Full form of ISEER is ______ A. Indian seasonal electric efficiency ratio B. Indian seasonal efficiency energy ratio C. International seasonal efficiency energy ratio D. Indian seasonal energy efficiency ratio

Full form of ISEER is ______
A. Indian seasonal electric efficiency ratio
B. Indian seasonal efficiency energy ratio
C. International seasonal efficiency energy ratio
D. Indian seasonal energy efficiency ratio
by

1 Answer

Answer :

Indian seasonal energy efficiency ratio
by

Related questions

___ is the system to reduce the amount of energy input into the system without negatively affecting the output. A) Energy Management. C) ISEER. B) Energy audit. D) Energy monitoring.

Description : ________ is the system to reduce the amount of energy input into the system without negatively affecting the output. A) Energy Management. C) ISEER. B) Energy audit. D) Energy monitoring.

Last Answer : Energy audit.

The standards and labelings scheme (S&L) is one of the major thurst areas of . a) BEE b) ISEER c) HVAC d) ISO

Description : The standards and labelings scheme (S&L) is one of the major thurst areas of . a) BEE b) ISEER c) HVAC d) ISO

Last Answer : bee

Full form of EER is _____ A. Energy Electric Ratio C. Energy Efficiency Ratio B. Energy Effective Ratio D. Energy Electron Ratio

Description : Full form of EER is _____ A. Energy Electric Ratio C. Energy Efficiency Ratio B. Energy Effective Ratio D. Energy Electron Ratio

Last Answer : Energy Efficiency Ratio

SEER: Seasonal Energy Efficiency Ratio (SEER)

Description : SEER: Seasonal Energy Efficiency Ratio (SEER)

Last Answer : SEER: Seasonal Energy Efficiency Ratio (SEER), is most commonly used to measure the efficiency of a central air conditioner. The higher the SEER, the more efficient the system OR It is the ... the ratio of total capacity to the total KW energy usage at specific humidity and temperature condition.

Full form of BEE is ____ A. Basic Electronics and Engineering C. Bureau of Electric Energy B. Bureau of Electric Efficiency D. Bureau of Energy Efficiency

Description : Full form of BEE is ____ A. Basic Electronics and Engineering C. Bureau of Electric Energy B. Bureau of Electric Efficiency D. Bureau of Energy Efficiency

Last Answer : Bureau of Electric Efficiency

Energy Efficiency Ratio is Equal A. Cooling Capacity (W) + Power consumption (W) B. Cooling Capacity (W) - Power consumption (W) C. Cooling Capacity (W) / Power consumption (W) D. Cooling Capacity (W) X Power consumption (

Description : Energy Efficiency Ratio is Equal A. Cooling Capacity (W) + Power consumption (W) B. Cooling Capacity (W) - Power consumption (W) C. Cooling Capacity (W) / Power consumption (W) D. Cooling Capacity (W) X Power consumption (W)

Last Answer : Cooling Capacity (W) + Power consumption (W)

The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Description : . The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Last Answer : Energy efficiency RATIO (EER).

Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Description : Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Last Answer : EER = 3.42 COP

What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Description : What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Last Answer : Overall efficiency

. Improved cooling efficiency and minimum usage of material are the key features of ______ a. Natural draft cooling towers b. Cross flow towers c. Hyperbolic cooling d. All of above

Description : . Improved cooling efficiency and minimum usage of material are the key features of ______ a. Natural draft cooling towers b. Cross flow towers c. Hyperbolic cooling d. All of above

Last Answer : Hyperbolic cooling

Seasonal efficiency

Description : Seasonal efficiency

Last Answer : Seasonal efficiency is how well the boiler uses fuel over the entire heating season. It is the ratio of the total seasonal heat output used by the facility to the total seasonal fuel input. The seasonal efficiency depends on the boiler’s steady-state efficiency, standby losses, and cycling losses. 

What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Description : What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Last Answer : Bureau of energy efficiency.

The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Description : The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Last Answer : Minimum energy performance standards

An electric motor drives a windless which hauls up a crate A of weight W = 500 kg up an inclined plane through a height of 10 m in 2 minutes. The torque acting on the windless is 25 kgm and the drum of the windless makes 30 rpm. The efficiency of the inclined plane would be a.0.41 b.0.61 c.0.265 d.0.5305 e.0.66

Description : An electric motor drives a windless which hauls up a crate A of weight W = 500 kg up an inclined plane through a height of 10 m in 2 minutes. The torque acting on the windless is 25 kgm and the drum of the ... The efficiency of the inclined plane would be a.0.41 b.0.61 c.0.265 d.0.5305 e.0.66

Last Answer : d. 0.5305

What is the name given to ratio of actual cycle efficiency and ideal cycle efficiency.

Description : What is the name given to ratio of actual cycle efficiency and ideal cycle efficiency.

Last Answer : Efficiency ratio.

What is the ratio of the useful heat extracted to heating value?  A. Combustion efficiency  B. Phase efficiency  C. Heat efficiency  D. Work efficiency

Description : What is the ratio of the useful heat extracted to heating value?  A. Combustion efficiency  B. Phase efficiency  C. Heat efficiency  D. Work efficiency

Last Answer : Combustion efficiency

Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Description : Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Last Answer : Network output to total heat input

The efficiency of Diesel cycle depends upon  A. temperature limits  B. pressure ratio  C. compression ratio  D. cut-off ratio and compression ratio

Description : The efficiency of Diesel cycle depends upon  A. temperature limits  B. pressure ratio  C. compression ratio  D. cut-off ratio and compression ratio

Last Answer : Answer: D

The efficiency of a dual combustion cycle __________ upon cut-off ratio.  A. depends  B. does not depend

Description : The efficiency of a dual combustion cycle __________ upon cut-off ratio.  A. depends  B. does not depend

Last Answer : Answer: A

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

When cut-off ratio is __________ the efficiency of Diesel cycle approaches to Otto cycle efficiency.  A. zero  B. 1/5  C. 4/5  D. 1

Description : When cut-off ratio is __________ the efficiency of Diesel cycle approaches to Otto cycle efficiency.  A. zero  B. 1/5  C. 4/5  D. 1

Last Answer : Answer: A

The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Description : The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Last Answer : Answer: B

The ideal efficiency of a Brayton cycle with regeneration, with increase in pressure ratio will  (a) increase  (b) decrease  (c) remain unchanged  (d) increase/decrease depending on ap-plication  (e) unpredictable. “

Description : The ideal efficiency of a Brayton cycle with regeneration, with increase in pressure ratio will  (a) increase  (b) decrease  (c) remain unchanged  (d) increase/decrease depending on ap-plication  (e) unpredictable. “

Last Answer : Answer : b

The ideal efficiency of a Brayton cycle without regeneration with increase ni pressure ratio will

Description : The ideal efficiency of a Brayton cycle without regeneration with increase ni pressure ratio will  (a) increase  (b) decrease  (c) remain unchanged  (d) increase/decrease depending on application  (e) unpredictable.

Last Answer : Answer : a

For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Description : For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Last Answer : Answer : a

The voltage control in electric supply networks in required on account of which of the following reasons ? (a) Adjustment of voltage at consumers premises within statutory limits (b) Control of active and reactive power (c) Adjustment of short period daily and seasonal voltage variations in accordance with variations of load (d) All of the above

Description : The voltage control in electric supply networks in required on account of which of the following reasons ? (a) Adjustment of voltage at consumers premises within statutory limits (b) Control of ... daily and seasonal voltage variations in accordance with variations of load (d) All of the above

Last Answer : (d) All of the above

The ratio of the mass of vapor to the total mass of the mixture is called ______.  A. Vapor ratio  B. Vapor content  C. Vapor index  D. Quality

Description : The ratio of the mass of vapor to the total mass of the mixture is called ______.  A. Vapor ratio  B. Vapor content  C. Vapor index  D. Quality

Last Answer : Quality

The form of implementing the new energy efficiency technologies, new materials and new manufacturing process is ____________ A. Energy management C. Energy savings B. Energy audit D. All of the above

Description : The form of implementing the new energy efficiency technologies, new materials and new manufacturing process is ____________ A. Energy management C. Energy savings B. Energy audit D. All of the above

Last Answer : Energy management

The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Description : The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Last Answer : (C) 10 to 20

In time-series analysis, which source of variation can be estimated by the ratio-to-trend method? a) Cyclical b) Trend c) Seasonal d) Irregular

Description : In time-series analysis, which source of variation can be estimated by the ratio-to-trend method? a) Cyclical b) Trend c) Seasonal d) Irregular

Last Answer : c) Seasonal

Indian monsoon is marked by seasonal shift caused by: [Teachers' Exam 1994] (a) differential heating of land and sea (b) cold winds of Central Asia (c) great uniformity of temperature (d) None of these

Description : Indian monsoon is marked by seasonal shift caused by: [Teachers' Exam 1994] (a) differential heating of land and sea (b) cold winds of Central Asia (c) great uniformity of temperature (d) None of these

Last Answer : Ans: (a)

Seasonal reversal of wind direction takes place over the Indian subcontinent?

Description : Seasonal reversal of wind direction takes place over the Indian subcontinent?

Last Answer : Ans: Seasonal reversal of wind direction over the Indian subcontinent takes place due to pressure differential. El Nino has major role to play in the seasonal reversal of wind direction over the Indian subcontinent.

The prime importance of these is to educate and inform consumers about how energy efficient each product is ? a) Efficiency chart c) Both a & b b) Star Rating d) None of the above

Description : The prime importance of these is to educate and inform consumers about how energy efficient each product is ? a) Efficiency chart c) Both a & b b) Star Rating d) None of the above

Last Answer : Star Rating

To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Description : To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Last Answer : Energy Management 

The Bureau of Energy Efficiency launched a) 2005 c) 2006 b) 2010 d) 2007

Description : The Bureau of Energy Efficiency launched a) 2005 c) 2006 b) 2010 d) 2007

Last Answer : 2006

is the key to a systematic approach for decision making in the area of energy management. a) Energy Audit c) Energy management b) Efficiency d) None of the above

Description : is the key to a systematic approach for decision making in the area of energy management. a) Energy Audit c) Energy management b) Efficiency d) None of the above

Last Answer : Energy Audit

Bureau of Energy Efficiency was founded on ........ c. 1 March 2001 c) 1 March 2002 d. 4 March 2001 d) 4 March 2002

Description : Bureau of Energy Efficiency was founded on ........ c. 1 March 2001 c) 1 March 2002 d. 4 March 2001 d) 4 March 2002

Last Answer : 1 MARCH 2002

34. The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer : Energy Performance

31. Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Description : Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Last Answer : Energy substitution

The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer :  Energy Performance 

_____ energy performance/ efficiency. a] Allocating c] Allocating b] Checking d] Determining

Description : _____ energy performance/ efficiency. a] Allocating c] Allocating b] Checking d] Determining

Last Answer : determining

________ energy use, so that projects intended to improve energy efficiency can be checked. a] Recording c] Checking b] Controlling. d]Allocating

Description : ________ energy use, so that projects intended to improve energy efficiency can be checked. a] Recording c] Checking b] Controlling. d]Allocating

Last Answer : Recording

Annual total energy & production chart smoothens out ____ in energy timing of meter readings. a) Errors b) Efficiency c) Accuracy. d) Repeatability

Description : Annual total energy & production chart smoothens out ____ in energy timing of meter readings. a) Errors b) Efficiency c) Accuracy. d) Repeatability

Last Answer : errors

Future energy use is likely to vary if you change____ of your business a) Labour. b) Funds c) Aspects d) Efficiency

Description : Future energy use is likely to vary if you change____ of your business a) Labour. b) Funds c) Aspects d) Efficiency

Last Answer : Aspects

The S & L activity has been identified as a key activity for energy efficiency improvement which stands for A. Standards & Listening. B. Standards & Labelling. C. Standards & Logistics. D. Standards & Lateral.

Description : The S & L activity has been identified as a key activity for energy efficiency improvement which stands for A. Standards & Listening. B. Standards & Labelling. C. Standards & Logistics. D. Standards & Lateral.

Last Answer : Standards & Labelling.

The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Description : The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Last Answer : 2006

BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Description : BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Last Answer : savings in electricity consumption

BEE (in star rating) stand for. A) Bureau of Earth Efficiency . C) Bicycle energy expenditure B) Bureau of Energy Efficiency . D) Bureau of Energy Expenditure

Description : BEE (in star rating) stand for. A) Bureau of Earth Efficiency . C) Bicycle energy expenditure B) Bureau of Energy Efficiency . D) Bureau of Energy Expenditure

Last Answer : Bureau of Energy Efficiency

__________ mainly give consumers the necessary information to make informed purchase. A) Energy management C) label B) Standards D) energy efficiency

Description : . __________ mainly give consumers the necessary information to make informed purchase. A) Energy management C) label B) Standards D) energy efficiency

Last Answer : label

A star rating, ranging from ________ in the asending order of energy efficiency.imp A) 1 to 4. C) 1 to 5 B) 1 to 6. D) 1 to 10

Description : A star rating, ranging from ________ in the asending order of energy efficiency.imp A) 1 to 4. C) 1 to 5 B) 1 to 6. D) 1 to 10

Last Answer : 1 to 5