What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

What is the full form of BEE?
A) Basic electrical and electronics. C) Bureau of energy efficiency.
B) Bureau of energy equipment. D) all of the above.
by

1 Answer

Answer :

Bureau of energy efficiency.
by

Related questions

Full form of BEE is ____ A. Basic Electronics and Engineering C. Bureau of Electric Energy B. Bureau of Electric Efficiency D. Bureau of Energy Efficiency

Description : Full form of BEE is ____ A. Basic Electronics and Engineering C. Bureau of Electric Energy B. Bureau of Electric Efficiency D. Bureau of Energy Efficiency

Last Answer : Bureau of Electric Efficiency

Full form of BEE a. Bureau of energy efficient b. Basic electrical and electronics c. Basic thermal engineering d. None of the above.

Description : Full form of BEE a. Bureau of energy efficient b. Basic electrical and electronics c. Basic thermal engineering d. None of the above.

Last Answer : Bureau of energy efficient

To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Description : To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Last Answer : Energy Management 

BEE (in star rating) stand for. A) Bureau of Earth Efficiency . C) Bicycle energy expenditure B) Bureau of Energy Efficiency . D) Bureau of Energy Expenditure

Description : BEE (in star rating) stand for. A) Bureau of Earth Efficiency . C) Bicycle energy expenditure B) Bureau of Energy Efficiency . D) Bureau of Energy Expenditure

Last Answer : Bureau of Energy Efficiency

The Bureau of Energy Efficiency launched a) 2005 c) 2006 b) 2010 d) 2007

Description : The Bureau of Energy Efficiency launched a) 2005 c) 2006 b) 2010 d) 2007

Last Answer : 2006

Bureau of Energy Efficiency was founded on ........ c. 1 March 2001 c) 1 March 2002 d. 4 March 2001 d) 4 March 2002

Description : Bureau of Energy Efficiency was founded on ........ c. 1 March 2001 c) 1 March 2002 d. 4 March 2001 d) 4 March 2002

Last Answer : 1 MARCH 2002

The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Description : The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Last Answer : 2006

BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Description : BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Last Answer : savings in electricity consumption

Choose the correct statement about BEE Star rating label a. Higher the number of stars, greater will be the efficiency b. Lesser the number of stars, greater will be the efficiency c. Higher the number of stars, lesser will be the efficiency d. None of the above

Description : Choose the correct statement about BEE Star rating label a. Higher the number of stars, greater will be the efficiency b. Lesser the number of stars, greater will be the efficiency c. Higher the number of stars, lesser will be the efficiency d. None of the above

Last Answer : Higher the number of stars, greater will be the efficiency

Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Description : Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Last Answer : B. Undergrounding

Basic electrical and electronics engineering practicals for diploma 22310 MSBTE

Description : 1.Determine the permeability of magnetic material by plotting its BH curve 2. Measure voltage, current and power in 1-phase circuit with resistive load. 3. Measure voltage, current and ... .Make Star and Delta connection in induction motor starters and measure the line and phase values.

Last Answer : Practical no. 6 Aim: Make Star and Delta connection in induction motor starters and measure the line and phase values. Apparatus required:  voltmeter, ammeter, induction motor Circuit diagram ... Result: Hence we have measured the line and phase value of star and delta connection.

In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant for the month Paper 1 –Set A with Solutions _______________________ Bureau of Energy Efficiency 6 is ------- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Description : In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant ... ----- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Last Answer : d) 60,000 kWh

The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Description : . The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Last Answer : Energy efficiency RATIO (EER).

What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Description : What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Last Answer : Overall efficiency

_________ has been formulated by Bureau of energy efficient A) star labeling program. B) computer program C) ranking program. D) None of the above.

Description : . _________ has been formulated by Bureau of energy efficient A) star labeling program. B) computer program C) ranking program. D) None of the above.

Last Answer : star labeling program

Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the condition of the bearings C. provide for the correct proper tightening of the field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Description : Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the ... field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Last Answer : Answer: B

State the objective of testing. Explain the role of BIS (Bureau of Indian Standards) in testing of electrical machines.

Description : State the objective of testing. Explain the role of BIS (Bureau of Indian Standards) in testing of electrical machines. 

Last Answer : 1. Objective of testing is to finding error/defects in machine/equipment/ product. 2. To confirm whether the results obtain during testing are within tolerance limits specified by BIS / ISS 3. To ... BIS/ISS specified standards. 5. To avoid in convinces & accidents BIS plays important role.  

As per Energy Conservation Act, 2001, a BEE Certified Energy Manger is required to be appointed/designated by the a) state designated agencies b) all industrial consumers c) designated consumers d) electrical distribution licensees

Description : As per Energy Conservation Act, 2001, a BEE Certified Energy Manger is required to be appointed/designated by the a) state designated agencies b) all industrial consumers c) designated consumers d) electrical distribution licensees

Last Answer : c) designated consumers

Bureau of Indian standards has specified that the total grain loss should not be more than 5% in which broken grain should be less than 2%. a. 3% b. 2.5% d. None of above

Description : Bureau of Indian standards has specified that the total grain loss should not be more than 5% in which broken grain should be less than 2%. a. 3% b. 2.5% d. None of above

Last Answer : Ans-      c. 2%.

The Bureau initiated the standard and labeling program from ___ A. 2006 C. 2009 B. 2008. D. 2010

Description : The Bureau initiated the standard and labeling program from ___ A. 2006 C. 2009 B. 2008. D. 2010

Last Answer : 2006

9. Salient feature of Energy Conservation Act 2001 is (a) establishment of BEE (b) to prescribe energy conservation building codes for all buildings (c) to specify energy consumption (d) both (b) & (c)

Description : Salient feature of Energy Conservation Act 2001 is (a) establishment of BEE (b) to prescribe energy conservation building codes for all buildings (c) to specify energy consumption (d) both (b) & (c)

Last Answer : establishment of BEE 

What organization has published safety guidelines for the maximum limits of RF energy near the human body? A. The American National Standards Institute (ANSI). B. The Environmental Protection Agency (EPA). C. The Federal Communications Commission (FCC). D. The Institute Of Electrical and Electronics Engineers (IEEE).

Description : What organization has published safety guidelines for the maximum limits of RF energy near the human body? A. The American National Standards Institute (ANSI). B. The Environmental Protection ... Communications Commission (FCC). D. The Institute Of Electrical and Electronics Engineers (IEEE).

Last Answer : A. The American National Standards Institute (ANSI).

Full form of ISEER is ______ A. Indian seasonal electric efficiency ratio B. Indian seasonal efficiency energy ratio C. International seasonal efficiency energy ratio D. Indian seasonal energy efficiency ratio

Description : Full form of ISEER is ______ A. Indian seasonal electric efficiency ratio B. Indian seasonal efficiency energy ratio C. International seasonal efficiency energy ratio D. Indian seasonal energy efficiency ratio

Last Answer : Indian seasonal energy efficiency ratio

Full form of EER is _____ A. Energy Electric Ratio C. Energy Efficiency Ratio B. Energy Effective Ratio D. Energy Electron Ratio

Description : Full form of EER is _____ A. Energy Electric Ratio C. Energy Efficiency Ratio B. Energy Effective Ratio D. Energy Electron Ratio

Last Answer : Energy Efficiency Ratio

The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Description : The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Last Answer : Minimum energy performance standards

BEE scheme was launched in....... i. May , 2004. C) May ,2006 ii. April ,2006. D) April , 2004

Description : BEE scheme was launched in....... i. May , 2004. C) May ,2006 ii. April ,2006. D) April , 2004

Last Answer : MAY 2006

The standards and labelings scheme (S&L) is one of the major thurst areas of . a) BEE b) ISEER c) HVAC d) ISO

Description : The standards and labelings scheme (S&L) is one of the major thurst areas of . a) BEE b) ISEER c) HVAC d) ISO

Last Answer : bee

Choose the correct star rating for BEE Star rating label limit a. 1< to 5 c. 1 to 5b. b. 1 to 5> d. None of the above

Description : Choose the correct star rating for BEE Star rating label limit a. 1< to 5 c. 1 to 5b. b. 1 to 5> d. None of the above

Last Answer : 1 to 5

The _______ is aimed at appliances which have a constant usage andconsume more electricity. a. Electricity bill c. BEE Star Rating b. User manual d. Water bill

Description : The _______ is aimed at appliances which have a constant usage andconsume more electricity. a. Electricity bill c. BEE Star Rating b. User manual d. Water bill

Last Answer : BEE Star Rating

Following product have big BEE Star Rating label a. Ceiling fans c. Tube light b. Refrigerator d. Television

Description : Following product have big BEE Star Rating label a. Ceiling fans c. Tube light b. Refrigerator d. Television

Last Answer : Refrigerator

Following product have small BEE Star Rating label a. Refrigerator c. Geysers b. Washing machine d. Ceiling fans

Description : Following product have small BEE Star Rating label a. Refrigerator c. Geysers b. Washing machine d. Ceiling fans

Last Answer : Ceiling fans

For consumers, _______ is helpful as it allows you to calculate the actual money you would spend in electricity bills for that particular product. a. Electricity bill c. BEE Star Rating b. User manual d. Water bill

Description : For consumers, _______ is helpful as it allows you to calculate the actual money you would spend in electricity bills for that particular product. a. Electricity bill c. BEE Star Rating b. User manual d. Water bill

Last Answer : BEE Star Rating

BEE star rating labels show additional information such as a. Product c. brand name b. Product category d. All of the above

Description : BEE star rating labels show additional information such as a. Product c. brand name b. Product category d. All of the above

Last Answer : All of the above

Each and every document submitted to BEE must be ………and …………. A. verified and authorized C. sign and stamp B. registered and uploaded D. verified and uploaded

Description : Each and every document submitted to BEE must be ………and …………. A. verified and authorized C. sign and stamp B. registered and uploaded D. verified and uploaded

Last Answer : sign and stamp

Types of scale used in BEE star rating labels. A) Small. C) Big. B) Both A and C. D) None of the above

Description : Types of scale used in BEE star rating labels. A) Small. C) Big. B) Both A and C. D) None of the above

Last Answer : both A AND C

Appliances need to have BEE star rating label are…… A) Frost free refrigerator. C) Color TV B) Distribution Transformer. D) All of the above

Description : Appliances need to have BEE star rating label are…… A) Frost free refrigerator. C) Color TV B) Distribution Transformer. D) All of the above.

Last Answer : all the above

BEE star rating is solely based on appliance's power .................. A) Consumption. C) Delivery. B) Recovery. D) Rejection.

Description : BEE star rating is solely based on appliance's power .................. A) Consumption. C) Delivery. B) Recovery. D) Rejection.

Last Answer : Consumption.

The models applied to BEE should highlighted in the endorsement__________ sheet A. Endorsement C. Blank B. General. D. None of above

Description : The models applied to BEE should highlighted in the endorsement__________ sheet A. Endorsement C. Blank B. General. D. None of above

Last Answer : Endorsement

The registration for BEE is done in _______ stage A. Three stage. C. Four stage B. Two stage. D. Single stage

Description : The registration for BEE is done in _______ stage A. Three stage. C. Four stage B. Two stage. D. Single stage

Last Answer : Two stage

For each product under S&L scheme, BEE should upload the information on the ____ web portal A. Government C. S&L web portal B. Small scale web D. Private portal

Description : For each product under S&L scheme, BEE should upload the information on the ____ web portal A. Government C. S&L web portal B. Small scale web D. Private portal

Last Answer : S&L web portal

Agreement between BEE and user of label should be done on ₹ 100 _________ stamp paper. A. Judicial stamp paper. C. Court fee stamp paper B. Non judicial paper D. Normal fee paper

Description : Agreement between BEE and user of label should be done on ₹ 100 _________ stamp paper. A. Judicial stamp paper. C. Court fee stamp paper B. Non judicial paper D. Normal fee paper

Last Answer : Non judicial paper

BEE is under of ministry of _________. A) health. B) defense C) power. D) all of the above.

Description : BEE is under of ministry of _________. A) health. B) defense C) power. D) all of the above.

Last Answer : power

BEE under the provisions of the act _______. A. 2000 C) 2001 B. 2002 D) 1999

Description : . BEE under the provisions of the act _______. A. 2000 C) 2001 B. 2002 D) 1999

Last Answer : 2001

Why is copper mainly used in electrical cables, electronics and chemical industries? -SST 10th

Description : Why is copper mainly used in electrical cables, electronics and chemical industries? -SST 10th

Last Answer : Copper is malleable, ductile and a good conductor of electricity. Therefore, it is mainly used in electrical cables, electronics and chemical industries.

IEEE stands for ___________ a) Instantaneous Electrical Engineering b) Institute of Emerging Electrical Engineers c) Institute of Emerging Electronic Engineers d) Institute of Electrical and electronics engineers

Description : IEEE stands for ___________ a) Instantaneous Electrical Engineering b) Institute of Emerging Electrical Engineers c) Institute of Emerging Electronic Engineers d) Institute of Electrical and electronics engineers

Last Answer : Answer: d Explanation: The IEEE is an organization of professionals in the field of electronics and electrical engineering. IEEE has given certain standards of its own which are followed in the field of computer science and electrical engineering

What Is The One Main Difference Between Ups & Inverter ? And Electrical Engineering & Electronics Engineering ?

Description : What Is The One Main Difference Between Ups & Inverter ? And Electrical Engineering & Electronics Engineering ?

Last Answer : uninterrupted power supply is mainly use for short time .me according to ups VA it gives backup. ups is also two types : on line. offline. online ups having high volt and amp for long time backup ... but inverter is start with 2v,24,dc to 36v dc and 20amp to 80amp battery with long time backup.

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering