The blast furnace gas is a byproduct in the production of pig iron in the blast furnace.  A. Yes  B. No

The blast furnace gas is a byproduct in the production of pig iron in the blast furnace.  A. Yes  B. No
by

1 Answer

Answer :

Answer: A
by

Related questions

Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Description : Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Last Answer : Answer: A

Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Description : Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Last Answer : Answer: A

The heating and expanding of a gas is called thermodynamic system.  A. Yes  B. No

Description : The heating and expanding of a gas is called thermodynamic system.  A. Yes  B. No

Last Answer : Answer: B

The absolute pressure of a given mass of a perfect gas varies inversely as its volume, when the temperature remains constant. This statement is known as Charles’ law.  A. Yes  B. No

Description : The absolute pressure of a given mass of a perfect gas varies inversely as its volume, when the temperature remains constant. This statement is known as Charles’ law.  A. Yes  B. No

Last Answer : Answer: B

Coal gas is obtained by mixing coal and gas at ambient conditions.  A. Yes  B. No

Description : Coal gas is obtained by mixing coal and gas at ambient conditions.  A. Yes  B. No

Last Answer : Answer: B

Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000

Description : Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000

Last Answer : (B) 2000

Liquid fuels have higher calorific value than solid fuels.  A. Yes  B. No

Description : Liquid fuels have higher calorific value than solid fuels.  A. Yes  B. No

Last Answer : Answer: A

The greater the pressure difference in throttling, the lesser is the irreversibility.  A. Yes  B. No

Description : The greater the pressure difference in throttling, the lesser is the irreversibility.  A. Yes  B. No

Last Answer : Answer: B

A closed system is one in which heat and work crosses the boundary of the system but the mass of the working substance does not crosses the boundary of the system.  A. Yes  B. No

Description : A closed system is one in which heat and work crosses the boundary of the system but the mass of the working substance does not crosses the boundary of the system.  A. Yes  B. No

Last Answer : Answer: A

The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8

Description : The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8

Last Answer : (C) 4

Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Description : Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Last Answer : (B) 3

Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Last Answer : Option A

Volume of blast furnace slag is about __________ times the volume of hot metal (pig iron) of the same weight (A) 1.5 (B) 3 (C) 5

Description : Volume of blast furnace slag is about __________ times the volume of hot metal (pig iron) of the same weight (A) 1.5 (B) 3 (C) 5

Last Answer : Option B

What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Description : What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Last Answer : Overall efficiency

Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low temperature source to high temperature source  (d) a machine that continuously creates its own energy  (e) production of energy by temperature differential in sea water at different levels.

Description : Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low ... its own energy  (e) production of energy by temperature differential in sea water at different levels.

Last Answer : Answer : d

An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Description : An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Last Answer : increases

The gas in a constant gas thermometer cooled to absolute zero would have _________.  a. no volume  b. no pressure  c. zero temperature at all scales  d. none of the above

Description : The gas in a constant gas thermometer cooled to absolute zero would have _________.  a. no volume  b. no pressure  c. zero temperature at all scales  d. none of the above

Last Answer : no pressure

_________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Description : _________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Last Answer : Sublimation

Which of the following statements is TRUE for an ideal gas, but not for a real gas?  A. PV = nRT  B. An increase in temperature causes an increase in the kinetic energy of the gas  C. The total volume of molecules on a gas is nearly the same as the volume of the gas as a whole  D. No attractive forces exists between the molecule of a gas

Description : Which of the following statements is TRUE for an ideal gas, but not for a real gas?  A. PV = nRT  B. An increase in temperature causes an increase in the kinetic energy of the gas  C. The ... same as the volume of the gas as a whole  D. No attractive forces exists between the molecule of a gas

Last Answer : PV = nRT

An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Description : An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Last Answer : Answer: D

Which law states that the specific heat of a gas remains constant at all temperatures and pressures  (a) Charles’ Law  (b) Joule’s Law  (c) Regnault’s Law  (d) Boyle’s Law  (e) there is no such law.

Description : Which law states that the specific heat of a gas remains constant at all temperatures and pressures  (a) Charles’ Law  (b) Joule’s Law  (c) Regnault’s Law  (d) Boyle’s Law  (e) there is no such law.

Last Answer : Answer : c

Which law states that the internal energy of a gas is a function of temperature  (a) Charles’ law  (b) Joule’s law  (c) Regnault’s law  (d) Boyle’s law  (e) there is no such law.

Description : Which law states that the internal energy of a gas is a function of temperature  (a) Charles’ law  (b) Joule’s law  (c) Regnault’s law  (d) Boyle’s law  (e) there is no such law.

Last Answer : Answer : b

An ideal gas as compared to a real gas at very high pressure occupies  (a) more volume  (b) less volume  (c) same volume  (d) unpredictable behaviour  (e) no such correlation.

Description : An ideal gas as compared to a real gas at very high pressure occupies  (a) more volume  (b) less volume  (c) same volume  (d) unpredictable behaviour  (e) no such correlation.

Last Answer : Answer : a

Which is the main reducing agent during production of iron from iron ore in a blast furnace? (A) C (B) CO (C) CO2 (D) H2

Description : Which is the main reducing agent during production of iron from iron ore in a blast furnace? (A) C (B) CO (C) CO2 (D) H2

Last Answer : (B) CO

An arc blast is the byproduct of an arc fault and it produces a massive pressure wave which is dangerous as the arc flash.?

Description : An arc blast is the byproduct of an arc fault and it produces a massive pressure wave which is dangerous as the arc flash.?

Last Answer : True.

It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Description : It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Last Answer : Brayton Cycle

The volume of a gas is directly proportional to the number of molecules of the gas.  a. Ideal gas law  b. Boyle-Mariotte Law  c. Avogadro’s Hypothesis  d. Gay-Lussac’s Law of combining Volumes

Description : The volume of a gas is directly proportional to the number of molecules of the gas.  a. Ideal gas law  b. Boyle-Mariotte Law  c. Avogadro’s Hypothesis  d. Gay-Lussac’s Law of combining Volumes

Last Answer : Avogadro’s Hypothesis

The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Description : The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Last Answer : Loschmidt number

The volume of a gas under constant pressure increases or decrease with temperature.  a. Gay- Lussac’s Law  b. Ideal Gas Law  c. Charles’ Law  d. Boyle’s Law

Description : The volume of a gas under constant pressure increases or decrease with temperature.  a. Gay- Lussac’s Law  b. Ideal Gas Law  c. Charles’ Law  d. Boyle’s Law

Last Answer : Charles’ Law

A law relating the pressure, temperature and volume of an ideal gas  a. Gay-Lussac’s Law  b. Ideal gas Law  c. Charles’ Law  d. Boyle’s Law

Description : A law relating the pressure, temperature and volume of an ideal gas  a. Gay-Lussac’s Law  b. Ideal gas Law  c. Charles’ Law  d. Boyle’s Law

Last Answer : Ideal gas Law

The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Description : The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Last Answer : Latent Heat of Vaporization

Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Description : Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Last Answer : Gasoline engine

Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Description : Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Last Answer : Carnot engine

Which of the following is least efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Description : Which of the following is least efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Last Answer : Gasoline engine

Which of the following cannot be a property of a gas?  a. density  b. pressure  c. viscosity  d. temperature

Description : Which of the following cannot be a property of a gas?  a. density  b. pressure  c. viscosity  d. temperature

Last Answer : viscosity

Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Description : Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Last Answer : Randomness or disorder

An ideal gas is compresses isothermally. The enthalpy change is  a. Always negative  b. Always positive  c. zero  d. undefined

Description : An ideal gas is compresses isothermally. The enthalpy change is  a. Always negative  b. Always positive  c. zero  d. undefined

Last Answer : zero

When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called  a. reversible  b. adiabatic  c. polytropic  d. isothermal

Description : When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called  a. reversible  b. adiabatic  c. polytropic  d. isothermal

Last Answer : adiabatic

When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called;  a. Isometric process  b. Isothermal process  c. Isobaric process  d. Adiabatic process

Description : When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called;  a. Isometric process  b. Isothermal process  c. Isobaric process  d. Adiabatic process

Last Answer : Adiabatic process

If the initial volume of an ideal gas is compressed to one-half its original volume and to twice its original temperature, the pressure:  a. doubles  b. halves  c. quadruples  d. triples

Description : If the initial volume of an ideal gas is compressed to one-half its original volume and to twice its original temperature, the pressure:  a. doubles  b. halves  c. quadruples  d. triples

Last Answer : quadruples

Which of the following events is heat exchange involved?  a. when there is a phase change  b. when there is a chemical reaction  c. when the gas expands adiabatically  d. when there is difference in temperature

Description : Which of the following events is heat exchange involved?  a. when there is a phase change  b. when there is a chemical reaction  c. when the gas expands adiabatically  d. when there is difference in temperature

Last Answer : when the gas expands adiabatically

What Law states that the pressure of gas is inversely proportional to its volume at constant temperature?  a. Charles’ law  b. Gay-Lussac’s Law  c. Boyle’s Law  d. Dalton’s Law

Description : What Law states that the pressure of gas is inversely proportional to its volume at constant temperature?  a. Charles’ law  b. Gay-Lussac’s Law  c. Boyle’s Law  d. Dalton’s Law

Last Answer : Boyle’s Law

To what conditions does a gas behave like an ideal gas?  a. low temperature and low pressure  b. low temperature and high pressure  c. high temperature and low pressure  d. high temperature and high pressure

Description : To what conditions does a gas behave like an ideal gas?  a. low temperature and low pressure  b. low temperature and high pressure  c. high temperature and low pressure  d. high temperature and high pressure

Last Answer : high temperature and low pressure

Which of the following compressibility factor of ideal gas  a. 1  b. 2  c. 1.5  d. 0

Description : Which of the following compressibility factor of ideal gas  a. 1  b. 2  c. 1.5  d. 0

Last Answer : 1

The compression of the gas in two or more cylinders in place of a single cylinder compressor  a. Single Staging  b. Double Staging  c. Multistaging  d. None of the above

Description : The compression of the gas in two or more cylinders in place of a single cylinder compressor  a. Single Staging  b. Double Staging  c. Multistaging  d. None of the above

Last Answer : Multistaging

The volume of a confined gas is held constant, the pressure is directly proportional to the absolute temperature.  a. Charle’s Law  b. Boyle’s Law  c. Joule’s Law  d. Specific Heat

Description : The volume of a confined gas is held constant, the pressure is directly proportional to the absolute temperature.  a. Charle’s Law  b. Boyle’s Law  c. Joule’s Law  d. Specific Heat

Last Answer : Boyle’s Law

A Thermodynamic Term That refers to any fixed region in a space  a. Control Volume  b. Volume  c. Density  d. Natural Gas

Description : A Thermodynamic Term That refers to any fixed region in a space  a. Control Volume  b. Volume  c. Density  d. Natural Gas

Last Answer : Control Volume

Regardless of the process, the change in enthalpy firm moles of ideal gas is  a. Heat  b. Enthalpy  c. Entropy  d. Density

Description : Regardless of the process, the change in enthalpy firm moles of ideal gas is  a. Heat  b. Enthalpy  c. Entropy  d. Density

Last Answer : Heat

The pressure of the confined gas is held constant, the volume directly proportional to the absolute temperature.  a. Charle’s Law  b. Boyle’s Law  c. Zeroth Law  d. Gas Law

Description : The pressure of the confined gas is held constant, the volume directly proportional to the absolute temperature.  a. Charle’s Law  b. Boyle’s Law  c. Zeroth Law  d. Gas Law

Last Answer : Charle’s Law

The Law of Thermodynamics that provides the basis for measuring the thermodynamic property of temperature.  a. Charle’s Law  b. Boyle’s Law  c. Zeroth Law  d. Gas Law

Description : The Law of Thermodynamics that provides the basis for measuring the thermodynamic property of temperature.  a. Charle’s Law  b. Boyle’s Law  c. Zeroth Law  d. Gas Law

Last Answer : Zeroth Law