Which of the engine is used for fighter bombers?  a. Turbojet  b. Pulsejet  c. Rockets  d. Ramjet

Which of the engine is used for
fighter bombers?
 a. Turbojet
 b. Pulsejet
 c. Rockets
 d. Ramjet
by

1 Answer

Answer :

Turbojet
by

Related questions

What was notable about the Tuskegee airmen an African American fighter unit that was escorted bombers on their attacks?

Description : What was notable about the Tuskegee airmen an African American fighter unit that was escorted bombers on their attacks?

Last Answer : The Tuskegee Airmen did not lose a single bomber to enemy firein any mission

What was notable about the Tuskegee airmen an African American fighter unit that was escorted bombers on their attacks?

Description : What was notable about the Tuskegee airmen an African American fighter unit that was escorted bombers on their attacks?

Last Answer : The Tuskegee Airmen did not lose a single bomber to enemy firein any mission

It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Description : It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Last Answer : Thrust

Executes the entire cycle in just two strokes the power stroke and the compression stroke.  a. One-stroke engine  b. Two-stroke engine  c. Four-stroke engine  d. Eight-stroke engine

Description : Executes the entire cycle in just two strokes the power stroke and the compression stroke.  a. One-stroke engine  b. Two-stroke engine  c. Four-stroke engine  d. Eight-stroke engine

Last Answer : Two-stroke engine

Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Description : Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Last Answer : Gasoline engine

Which of the following thermodynamic devices operates the reverse of the heat engine?  a. Thermal pump  b. Thermal evaporator  c. Thermal condenser  d. Thermal equilibrant

Description : Which of the following thermodynamic devices operates the reverse of the heat engine?  a. Thermal pump  b. Thermal evaporator  c. Thermal condenser  d. Thermal equilibrant

Last Answer : Thermal pump

Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Description : Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Last Answer : Carnot engine

Which of the following is least efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Description : Which of the following is least efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Last Answer : Gasoline engine

A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is the partial pressure of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Description : A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is ... of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Last Answer : 84.6

Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Description : Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Last Answer : External combustion engine

Is a thermodynamic system that operates continuously with only energy (heat and work) crossing its boundaries?  a. Heat Engine  b. Heat Reservoir  c. Heat Source  d. Heat Sink

Description : Is a thermodynamic system that operates continuously with only energy (heat and work) crossing its boundaries?  a. Heat Engine  b. Heat Reservoir  c. Heat Source  d. Heat Sink

Last Answer : Heat Engine

Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Description : Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Last Answer : Internal Combustion Engine

Amount of heat needed to rate the temperature of a substance by 1°C  a. Heat Exchange  b. Heat Engine  c. Specific Heat  d. None of the above

Description : Amount of heat needed to rate the temperature of a substance by 1°C  a. Heat Exchange  b. Heat Engine  c. Specific Heat  d. None of the above

Last Answer : Specific Heat

A simple steam engine receives steam from the boiler at 180˚C and exhausts directly into the air at 100˚C. What is the upper limit of its efficiency?  a. 11.28 %  b. 36.77 %  c. 20.36 %  d. 17.66 %

Description : A simple steam engine receives steam from the boiler at 180˚C and exhausts directly into the air at 100˚C. What is the upper limit of its efficiency?  a. 11.28 %  b. 36.77 %  c. 20.36 %  d. 17.66 %

Last Answer : 17.66 %

For heat engine operating between two temperatures (T1>T2), what is the maximum efficiency attainable?  A. Eff = 1 – (T2/T1)  B. Eff = 1 - (T1/T2)  C. Eff = T1 - T2  D. Eff = 1 - (T2/T1)^2

Description : For heat engine operating between two temperatures (T1>T2), what is the maximum efficiency attainable?  A. Eff = 1 – (T2/T1)  B. Eff = 1 - (T1/T2)  C. Eff = T1 - T2  D. Eff = 1 - (T2/T1)^2

Last Answer : Eff = 1 – (T2/T1)

What states that thermal efficiencies of all reversible heat engines operating between the same two reservoirs are the same and that no heat engine is more efficient than a reversible one operating between the same two reservoirs?  A. Ericson principle  B. Carnot principle  C. Otto principle  D. Stirling principle

Description : What states that thermal efficiencies of all reversible heat engines operating between the same two reservoirs are the same and that no heat engine is more efficient than a reversible one operating between the ... A. Ericson principle  B. Carnot principle  C. Otto principle  D. Stirling principle

Last Answer : Carnot principle

What is a heat engine that operates on the reversible Carnot cycle called?  A. Carnot heat engine  B. Ideal heat engine  C. Most efficient heat engine  D. Best heat engine

Description : What is a heat engine that operates on the reversible Carnot cycle called?  A. Carnot heat engine  B. Ideal heat engine  C. Most efficient heat engine  D. Best heat engine

Last Answer : Carnot heat engine

What is the highest efficiency of heat engine operating between the two thermal energy reservoirs at temperature limits?  A. Ericson efficiency  B. Otto efficiency  C. Carnot efficiency  D. Stirling efficiency

Description : What is the highest efficiency of heat engine operating between the two thermal energy reservoirs at temperature limits?  A. Ericson efficiency  B. Otto efficiency  C. Carnot efficiency  D. Stirling efficiency

Last Answer : Carnot efficiency

The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Description : The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Last Answer : Answer : e

The efficiency of a Carnot engine depends on  (a) working substance  (b) design of engine  (c) size of engine  (d) type of fuel fired  (e) temperatures of source and sink.

Description : The efficiency of a Carnot engine depends on  (a) working substance  (b) design of engine  (c) size of engine  (d) type of fuel fired  (e) temperatures of source and sink.

Last Answer : Answer : e

A manufacturer claims to have a heat engine capable of developing 20 h.p. by receiving heat input of 400 kcal/mt and working between the temperature limits of 227° C and 27° C. His claim is  (a) justified  (b) not possible  (c) may be possible with lot of sophistications  (d) cost will be very high  (e) theroretically possible.

Description : A manufacturer claims to have a heat engine capable of developing 20 h.p. by receiving heat input of 400 kcal/mt and working between the temperature limits of 227° C and 27° C. His claim is  ( ... be possible with lot of sophistications  (d) cost will be very high  (e) theroretically possible.

Last Answer : Answer : b

An actual engine is to be designed having same efficiency as the Carnot cycle. Such a proposition is  (a) feasible  (b) impossible  (c) possible  (d) possible, but with lot of sophistications  (e) desirable.

Description : An actual engine is to be designed having same efficiency as the Carnot cycle. Such a proposition is  (a) feasible  (b) impossible  (c) possible  (d) possible, but with lot of sophistications  (e) desirable.

Last Answer : Answer : d

Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low temperature source to high temperature source  (d) a machine that continuously creates its own energy  (e) production of energy by temperature differential in sea water at different levels.

Description : Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low ... its own energy  (e) production of energy by temperature differential in sea water at different levels.

Last Answer : Answer : d

An engine operates between temperatures of 900°Kandr2 and another engine between T2 and 400°K For both to do equal work, value of T2 will be  (a) 650°K  (b) 600°K  (c) 625°K  (d) 700°K  (e) 750°K.

Description : An engine operates between temperatures of 900°Kandr2 and another engine between T2 and 400°K For both to do equal work, value of T2 will be  (a) 650°K  (b) 600°K  (c) 625°K  (d) 700°K  (e) 750°K.

Last Answer : Answer : a

Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Description : Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Last Answer : Answer : d

Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Description : Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Last Answer : Answer : a

According to first law of thermodynamics  (a) mass and energy are mutually convertible  (b) Carnot engine is most efficient  (c) heat and work are mutually convertible  (d) mass and light are mutually convertible  (e) heat flows from hot substance to cold substance.

Description : According to first law of thermodynamics  (a) mass and energy are mutually convertible  (b) Carnot engine is most efficient  (c) heat and work are mutually convertible  (d) mass and light are mutually convertible  (e) heat flows from hot substance to cold substance.

Last Answer : Answer : c

The more effective way of increasing efficiency of Carnot engine is to  (a) increase higher temperature  (b) decrease higher temperature  (c) increase lower temperature  (d) decrease lower temperature  (e) keep lower temperature constant.

Description : The more effective way of increasing efficiency of Carnot engine is to  (a) increase higher temperature  (b) decrease higher temperature  (c) increase lower temperature  (d) decrease lower temperature  (e) keep lower temperature constant.

Last Answer : Answer : d

the main purpose of the turbine in the turbojet engine is to -General Knowledge

Description : the main purpose of the turbine in the turbojet engine is to -General Knowledge

Last Answer : The main purpose of the turbine in the turbojet engine is to Drive the compressor.

At the alternate aerodrome, the commander of a turbojet engine aeroplane should have a fuel quantity (final reserve) sufficient for flying during: a. 30 minutes at holding flight speed at 1,500 ft b. 45 minutes at holding flight speed at 1,500 ft c. 30 minutes at cruising speed d. 45 minutes at cruising speed

Description : At the alternate aerodrome, the commander of a turbojet engine aeroplane should have a fuel quantity (final reserve) sufficient for flying during: a. 30 minutes at holding flight speed at 1,500 ft b. 45 ... speed at 1,500 ft c. 30 minutes at cruising speed d. 45 minutes at cruising speed

Last Answer : a. 30 minutes at holding flight speed at 1,500 ft

Describe the working of Turbojet Engine

Description : Describe the working of Turbojet Engine

Last Answer : Turbojet Engine OR Working :Turbo-jet engine consists of diffuser, compressor, combustion chamber turbine and nozzle. At entrance air diffuser causes rise in pressure in entering air ... and thrust of propulsion is produced. The velocity in the nozzle is grater then flight velocity.

Which of the following laws of thermodynamic which leads to the definition of entropy?  a. First law  b. Second law  c. Third law  d. Law of conservation of energy

Description : Which of the following laws of thermodynamic which leads to the definition of entropy?  a. First law  b. Second law  c. Third law  d. Law of conservation of energy

Last Answer : Second law

It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Description : It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Last Answer : Brayton Cycle

The Science of Energy  a. Thermionics  b. Kinetics  c. Thermodynamics  d. Geophysics

Description : The Science of Energy  a. Thermionics  b. Kinetics  c. Thermodynamics  d. Geophysics

Last Answer : Thermodynamics

Energy can neither created nor destroyed. It can only change forms.  a. Conservation of Mass Principle  b. Conservation of Energy Principle  c. Conservation of Momentum Principle  d. Conservation of Heat Principle

Description : Energy can neither created nor destroyed. It can only change forms.  a. Conservation of Mass Principle  b. Conservation of Energy Principle  c. Conservation of Momentum Principle  d. Conservation of Heat Principle

Last Answer : Conservation of Energy Principle

The rate at which this is quantity passes through a fixed boundary per unit time  a. Flux  b. Existence  c. Irradiance  d. All of these

Description : The rate at which this is quantity passes through a fixed boundary per unit time  a. Flux  b. Existence  c. Irradiance  d. All of these

Last Answer : All of these

Diffusion due to thermal motion is called  a. dilation  b. infusion  c. effusion  d. dispersion

Description : Diffusion due to thermal motion is called  a. dilation  b. infusion  c. effusion  d. dispersion

Last Answer : effusion

It is a process during which the pressure remains constant  a. Adiabatic  b. Isentropic  c. Isobaric  d. Isotropic

Description : It is a process during which the pressure remains constant  a. Adiabatic  b. Isentropic  c. Isobaric  d. Isotropic

Last Answer : Isobaric

It is the deposition of radiant energy as heat into an absorbing body.  a. Radiation  b. Ionization  c. Convection  d. Insolation

Description : It is the deposition of radiant energy as heat into an absorbing body.  a. Radiation  b. Ionization  c. Convection  d. Insolation

Last Answer : Insolation

A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Description : A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Last Answer : 130.08 {(10atm)(10)(32)/(0.0821) (300K)}

This law of thermodynamics prohibits the construction of a perpetual motion machine “of the second kind”  a. Zeroth Law of Thermodynamics  b. First Law of Thermodynamics  c. Second Law of Thermodynamics  d. Third Law of Thermodynamics

Description : This law of thermodynamics prohibits the construction of a perpetual motion machine “of the second kind”  a. Zeroth Law of Thermodynamics  b. First Law of Thermodynamics  c. Second Law of Thermodynamics  d. Third Law of Thermodynamics

Last Answer : Second Law of Thermodynamics

It is the intensity of a radiating source.  a. Specific Brightness  b. Radiance  c. Surface Brightness  d. All of these

Description : It is the intensity of a radiating source.  a. Specific Brightness  b. Radiance  c. Surface Brightness  d. All of these

Last Answer : All of these

For a body cooling in a draft, the rate of heat loss is proportional to the difference in temperature between the body and its surroundings.  a. Nemst Effect  b. Caloric Theory  c. Joule’s Law  d. Newton’s Law of Cooling

Description : For a body cooling in a draft, the rate of heat loss is proportional to the difference in temperature between the body and its surroundings.  a. Nemst Effect  b. Caloric Theory  c. Joule’s Law  d. Newton’s Law of Cooling

Last Answer : Newton’s Law of Cooling

The volume of a gas is directly proportional to the number of molecules of the gas.  a. Ideal gas law  b. Boyle-Mariotte Law  c. Avogadro’s Hypothesis  d. Gay-Lussac’s Law of combining Volumes

Description : The volume of a gas is directly proportional to the number of molecules of the gas.  a. Ideal gas law  b. Boyle-Mariotte Law  c. Avogadro’s Hypothesis  d. Gay-Lussac’s Law of combining Volumes

Last Answer : Avogadro’s Hypothesis

The theory that heat consisted of a fluid, which could be transferred from one body to another, but not “created” or “destroyed”.  a. Clausius Theorem  b. Caloric Theory  c. Joules Law  d. Newton’s Law of cooling

Description : The theory that heat consisted of a fluid, which could be transferred from one body to another, but not “created” or “destroyed”.  a. Clausius Theorem  b. Caloric Theory  c. Joules Law  d. Newton’s Law of cooling

Last Answer : Caloric Theory

At Equilibrium, the radiation emitted must equal the radiation absorbed.  a. Boyle’s Law  b. Planck’s Law  c. Kirchoff’s Law  d. Joule’s Law

Description : At Equilibrium, the radiation emitted must equal the radiation absorbed.  a. Boyle’s Law  b. Planck’s Law  c. Kirchoff’s Law  d. Joule’s Law

Last Answer : Kirchoff’s Law

The radiation emitted by a body as a result of its temperature.  a. Blackbody Radiation  b. Thermal Inversion  c. Thermionic Inversion  d. Thermal Radiation

Description : The radiation emitted by a body as a result of its temperature.  a. Blackbody Radiation  b. Thermal Inversion  c. Thermionic Inversion  d. Thermal Radiation

Last Answer : Thermal Radiation

The thermal radiation emitted by a blackbody heated to a given temperature.  a. Gamma Radiation  b. Black Body Radiation  c. Electromagnetic Radiation  d. Alpha Radiation

Description : The thermal radiation emitted by a blackbody heated to a given temperature.  a. Gamma Radiation  b. Black Body Radiation  c. Electromagnetic Radiation  d. Alpha Radiation

Last Answer : Black Body Radiation