76.         power does the small scale wind machine generate.
a)    18 KW
b)    2 KW
c)    12 KW
d)    30 KW

1 Answer

Answer :

18 KW

Related questions

Description : The power generation potential in mini hydro power plant for a water flow of 3 m3 /sec with a head of 14 meters and with a system efficiency of 55% is a) 226.6 kW b) 76.4 kW c) 23.1 kW d) none of the above

Last Answer : a) 226.6 kW

Description : The power intensity of Indian farms increase from ...... to kW/hectare on basis of net-cropped area. a)0.2 to 1.30. c) 1.0 to 2.5 b) 0.5 to 1.60. d) 1.3 to 2.8

Last Answer : 0.2 to 1.30.

Description : Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Last Answer : c. 6.81 KW

Description : Fathima's father was 76 years of age when she was born while her mother was 72years old when her brother 8 years younger to her was born. What is the difference between the ages of her parents? a)12 years b)14 years c)16 years d)18 years

Last Answer : A Mother's age when Fathima 's brother was born = 72 years. Father's age when Fathima 's brother was born = (76+8) years = 84 years. Required difference = (84-72) years = 12 years

Description : One time registration fee of rupees 1,00,000 for large-scale and Rs _________ for small scale industry. A. 30,000 C. 15,000 B. 25,000 D. 28,000

Last Answer : 25000

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is 15 N per kN, the maximum speed that the locomotive can attain on level track will be a.43 kmph b.83 kmph c.103 kmph d.107 dynes e.38 kmph

Last Answer : e. 38 kmph

Description : Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Last Answer : b. 163.5 KW

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Last Answer : e. 63 kmph

Description : Punjab has farm power ok intensity of ...... a. 200 W/ hector. c) 150 kW/hector b. 3.5 kW/hector d) 3.5 W/hector

Last Answer : 3.5 kW/hector

Description : In 2000-2001 the quantum of power has rose to ...... a) 45.29 million kW c) 170 million kW b) 85 million kW. d) 145 million kW

Last Answer : 170 million kW

Description : An electric heater draws 5 kW of power for continuous hot water generation in an industry. How much quantity of water in litres per min can be heated from 30oC to 85oC ignoring losses?. a) 1.3 b) 78.18 c) 275 d) none of the above

Last Answer : a) 1.3

Description : Calculate damped natural frequency, if a spring mass damper system is subjected to periodic disturbing force of 30 N. Damping coefficient is equal to 0.76 times of critical damping coefficient and undamped natural frequency is 5 rad/sec A. 3.99 rad/sec B. 2.13 rad/sec C. 4.12 rad/sec D. 3.24 rad/sec

Last Answer : D. 3.24 rad/sec

Description : Given the symbols A, B, C, D, E, F, G and H with the probabilities 1/30, 1/30, 1/30, 2/30, 3/30, 5/30, 5/30 and 12/30 respectively. The average Huffman code size in bits per symbol is: (A) 67/30 (B) 70/34 (C) 76/30 (D) 78/30

Last Answer : (C) 76/30

Description : Why is wind power not used to generate electricity needed for large cities?

Last Answer : Simply because of the space that would be needed for thewind-turbines ! The amount of power produced by a single windturbine is relatively small. In order to power a large city, youwould need thousands of turbines - which would occupy huge swathesof land !

Description : Mechanisation in india at various levels can be done in following ways a) by introducing the improved agricultural implements on small scale holding to be operated by bullocks. b) by using small ... tractor and machines on remaining holding to supplement animal power source. d) All of the above

Last Answer : All of the above

Description : Two masses, one of the 10kg and the other unknown, are placed on a scale in a region where g = 9.67 m/sec2 . The combined weight of these two masses is 174.06 N. Find the unknown mass in kg.  a. 20 kg  b. 19 kg  c. 18 kg  d. 17 kg formula: m=Fg k / g

Last Answer : 18 kg

Description : A three-phase alternator is operating at 450 volts with the switchboard ammeter indicating 300 amps. The kw meter currently indicates 163.6 KW, with a power factor of 0.7. If the power factor increases to 0.8, the KW meter reading would increase by ___ A. 17.8 KW B. 23.2 KW C. 30.6 KW D. 37.8 KW

Last Answer : Answer: B

Description : How much is the required minimum power output of an international AM BC stations? A. 5 kW B. 30 kW C. 10 kW D. 50 kW

Last Answer : D. 50 kW

Description : A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W

Last Answer : Ans: 0.04, 1160 W

Description : A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum permissible angle of twist in the shaft is 1o. The inner diameter of the shaft is 0.7 times the outer diameter. The modulus of ... shaft is _______. (a) 43 to 45 (b) 50to 60 (c) 70 to 80 (d) 85 to 100

Last Answer : (a) 43 to 45

Description : If 3000 kW power is to be transmitted over a distance of 30 km, the desirable transmission voltage will be.  (A) 11 kV (B) 33 kV (C) 66 kV (D) 132 kV

Last Answer : By

Description : The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above

Last Answer : a.Backlash in gearing

Description : is a machine to cut herbage crops and leave the them in swath. a) Wind rower b) Sickle mower c) Fail mower d) Gang mower

Last Answer : Sickle mower

Description : Which of the following is not a unit of energy? a.Joule b.kW c.N-m d.Electron volt e.Watt-hour

Last Answer : b. kW

Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiller

Last Answer : kW/Ton of Refrigeration

Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiLLER

Last Answer : kW/Ton of Refrigeration

Description : Which of the following statements is correct concerning the motor performance curves and data table shown in the illustration? EL-0006 A. The motor RPM at full load is 1737 RPM. B. The motor draws 12.62 kw ... If the motor was developing 10 HP its power factor would be 0.92. D. All of the above.

Last Answer : Answer: D

Description : A three phase induction motor is drawing 16 Ampere at 440 Volts. If the operating power factor of the motor is 0.90 and the motor efficiency is 92%, then the mechanical shaft power output of the motor is a) 12.04 kW b) 10.09 kW c) 10.97 kW d) None of the above

Last Answer : b) 10.09 kW

Description : The likely estimate on equivalent power wastage for a leakage from 7 bar compressed air system through 1.6 mm orifice size is ____ a) 0.2 kW b) 3.0 kW c) 0.8 kW d) 12 kW

Last Answer : c) 0.8 kW

Description : Electrical machines having power outputs ranging from a few kW upto approximately 250 kW may be classified as (a) small size machines (b) medium size machines (c) large size machines (d) any ofthe above

Last Answer : (b) medium size machines

Description : When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Last Answer : e. 76?

Description : A cannon of barrel length 2 m fires a shell of weight 6 kg with a muzzle velocity of 50 m/sec. The force exerted by the gases on the shell would be approximately a.76 t b.19 t c.152 t d.8.5 t e.38 t

Last Answer : e. 38 t

Description : The volume of a gas under standard atmospheric pressure & 76 cmHg is 200m³. What is the volume when pressure is 80 cmHg if the temperature is unchanged?  a) 180 in³  b) 170 in³  c) 160 in³  d) 190 in³ Formula: P2V2 = P1V1

Last Answer : 190 in³

Description : To displace a cubic foot of fresh water, you need _________ force.  a. 62.4 lb  b. 9.81 lb  c. 76 lb  d. 760 lb

Last Answer : 62.4 lb

Description : A dumper is normally filled in 18 hours but takes 6 hours longer to fill because of a leak in the bottom of the dumper. If the dumper is full the leak will empty it in how many hours? A) 76 hours B) 78 hours C) 72 hours D) 74 hours

Last Answer : C Work done by leak in 1 hr=(1/18-1/24) =>4-3/72 =>1/72 Leak will empty the dumper in 72 hours

Description : What happens to the excess energy wind turbines generate?

Last Answer : No, it cannot be stored. When the demand for wind energy tapers off, wind turbines are idled/turned off. The blades, like on a propeller driven aircraft, are turned sideways in the wind so that they ... was 200' tall with blades that were 150' long. The turbine rotated at a maximum of 17½ RPM.

Description : An engine is supplied with 4 kW of heat energy. It is found that it produce 4 kW of work. Which kind of perpetual machine it is? Which law is violated? Also describe other kind of perpetual machine you know.

Last Answer : PMM-II: A heat engine which violates Kelvin plank statement of the second law of thermodynamics is known as Perpetual Motion Machine of the second kind (PMM-II). Or 100 percent efficient machine which is ... no machine can produce energy of its own without consuming any other form of energy.

Description : Post harvest technology has potential to create (a) Rural industries (c) Urban industries (b) Small scale ind. (d) Large scale ind.

Last Answer : Rural industries

Description : For small scale industries the company registration fee is a) Rs.100000 c) Rs.25000 b)Rs.250000 d) Rs.150000

Last Answer : 25000

Description : If small scale industry applying for registration first time required ……………..certificate A. BIS B. SSI C. Both A and B D. None of above

Last Answer : SSI

Description : Company registration fee for small scale industry is Rs ……………… A. 10000 C. 15000 B. 25000 D. 20000

Last Answer : 25000

Description : Types of scale used in BEE star rating labels. A) Small. C) Big. B) Both A and C. D) None of the above

Last Answer : both A AND C

Description : For each product under S&L scheme, BEE should upload the information on the ____ web portal A. Government C. S&L web portal B. Small scale web D. Private portal

Last Answer : S&L web portal

Description : S.S.I certificate is provided to __________ industry. A. Large scale. C. Small scale B. Medium scale. D. All of these

Last Answer : small scale

Description : S.S.I. stands for _________ A. Small scale industry C. Scanner scale industry B. Scalar scale industry D. None of the above

Last Answer : Small scale industry

Description : A use computer to automatically generate process plans is? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Last Answer : c.Higher-level strategies

Description : Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Last Answer : a.3D CAD data - CAD solid model - STL file - RP prototype

Description : To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned

Last Answer : a.Rotation angle θ

Description : Grid cables are 15 km long with a resistance of 0.20 Ω km-1, powers wasted as heat in these cables are A. 50 kW B. 60 kW C. 20 kW D. 30 kW

Last Answer : 30 kW

Description : A grouped frequency distribution table with classes of equal sizes using 63-72 (72 included) as one of the class is constructed for the following data 30, 32, 45, 54, 74, 78, 108, 112, 66, 76, 88, -Maths 9th

Last Answer : NEED ANSWER