 3 only (c) 2 and 3 only (d)1, 2 and 3

Last Answer : (d)1, 2 and 3

Description : The lower water cement ratio in concrete, introduces (A) Smaller creep and shrinkage (B) Greater density and smaller permeability (C) Improved frost resistance (D) All the above

Last Answer : Answer: Option D

Description : Explain the procedure to determine fineness of cement by dry sieving method. State its IS requirement.

Last Answer : Procedure to determine fineness of cement by dry sieving method: 1. Take the 100 gm of cement sample given using balance as initial weight as W1 gm. 2. Take 90 micron IS sieve and keep pan at bottom. 3. Place the ... . ii) Rapid hardening Cement (RHC): 5 % max. iii) Low Heat Cement (LHC): 5 % max.

Description : Define fineness of cement.

Last Answer : Fineness of cement: It is the degree of grinding of cement particles during its manufacturing process, called as fineness of cement.  OR  It is the measurement of size of particles, called as fineness of cement. 

Description : Dry rot (A) Cracks the timber (B) Reduces the strength of timber (C) Reduces the timber to powder (D) Spoils the appearance of timber

Last Answer : Answer: Option C

Description : As per IS:456, the strength of concrete sample is less than [ A ] The characteristic strength minus 1.35times the standard deviation [ B ] 0.80 times the characteristic strength [ C ] Greater of (a) and (b) [ D ] None of the above

Last Answer : [ C ] Greater of (a) and (b)