Why is copper mainly used in electrical cables, electronics and chemical industries? -SST 10th

Why is copper mainly used in electrical cables, electronics and chemical industries? -SST 10th
by

1 Answer

Answer :

Copper is malleable, ductile and a good conductor of electricity. Therefore, it is mainly used in electrical cables, electronics and chemical industries.
by

Related questions

Why is copper mainly used in electrical cables and electronic industries? -SST 10th

Description : Why is copper mainly used in electrical cables and electronic industries? -SST 10th

Last Answer : It is used in electrical cables as it is malleable, ductile and a good conductor of heat and electricity.

The 'sunrise industries' imply - (1) petrochemicals and electronics industry (2) sunflower oil industry (3) computer industry (4) chemical industry

Description : The 'sunrise industries' imply - (1) petrochemicals and electronics industry (2) sunflower oil industry (3) computer industry (4) chemical industry

Last Answer : (1) petrochemicals and electronics industry Explanation: Sunrise Industry is a colloquial term for a sector or business that is in its infancy, but is growing at a rapid pace. A sunrise ... of venture capital funding. A sunrise industry is often characterized by a high degree of innovation.

Sun belt of U.S.A. is important for which one of the following industries? (1) Cotton textile (2) Petro- chemical (3) Hi-tech electronics (4) Food processing

Description : Sun belt of U.S.A. is important for which one of the following industries? (1) Cotton textile (2) Petro- chemical (3) Hi-tech electronics (4) Food processing

Last Answer : (2) Petro- chemical Explanation: The Sun Belt is a region of the United States which became synonymous with the southern third of the nation in the early 1970s when there was a shift ... consumers of their products. The oil industry helped propel southern states such as Texas and Louisiana forward.

The ‘sunrise industries’ imply (1) petrochemicals and electronics industry (2) sunflower oil industry (3) computer industry (4) chemical industry

Description : The ‘sunrise industries’ imply (1) petrochemicals and electronics industry (2) sunflower oil industry (3) computer industry (4) chemical industry

Last Answer :  petrochemicals and electronics industry

Sun belt of U.S.A. is important for which one of the following industries? (1) Cotton textile (2) Petro- chemical (3) Hi-tech electronics (4) Food processing

Description : Sun belt of U.S.A. is important for which one of the following industries? (1) Cotton textile (2) Petro- chemical (3) Hi-tech electronics (4) Food processing 

Last Answer : Petro- chemical

Industries like electronics and biotechnology which are in the forefront of development are called? (1) Sunlight industries (2) Starstruck industries (3) Sunshine industries (4) Sunrise industries

Description : Industries like electronics and biotechnology which are in the forefront of development are called? (1) Sunlight industries (2) Starstruck industries (3) Sunshine industries (4) Sunrise industries

Last Answer : (4) Sunrise industries Explanation: Sunrise industry is a colloquial term for a sector or business that is in its infancy, but is growing at a rapid pace. A sunrise industry is ... sector that is already in decline. So electronics and biotechnology can be characterized as sunrise industries.

The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Description : The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Last Answer : (c) smaller dielectric loss

IEEE stands for ___________ a) Instantaneous Electrical Engineering b) Institute of Emerging Electrical Engineers c) Institute of Emerging Electronic Engineers d) Institute of Electrical and electronics engineers

Description : IEEE stands for ___________ a) Instantaneous Electrical Engineering b) Institute of Emerging Electrical Engineers c) Institute of Emerging Electronic Engineers d) Institute of Electrical and electronics engineers

Last Answer : Answer: d Explanation: The IEEE is an organization of professionals in the field of electronics and electrical engineering. IEEE has given certain standards of its own which are followed in the field of computer science and electrical engineering

What Is The One Main Difference Between Ups & Inverter ? And Electrical Engineering & Electronics Engineering ?

Description : What Is The One Main Difference Between Ups & Inverter ? And Electrical Engineering & Electronics Engineering ?

Last Answer : uninterrupted power supply is mainly use for short time .me according to ups VA it gives backup. ups is also two types : on line. offline. online ups having high volt and amp for long time backup ... but inverter is start with 2v,24,dc to 36v dc and 20amp to 80amp battery with long time backup.

What organization has published safety guidelines for the maximum limits of RF energy near the human body? A. The American National Standards Institute (ANSI). B. The Environmental Protection Agency (EPA). C. The Federal Communications Commission (FCC). D. The Institute Of Electrical and Electronics Engineers (IEEE).

Description : What organization has published safety guidelines for the maximum limits of RF energy near the human body? A. The American National Standards Institute (ANSI). B. The Environmental Protection ... Communications Commission (FCC). D. The Institute Of Electrical and Electronics Engineers (IEEE).

Last Answer : A. The American National Standards Institute (ANSI).

Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Description : Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Last Answer : B. Undergrounding

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering

Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Description : Which of the following branch process with sensory feedback in robotics? A : Computer Engineering B : Mechanical Engineering C : Electrical Engineering D : Electronics Engineering

Last Answer : A : Computer Engineering

Who developed standards for the OSI reference model? a. ISO - International Standards Organization b. ANSI - American National Standards Institute c. IEEE - Institute of Electrical and Electronics Engineers d. ACM - Association for Computing Machinery

Description : Who developed standards for the OSI reference model? a. ISO - International Standards Organization b. ANSI - American National Standards Institute c. IEEE - Institute of Electrical and Electronics Engineers d. ACM - Association for Computing Machinery

Last Answer : a. ISO - International Standards Organization

Robot is a combined creation of mechanical,electrical,electronics and computer engineering. (A) False (B) True

Description : Robot is a combined creation of mechanical,electrical,electronics and computer engineering. (A) False (B) True

Last Answer : B

What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Description : What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Last Answer : Bureau of energy efficiency.

Full form of BEE a. Bureau of energy efficient b. Basic electrical and electronics c. Basic thermal engineering d. None of the above.

Description : Full form of BEE a. Bureau of energy efficient b. Basic electrical and electronics c. Basic thermal engineering d. None of the above.

Last Answer : Bureau of energy efficient

Basic electrical and electronics engineering practicals for diploma 22310 MSBTE

Description : 1.Determine the permeability of magnetic material by plotting its BH curve 2. Measure voltage, current and power in 1-phase circuit with resistive load. 3. Measure voltage, current and ... .Make Star and Delta connection in induction motor starters and measure the line and phase values.

Last Answer : Practical no. 6 Aim: Make Star and Delta connection in induction motor starters and measure the line and phase values. Apparatus required:  voltmeter, ammeter, induction motor Circuit diagram ... Result: Hence we have measured the line and phase value of star and delta connection.

what is the difference between electrical and electronics ?

Description : what is the difference between electrical and electronics ?

Last Answer : Electrical involves Generation, transmission and distribution of electricity and hence the use of larger devices like generator, motors and transformer. Electronics works either on stepped down ac voltage ... etc. Electronics could be analog or digital depending on mode of operation of transistor.

When Ontario Hydro workers set up electrical cables during the summer they allow the cables to sag. Suggest a reason for this. In your answer refer to the particle theory?

Description : When Ontario Hydro workers set up electrical cables during the summer they allow the cables to sag. Suggest a reason for this. In your answer refer to the particle theory?

Last Answer : i know someones going to be on this sooooooooo....... they sag because the hydro workers know, from the heat the cbles will sag during the summer, so they start the sag so they cant sag anymore

Which of the following statements concerning electrical cables is correct? A. Where they pass through watertight bulkheads, they should be fitted with watertight stuffing boxes. B. Electric cable coverings should never be grounded. C. Electrical cables must be rigidly held in place by welding of armored cable, or glued in place where nonmetallic insulation is used. D. All of the above.

Description : Which of the following statements concerning electrical cables is correct? A. Where they pass through watertight bulkheads, they should be fitted with watertight stuffing boxes. B. Electric cable coverings should ... , or glued in place where nonmetallic insulation is used. D. All of the above.

Last Answer : Answer: A

When electrical cables penetrate watertight bulkheads, _______________. A. they should be grounded on either side of the bulkhead B. they must be bent to a radius of six diameters C. a watertight stuffing tube capable of accepting packing should be employed D. they should be secured by a clamp

Description : When electrical cables penetrate watertight bulkheads, _______________. A. they should be grounded on either side of the bulkhead B. they must be bent to a radius of six diameters C. a watertight stuffing tube capable of accepting packing should be employed D. they should be secured by a clamp

Last Answer : Answer: C

The physical layer provides __________a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Description : The physical layer provides __________ a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Last Answer : d. all of the mentioned

The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal levelC. specification for IR over optical fiber D. all of the mentioned

Description : The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Last Answer : D. all of the mentioned

The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Description : The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Last Answer : d) all of the mentioned

One of the practical application of platinum is a) electrical cables c)decorating food stuff b) cooking vessel d)dentistry

Description : One of the practical application of platinum is a) electrical cables c)decorating food stuff b) cooking vessel d)dentistry

Last Answer : d)dentistry

The material commonly used for sheaths of underground cables is (a) lead (b) rubber (c) copper (d) iron

Description : The material commonly used for sheaths of underground cables is (a) lead (b) rubber (c) copper (d) iron

Last Answer : (a) lead

The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Description : The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Last Answer : (b) steel

Copper as conductor for cables is used as (a) annealed (b) hardened and tempered (c) hard drawn (d) alloy with chromium

Description : Copper as conductor for cables is used as (a) annealed (b) hardened and tempered (c) hard drawn (d) alloy with chromium

Last Answer : (a) annealed

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Last Answer : B. absorption loss

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Last Answer : absorption loss

The material commonly used for sheaths of underground cables is (a) lead (b) rubber (c) copper (d) iron

Description : The material commonly used for sheaths of underground cables is (a) lead (b) rubber (c) copper (d) iron

Last Answer : (a) lead

The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Description : The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper

Last Answer : (b) steel

Why is aluminium used instead of copper for overhead cables?

Description : Why is aluminium used instead of copper for overhead cables?

Last Answer : Because copper reacts with atmosphere variation and it's cost High as compared to aluminium and aluminium is good property and less cost so aluminium is used

Economic problem arises mainly due to (1) overpopulation (2) unemployment (3) scarcity of resources (4) lack of industries

Description : Economic problem arises mainly due to (1) overpopulation (2) unemployment (3) scarcity of resources (4) lack of industries

Last Answer : (3) scarcity of resources Explanation: The theory of Economic problem states that there is scarcity, or that the finite resources available are insufficient to satisfy all human wants and needs. The ... produced and how the factors of production (such as capital and labor) are to be allocated.

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Waste/polluted water discharged from electroplating, blast furnace and coal mining industries contain mainly __________ substances. (A) Radioactive (B) Organic (C) Inorganic (D) None of these

Description : Waste/polluted water discharged from electroplating, blast furnace and coal mining industries contain mainly __________ substances. (A) Radioactive (B) Organic (C) Inorganic (D) None of these

Last Answer : (C) Inorganic

Economic problem arises mainly due to (1) overpopulation (2) unemployment (3) scarcity of resources (4) lack of industries

Description : Economic problem arises mainly due to (1) overpopulation (2) unemployment (3) scarcity of resources (4) lack of industries

Last Answer : scarcity of resources

In which of the following industries is mica used as a raw material? (a) Electrical (b) Iron and steel (c) Toys (d) Glass and pottery

Description : In which of the following industries is mica used as a raw material? (a) Electrical (b) Iron and steel (c) Toys (d) Glass and pottery

Last Answer : Ans:(a)

What are the uses of chemical industries? -SST 10th

Description : What are the uses of chemical industries? -SST 10th

Last Answer : The chemical industry is its own largest consumer. Basic chemicals undergo processing to further produce other chemicals that are used for industrial application, agriculture or directly for ... and plastics or petrochemicals are used for producing synthetic fibres and synthetic rubber, etc.

Analyse the role of chemical industries in the Indian economy. -SST 10th

Description : Analyse the role of chemical industries in the Indian economy. -SST 10th

Last Answer : 1. The Chemical Industry in India is fast growing and diversifying, contributing approximately 3 per cent of the GDP. It is one of the third largest industries in Asia and occupies ... which are of great importance to industrial application, agriculture or directly for the consumer market.

What is mainly obtained from bauxite? (a) Copper (b) Aluminium (c) Iron (d) Gold

Description : What is mainly obtained from bauxite? (a) Copper (b) Aluminium (c) Iron (d) Gold

Last Answer : Ans:(b)

Babbitt metal (used for making bearings) comprises of (A) Mainly tin (85%) and lead (B) Saw dust and iron dust mixture (C) Zinc and aluminium (D) Copper and aluminium

Description : Babbitt metal (used for making bearings) comprises of (A) Mainly tin (85%) and lead (B) Saw dust and iron dust mixture (C) Zinc and aluminium (D) Copper and aluminium

Last Answer : (A) Mainly tin (85%) and lead

70] Silicon steel used in laminations mainly reduces A. Hysteresis loss B. Eddy current losses C. Copper loss D. All of the above

Description : 70] Silicon steel used in laminations mainly reduces A. Hysteresis loss B. Eddy current losses C. Copper loss D. All of the above

Last Answer : A. Hysteresis loss

The efficiency of a transformer is mainly dependent on (A) core losses. (B) copper losses. (C) stray losses. (D) dielectric losses.

Description : The efficiency of a transformer is mainly dependent on (A) core losses. (B) copper losses. (C) stray losses. (D) dielectric losses.

Last Answer : Ans: A Core loss has prominent value over other losses

Which of the following mineral is used for food and in chemical industries? A. Fire Clay B. Chromite C. Rock Salt D. Gypsum

Description : Which of the following mineral is used for food and in chemical industries? A. Fire Clay B. Chromite C. Rock Salt D. Gypsum

Last Answer : ANSWER: C

Which of the following mineral is used for food and in chemical industries? A. Fire Clay B. Chromite C. Rock Salt D. Gypsum

Description : Which of the following mineral is used for food and in chemical industries? A. Fire Clay B. Chromite C. Rock Salt D. Gypsum

Last Answer : ANSWER: C

Detroit, USA, is famous for which of the following industries? (1) Iron and Steel (2) Automobile (3) Petro-chemical (4) Cotton textile

Description : Detroit, USA, is famous for which of the following industries? (1) Iron and Steel (2) Automobile (3) Petro-chemical (4) Cotton textile

Last Answer : (2) Automobile Explanation: Known as the world's traditional automotive center, "Detroit" is a metonym for the American automobile industry and an important source of popular music legacies. Detroit and ... as home to America's 'Big Three' automobile companies, General Motors, Ford, and Chrysler.