Description : Gas yield in the Kopper-Totzek coal gasifier is about __________ Nm3 /ton coal (ash = 35%). (A) 150 (B) 1500 (C) 3500 (D) 5000
Last Answer : (C) 3500
Description : Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750
Last Answer : (B) 160
Description : Quantity of coke oven gas produced by high temperature carbonisation of one ton of dry coal may be around __________ Nm3 . (A) 30 (B) 300 (C) 3,000 (D) 30,000
Last Answer : (B) 300
Description : Dust content in raw blast furnace gas is about __________ gm/Nm3 ; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use. (A) 15-30 (B) 1-2 (C) 70-100 (D) 150-200
Last Answer : (A) 15-30
Description : Calorific value of blast furnace gas is around __________ KCal/Nm3 . (A) 850 (B) 1800 (C) 4200 (D) 6500
Last Answer : (A) 850
Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil
Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point
Description : In low temperature carbonisation of coal, the (A) Yield of coke oven gas is 290 Nm3 /ton dry coal (B) Volatile matter in coke is zero (C) Temperature maintained is 700°C (D) Yield of tar is about 3% of dry coal
Last Answer : (C) Temperature maintained is 700°C
Description : The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8
Last Answer : (C) 4
Description : Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6
Last Answer : (B) 3
Description : Volume of blast furnace slag is about __________ times the volume of hot metal (pig iron) of the same weight (A) 1.5 (B) 3 (C) 5
Last Answer : Option B
Description : Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas
Last Answer : (A) Blast furnace gas
Description : Which of the following will generate maximum volume of product of complete combustion (Nm3 /Nm3 of fuel)? (A) Carburetted water gas (B) Blast furnace gas (C) Natural gas (D) Producers' gas
Last Answer : (C) Natural gas
Description : Which of the following fuel gases will require maximum amount of air for combustion of 1 Nm3 gas? (A) Blast furnace gas (B) Natural gas (C) Producer gas (D) Water gas
Last Answer : (B) Natural gas
Description : The blast furnace gas is a byproduct in the production of pig iron in the blast furnace. A. Yes B. No
Last Answer : Answer: A
Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity
Last Answer : Option A
Description : The calorific value of L.D. converter gas is about __________ Kcal/Nm3 . (A) 1800 (B) 800 (C) 4500 (D) 10000
Last Answer : (A) 1800
Description : Calorific value of coke even gas produced by low temperature carbonisation of coal is about __________ Kcal/Nm3 . (A) 4000 (B) 2500 (C) 6500 (D) 10000
Last Answer : (C) 6500
Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )
Last Answer : a) Specific Energy Consumption of Induction Melting Furnace Molten Steel Production from the Induction melting furnace per day = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE = 655864000/107 = 65.586 ToE
Description : The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300
Last Answer : (B) 400 - 700
Description : Production of one ton of paper in Indian paper industry consumes about __________ kWh of electricity. (A) 300 (B) 800 (C) 1400 (D) 2000
Last Answer : (C) 1400
Description : The approximate height of a blast furnace having a useful volume of 2000 m3is about __________ metres (A) 25 (B) 35 (C) 55 (D) 75
Last Answer : (C) 55
Description : Pick out the wrong statement. (A) Main constituents of LPG are propane and butane (B) C.V. of natural gas is about 10000 KCal/Nm3 (C) C.V. of LPG is about 26000 kcal/Nm3 (11500 kcal/kg) (D) L.P.G. is lighter than air
Last Answer : (D) L.P.G. is lighter than air
Description : Calorific value of coke oven gas is around __________ Kcal/Nm3 . (A) 900 (B) 4200 (C) 7500 (D) 2000
Last Answer : (B) 4200
Description : The calorific value of 'LPG' (50% propane + 50% butane) is about __________ kcal/Nm3 . (A) 5000 (B) 25,000 (C) 10,000 (D) 15,000
Last Answer : (B) 25,000
Description : In 70 kg patient one unit of platelet concentrate should increase platelet count A. 2000 - 5000 mm3 B. 5000 - 10000 mm3 C. 10000 - 20000 mm3 D. More than 20000 mm3
Last Answer : Ans: B
Description : The temperature in the calcium carbide furnace is __________ °C. (A) 200-300 (B) 700-850 (C) 2000-2200 (D) 4000-4500
Last Answer : (C) 2000-2200
Description : __________ atmosphere is maintained inside an iron blast furnace. (A) Oxidising (B) Reducing (C) Inert (D) Decarburising
Last Answer : (B) Reducing
Description : __________ is used as a flux in the extraction of iron from iron ore (haematite) in blast furnace. (A) Bauxite (B) Limestone (C) Quartz (D) Manganese
Last Answer : (B) Limestone
Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material
Last Answer : Option C
Description : Pig iron is produced by blast furnaces in India using mostly the iron ore named (A) Hematite (B) Magnetite (C) Siderite (D) Chalcopyrite
Last Answer : (A) Hematite
Description : A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000
Last Answer : (D) 10000 to 100000
Description : Ethyl mercaptan is added to the Doctor negative LPG for facilitating the detection of its leakage (by bad odour) to the extent of about __________ ppm. (A) 1 (B) 50 (C) 5000 (D) 10000
Last Answer : (B) 50
Description : Tolerable concentration of toxic carbon monoxide in atmospheric air is about __________ ppm. (A) 50 (B) 1000 (C) 5000 (D) 10000
Last Answer : (A) 50
Description : Explosion limit of blast furnace gas is 37 to 71% gas in gas-air mixture. It means that the blast furnace gas will explode when burnt in a confined space, if its concentration in the gas-air mixture is __________ percent. (A) < 37% (B) > 71% (C) In between 37 & 71% (D) None of these
Last Answer : (C) In between 37 & 71%
Description : Blast furnace gas is a very poisonous gas because of its predominantly high __________ content. (A) H2O (B) CO2 (C) CO (D) CH4
Last Answer : (C) CO
Description : Statement-1:Cast iron is different from pig iron. Statement-2: Cast iron is made by melting pig iron with scrap iron and coke using hot air blast and
Last Answer : Statement-1:Cast iron is different from pig iron. Statement-2: Cast iron is made by melting pig ... Statement-1 is false but Statement -2 is true
Description : The cooling rate required to freeze 1 ton of water at 0°C into ice at 0°C in 24 hours is __________ BTU/hr. (A) 100 (B) 200 (C) 1000 (D) 2000
Last Answer : (B) 200
Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore
Last Answer : (C) Manufacture of carbon electrode
Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these
Last Answer : (B) Skip hoist
Description : Main use of hard coke produced by high temperature carbonisation is in the (A) Iron blast furnace (B) Cupola in foundries (C) Sinter making (D) Domestic ovens
Last Answer : (A) Iron blast furnace
Description : Which is the main reducing agent during production of iron from iron ore in a blast furnace? (A) C (B) CO (C) CO2 (D) H2
Last Answer : (B) CO
Description : The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore
Last Answer : Limestone, coke & iron ore
Description : Which of the following contributes maximum as main source of sulphur in the blast furnace charge? (A) Sinter (B) Coke (C) Iron ore (D) Limestone
Last Answer : Coke
Description : The main reducing agent in iron blast furnace is(A) Carbon dioxide (B) Carbon monoxide (C) Oxygen (D) Air
Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80
Last Answer : (D) 80
Description : Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (A) Regenerative
Description : Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100
Last Answer : (A) 25-80
Description : Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80
Description : Main use of soft coke is as __________ fuel. (A) Domestic (B) Blast furnace (C) Foundry (D) None of these
Last Answer : (A) Domestic
Description : Waste/polluted water discharged from electroplating, blast furnace and coal mining industries contain mainly __________ substances. (A) Radioactive (B) Organic (C) Inorganic (D) None of these
Last Answer : (C) Inorganic