State whether the Diesel Engine Driven Monoset Pumps for agricultural purposes have been notified under the voluntary labelling. A. True. B. False.

State whether the Diesel Engine Driven Monoset Pumps for agricultural purposes have been notified under the voluntary labelling.
A. True.
B. False.
by

1 Answer

Answer :

true
by

Related questions

State whether the given product have been notified under the mandatory labelling as on May 2018. ( Inverter type Room A/c). A. True. B. False.

Description : State whether the given product have been notified under the mandatory labelling as on May 2018. ( Inverter type Room A/c). A. True. B. False.

Last Answer : false

Labelling on the induction motor is voluntary A. True B. False

Description : Labelling on the induction motor is voluntary A. True B. False

Last Answer : true

Most of the centrifugal pumps used in chemical plants are usually __________ driven. (A) Steam (B) Diesel engine (C) Electric motor (D) Gas turbine

Description : Most of the centrifugal pumps used in chemical plants are usually __________ driven. (A) Steam (B) Diesel engine (C) Electric motor (D) Gas turbine

Last Answer : (C) Electric motor

On which Following products is labelling not Voluntary a) Colour TV c) Ceiling fans b) Ballast d) Induction motors

Description : On which Following products is labelling not Voluntary a) Colour TV c) Ceiling fans b) Ballast d) Induction motors

Last Answer : Colour TV

Product of which labelling is voluntary .... v. Frost Free Refrigerator.C) Colour TV D) Distribution TransformeR vi. Ceiling Fans

Description : Product of which labelling is voluntary .... v. Frost Free Refrigerator.C) Colour TV D) Distribution TransformeR vi. Ceiling Fans

Last Answer : CEILING FANS

Labeling is voluntary on a) Solid State inverters c) LED retrofit lamps b)Diesel Generator d) all of above.

Description : Labeling is voluntary on a) Solid State inverters c) LED retrofit lamps b)Diesel Generator d) all of above.

Last Answer : ALL OF ABOVE

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

The production of irrigation pumps and diesel engines started during……. a)1950s b)1930s c)1940s d)2000s

Description : The production of irrigation pumps and diesel engines started during……. a)1950s b)1930s c)1940s d)2000s

Last Answer : 1930S

The S & L activity has been identified as a key activity for energy efficiency improvement which stands for A. Standards & Listening. B. Standards & Labelling. C. Standards & Logistics. D. Standards & Lateral.

Description : The S & L activity has been identified as a key activity for energy efficiency improvement which stands for A. Standards & Listening. B. Standards & Labelling. C. Standards & Logistics. D. Standards & Lateral.

Last Answer : Standards & Labelling.

A turbo chargers are driven by 1. Engine 2. Exhaust gas 3. Dynamo 4. PTO ans 2

Description : A turbo chargers are driven by 1. Engine 2. Exhaust gas 3. Dynamo 4. PTO ans 2

Last Answer : ans 2

Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons (b) permission to use only pure diesel with a maximum of 500 ppm sulphur as fuel for vehicles (c) use of non-polluting compressed natural gas (CNG) only as fuel by all buses and trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Description : Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and ... trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Last Answer : (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons

Which of the following products on which labelling is not mandatory a) Frost free c) LPG stoves b) AC d) Laptops

Description : Which of the following products on which labelling is not mandatory a) Frost free c) LPG stoves b) AC d) Laptops

Last Answer : LPG stoves 

To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Description : To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Last Answer : Energy Management 

Product on which labelling is mandatory..... iii. Electric Geysers. B) LPG Stoves iv. Ballast. D) Colour TV

Description : Product on which labelling is mandatory..... iii. Electric Geysers. B) LPG Stoves iv. Ballast. D) Colour TV

Last Answer : COLOUR TV

The standard and labelling scheme is invoked for 20 equipment from which __________ number of equipment are mandatory. A. 30. B. 20. C. 10. D. 15.

Description : The standard and labelling scheme is invoked for 20 equipment from which __________ number of equipment are mandatory. A. 30. B. 20. C. 10. D. 15.

Last Answer : 20

The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Description : The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Last Answer : 2006

The manufacturer are officially required to put this label as per the standards and labelling program introduce in…………… A) 2004. C) 2005 B) 2006. D) 2007

Description : The manufacturer are officially required to put this label as per the standards and labelling program introduce in…………… A) 2004. C) 2005 B) 2006. D) 2007

Last Answer : 2006

Pick up the correct statement from the following: (A) The pile driven in sand is called sand pile (B) The drilled hole filled with sand is called sand pile (C) The sand piles are used for bearing purposes (D) None of these

Description : Pick up the correct statement from the following: (A) The pile driven in sand is called sand pile (B) The drilled hole filled with sand is called sand pile (C) The sand piles are used for bearing purposes (D) None of these

Last Answer : Option A

Diesel Fuel Pumps

Description : Diesel Fuel Pumps

Last Answer : A diesel fuel pump, as the name suggests, is a pump for diesel engines. A diesel engine uses internal combustion to work. The pump is an essential component of the internal combustion process. The internal ... needs to be replaced because of damage, it is best to take the car to a repair shop.

Motorized Knapsack sprayer powered by a. petrol engine. b. Diesel engine. c. gas engine. d. None of above

Description : Motorized Knapsack sprayer powered by a. petrol engine. b. Diesel engine. c. gas engine. d. None of above

Last Answer : Ans-   a. petrol engine.

Self-propelled combine harvester is provide with a) Powering engine b) Petrol engine c) Diesel engine d) Kerosene engine

Description : Self-propelled combine harvester is provide with a) Powering engine b) Petrol engine c) Diesel engine d) Kerosene engine

Last Answer : Diesel engine

Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Description : Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Last Answer : Gasoline engine

Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Description : Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Last Answer : Carnot engine

Which of the following is least efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Description : Which of the following is least efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Last Answer : Gasoline engine

Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Description : Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Last Answer : External combustion engine

Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Description : Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Last Answer : Answer : a

Which of the following is not dealt under Section 3(3) of the Environment (Protection) Act, 1986? (1) The Biodiversity Authority (2) The Coastal Zone Management Authority (3) Authority setup to monitor the State of Notified Ecologically Sensitive Areas (4) Protection of Plant Varieties and Farmers Right Authority

Description : Which of the following is not dealt under Section 3(3) of the Environment (Protection) Act, 1986? (1) The Biodiversity Authority (2) The Coastal Zone Management Authority (3) ... the State of Notified Ecologically Sensitive Areas (4) Protection of Plant Varieties and Farmers Right Authority

Last Answer : (4) Protection of Plant Varieties and Farmers Right Authority Explanation: The Protection of Plant Varieties and Farmers' Rights Act, 2001 provides for the Protection and Plant Varieties and Farmers' ... and plant breeders, and to encourage the development and cultivation of new varieties of plants.

Cattle husbandry is done for the following purposes `" (i) Milk production"" ""(ii) Agricultural work"` `"(iii) Meat production"" ""(iv) Egg productio

Description : Cattle husbandry is done for the following purposes `" (i) Milk production"" ""(ii) Agricultural work"` `"(iii) Meat production"" ""(iv) Egg productio

Last Answer : Cattle husbandry is done for the following purposes `" (i) Milk production"" ""(ii) Agricultural work"` `"(iii) ... . (iii) and (iv) D. (i) and (iv)

An emergency generator, driven by an internal combustion engine, shall be tested under load for a minimum of 2 hours at least once every _____________. A. week B. 2 weeks C. month D. 3 months

Description : An emergency generator, driven by an internal combustion engine, shall be tested under load for a minimum of 2 hours at least once every _____________. A. week B. 2 weeks C. month D. 3 months

Last Answer : Answer: C

A diesel driven emergency generator is prevented from being paralleled with the ship's service generators by __________. A. an electrical interlock system B. an automatic paralleling trip switch C. the synchronizing oscilloscope D. the reverse current relay

Description : A diesel driven emergency generator is prevented from being paralleled with the ship's service generators by __________. A. an electrical interlock system B. an automatic paralleling trip switch C. the synchronizing oscilloscope D. the reverse current relay

Last Answer : Answer: A

Piles are usually driven by (A) Diesel operated hammer (B) Drop hammer (C) Single acting steam hammer (D) All the above

Description : Piles are usually driven by (A) Diesel operated hammer (B) Drop hammer (C) Single acting steam hammer (D) All the above

Last Answer : Answer: Option D

List down any five Designated Consumers notified under the Energy Conservation Act.

Description : List down any five Designated Consumers notified under the Energy Conservation Act.

Last Answer : (1) Aluminium, (2) Cement, (3) Chloralkali, (4) Fertiliser, (5) Steel, (6) Pulp & Paper,  (7)Thermal Power Plants, (8) Textile, (9) Railways.

Depreciation under ICDS-V shall be charged in accordance with : a) Income Tax Act 1961 b) Companies Act 2013 c) Notified Rate –CBEC d) Straight line over the useful life

Description : Depreciation under ICDS-V shall be charged in accordance with : a) Income Tax Act 1961 b) Companies Act 2013 c) Notified Rate –CBEC d) Straight line over the useful life

Last Answer : a) Income Tax Act 1961

On which products is Labeling Voluntary a) Direct cool Refrigerator b) Ceiling fans c) Colour TV d) Tubular Florescent Lamps

Description : On which products is Labeling Voluntary a) Direct cool Refrigerator b) Ceiling fans c) Colour TV d) Tubular Florescent Lamps

Last Answer : ceiling fans

Products on which labeling is voluntary are a) Electric geysers b) Induction motors b) Ceiling fans d) All of the above

Description : Products on which labeling is voluntary are a) Electric geysers b) Induction motors b) Ceiling fans d) All of the above

Last Answer : All of the above

………….. product on which labeling is voluntary. A. LPG stoves C. laptops B. Ballast D. All of above

Description : ………….. product on which labeling is voluntary. A. LPG stoves C. laptops B. Ballast D. All of above

Last Answer : all of above

Assertion (A): There are several goods and services that society needs however private sector doesn‘t produce all of them. Reason (R): Private sector is profit driven. (a) Both A & R are true and R is the correct explanation of A (b) Both A & R are true but R is not the correct explanation of A. (c) A is true but R is false. (d) Both A & R are false.

Description : Assertion (A): There are several goods and services that society needs however private sector doesn t produce all of them. Reason (R): Private sector is profit driven. (a) Both A & R are true and R is the correct ... correct explanation of A. (c) A is true but R is false. (d) Both A & R are false.

Last Answer : (a) Both A & R are true and R is the correct explanation of A

The software metrics chosen by an organization are driven by the business or technical goals an organization wishes to accomplish. (A) True (B) False

Description : The software metrics chosen by an organization are driven by the business or technical goals an organization wishes to accomplish. (A) True (B) False

Last Answer : (A) True

Why Cavitation Will Occur In Centrifugal Pumps And Not In Displacement Pumps?

Description : Why Cavitation Will Occur In Centrifugal Pumps And Not In Displacement Pumps?

Last Answer : The formation of cavities (or bubbles) is induced by flow separation, or non-uniform flow velocities, inside a pump casing. In centrifugal pumps the eye of the pump impeller is smaller than ... to increase in temperature in impeller. This air bubbles are transmitted to pump which forms cavitation.

Using an organic fluid that boils at a low temperature means that energy could be regeneratedfrom waste fluids is known as ________. a) Heat exchanger b) Heat remover c) Heat pumps d) Heat absorber`

Description : Using an organic fluid that boils at a low temperature means that energy could be regeneratedfrom waste fluids is known as ________. a) Heat exchanger b) Heat remover c) Heat pumps d) Heat absorber

Last Answer : Heat pumps

"Official confirms report." "Authorities have been notified." Do you know anyone personally who is an actual "official" or "authority"? Are you one?

Description : "Official confirms report." "Authorities have been notified." Do you know anyone personally who is an actual "official" or "authority"? Are you one?

Last Answer : answer:I’ve always assumed that “Official” refers to an official officer of the state. “Authorities” are those authorized by the Officials to conduct investigations, make arrests, and enforce law. You know… The Fuzz. Perhaps my assumptions are presumptuous.

Consider the following statements: (a) Depth - first search is used to traverse a rooted tree. (b) Pre - order, Post-order and Inorder are used to list the vertices of an ordered rooted tree. (c) Huffman's algorithm is used to find an optimal binary tree with given weights. (d) Topological sorting provides a labelling such that the parents have larger labels than their children. Which of the above statements are true ? (A) (a) and (b) (B) (c) and (d) (C) (a) , (b) and (c) (D) (a), (b) , (c) and (d)

Description : Consider the following statements: (a) Depth - first search is used to traverse a rooted tree. (b) Pre - order, Post-order and Inorder are used to list the vertices of an ordered rooted tree. (c) Huffman's algorithm is used to find an optimal ... (d) (C) (a) , (b) and (c) (D) (a), (b) , (c) and (d)

Last Answer : (D) (a), (b) , (c) and (d)

In determining whether the work of the internal auditors is likely to be adequate for purposes of the audit, the external auditor shall evaluate the internal auditor's a. Efficiency and experience b. Competence and objectivity c. Independence and review skills d. Training and supervisory skills

Description : In determining whether the work of the internal auditors is likely to be adequate for purposes of the audit, the external auditor shall evaluate the internal auditor's a. Efficiency and experience b. Competence and objectivity c. Independence and review skills d. Training and supervisory skills

Last Answer : Competence and objectivity

True statements about saccadic eye movements include: a. only occur when the patient is awake b. the velocity is under voluntary control c. the maximum velocity is 700 degrees / second d. it has a latency of 250msec

Description : True statements about saccadic eye movements include: a. only occur when the patient is awake b. the velocity is under voluntary control c. the maximum velocity is 700 degrees / second d. it has a latency of 250msec

Last Answer : the maximum velocity is 700 degrees / second

A professional accountant may be associated with a tax return that a. Contains a false or misleading statement. b. Contains statements or information furnished recklessly or without any real knowledge of whether they are true or false. c. Omits or obscures information required to be submitted and such omission or obscurity would mislead the revenue authorities. d. Uses of estimates if such use is generally acceptable or if it is impractical under the circumstances to obtain exact data

Description : A professional accountant may be associated with a tax return that a. Contains a false or misleading statement. b. Contains statements or information furnished recklessly or without any real ... use is generally acceptable or if it is impractical under the circumstances to obtain exact data

Last Answer : Uses of estimates if such use is generally acceptable or if it is impractical under the circumstances to obtain exact data

If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Description : If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Last Answer : d. (T1 - T2) w

Combine may be self propelled or ………driven type. a. Pneumatic b. Hydraulic d. None of above

Description : Combine may be self propelled or ………driven type. a. Pneumatic b. Hydraulic d. None of above

Last Answer : Ans-    c. PTO

Post harvest technology has to develop in consonance with the needs of each society to A) Self-propelled type B) Improve nutrition C) PTO driven type D) Conveyors

Description : Post harvest technology has to develop in consonance with the needs of each society to A) Self-propelled type B) Improve nutrition C) PTO driven type D) Conveyors

Last Answer :  Improve nutrition

it is a Cultivator with tines or blades mounted on a power driven horizontal shaft. A. Disc cultivator. C Rotary cultivator B. Tine cultivator. D Trailed type cultivator

Description : it is a Cultivator with tines or blades mounted on a power driven horizontal shaft. A. Disc cultivator. C Rotary cultivator B. Tine cultivator. D Trailed type cultivator

Last Answer : Rotary cultivator