108. is primarily a management technique that uses energy information as a basis to eliminate waste, reduce and control current level of energy use and improve the existing operating procedures. a) Energy monitoring and targeting b) CUSUM c) Specific energy consumption d) Production

108.is primarily a management technique that uses energy information as a basis to eliminate waste, reduce and control current level of energy use and improve the existing operating procedures.
a)    Energy monitoring and targeting
b)    CUSUM
c)    Specific energy consumption
d)    Production
by

1 Answer

Answer :

Energy monitoring and targeting
by

Related questions

Energy monitoring and targeting is primarily a management technique that use Energy system on basic to A) Eliminate waste C) Reduce pollution B) Both A & C are correct D) None of above

Description : Energy monitoring and targeting is primarily a management technique that use Energy system on basic to A) Eliminate waste C) Reduce pollution B) Both A & C are correct D) None of above

Last Answer : Eliminate waste

Energy monitoring and targeting is primarily a____________ technique. A) management C) information B) installation D) none of above

Description : Energy monitoring and targeting is primarily a____________ technique. A) management C) information B) installation D) none of above

Last Answer : management

is the identification of energy consumption level, which is desirable as a management objective to work towards energy conservation a) Recording b) Targeting c) Analysing d) Monitoring

Description : is the identification of energy consumption level, which is desirable as a management objective to work towards energy conservation a) Recording b) Targeting c) Analysing d) Monitoring

Last Answer : Targeting

As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Description : As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Last Answer : 18

As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Description : 96.As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Last Answer : 18

One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) comparing the energy consumption C)Controlling the energy consumption d) Reducing the production

Description : One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) comparing the energy consumption C)Controlling the energy consumption d) Reducing the production

Last Answer :  Reducing the production

Energy monitoring and targeting is built on the principle of ― ‖. a)production can be reduced to achieve reduced energy consumption‖ b)Consumption of energy is proportional to production rate‖ c)You cannot manage what you do not measure‖ d)None of the above

Description : Energy monitoring and targeting is built on the principle of ― ‖. a)production can be reduced to achieve reduced energy consumption‖ b)Consumption of energy is proportional to production rate‖ c)You cannot manage what you do not measure‖ d)None of the above

Last Answer : You cannot manage what you do not measure‖

68. One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) Comparing the energy consumption c) Controlling the energy consumption d) Reducing the production

Description : 68. One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) Comparing the energy consumption c) Controlling the energy consumption d) Reducing the production

Last Answer : Reducing the production

Energy monitoring and targeting is built on the principle of ― _____‖ a) ―production can be reduced to achieve reduced energy consumption‖ b) ―Consumption of energy is proportional to production rate‖ c) ―You cannot manage what you do not measure‖ d) None of the above.

Description : Energy monitoring and targeting is built on the principle of ― _____‖ a) ―production can be reduced to achieve reduced energy consumption‖ b) ―Consumption of energy is proportional to production rate‖ c) ―You cannot manage what you do not measure‖ d) None of the above.

Last Answer : You cannot manage what you do not measure

______is essentially aimed at establishing the existing pattern of energy consumption a. Energy Monitoring b. Energy Targeting c. energy audit d. none of these

Description : ______is essentially aimed at establishing the existing pattern of energy consumption a. Energy Monitoring b. Energy Targeting c. energy audit d. none of these

Last Answer : Ans:- a. Energy Monitoring

102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Description : 102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Last Answer : Monthly energy consumption& monthly production

67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Description : 67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Last Answer : Monthly energy consumption& monthly production

Energy monitoring and targeting is …………. a. primary management techniques b. secondary management techniques c. tertiary management techniques d. None

Description : Energy monitoring and targeting is …………. a. primary management techniques b. secondary management techniques c. tertiary management techniques d. None

Last Answer : primary management techniques

monitoring is essentially aimed at establishing the existing ………. of energy consumption. A) surface C) marking B) pattern D) none of above.

Description : monitoring is essentially aimed at establishing the existing ………. of energy consumption. A) surface C) marking B) pattern D) none of above.

Last Answer : pattern

is a statistical technique which determines and quantifies the relationship between variables and enables standard equations to be established for energy consumption. a) linear regression analysis b) time-dependent energy analysis c) moving annual total d) CUSUM

Description : is a statistical technique which determines and quantifies the relationship between variables and enables standard equations to be established for energy consumption. a) linear regression analysis b) time-dependent energy analysis c) moving annual total d) CUSUM

Last Answer : a) linear regression analysis

Comparing energy consumption to the set target on a regular basis is called as _____. a]Reporting c] Determining b] Recording d] monitoring

Description : Comparing energy consumption to the set target on a regular basis is called as _____. a]Reporting c] Determining b] Recording d] monitoring

Last Answer : monitoring

According to……………… ―energy audit‖ means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis and an action plan to reduce energy consumption a) Energy conservation act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act

Description : According to -energy audit means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis ... act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act

Last Answer : Energy conservation act 2001

Monitoring and targeting programs have been so effective that they show typical reductions in annual energy cost in the various industrial sectors between………. a. 10 to 30 % c. 5 to 20% b. 5 to 10 % d. 5 to 30%

Description : Monitoring and targeting programs have been so effective that they show typical reductions in annual energy cost in the various industrial sectors between………. a. 10 to 30 % c. 5 to 20% b. 5 to 10 % d. 5 to 30%

Last Answer : 5 to 20%

98. Monitoring and targeting programs have been so effective that they show typical reductions in annual energy cost in the various industrial sectors between………. a. 10 to 30 % c. 5 to 20% b. 5 to 10 % d. 5 to 30%

Description : 98.Monitoring and targeting programs have been so effective that they show typical reductions in annual energy cost in the various industrial sectors between………. a. 10 to 30 % c. 5 to 20% b. 5 to 10 % d. 5 to 30%

Last Answer : 5 to 20%

The Monitoring and Targeting programs they show typical elections in annual energy costs A) selection C) power B) election D) none of above

Description : The Monitoring and Targeting programs they show typical elections in annual energy costs A) selection C) power B) election D) none of above

Last Answer : none of above

CUSUM technique provides __________ a) Deployment. b) Maintenance c) Development. d) Trend line

Description : CUSUM technique provides __________ a) Deployment. b) Maintenance c) Development. d) Trend line

Last Answer : Trend line

The M & T system stand for a) Market and Trading system b) Monitoring and Targeting system c) Market and Targeting System d) None of the above

Description : The M & T system stand for a) Market and Trading system b) Monitoring and Targeting system c) Market and Targeting System d) None of the above

Last Answer : Monitoring and Targeting system

109. is essentially aimed at preserving an established pattern. a) Targeting b) Analysing c) Monitoring d) ecording

Description : 109.is essentially aimed at preserving an established pattern. a) Targeting b) Analysing c) Monitoring d) ecording

Last Answer : Monitoring

CUSUM stands for __________ a) Constant summation. b) Current sums c) Control construction d) Cumulative sum

Description : CUSUM stands for __________ a) Constant summation. b) Current sums c) Control construction d) Cumulative sum

Last Answer : Cumulative sum

___ is the system to reduce the amount of energy input into the system without negatively affecting the output. A) Energy Management. C) ISEER. B) Energy audit. D) Energy monitoring.

Description : ________ is the system to reduce the amount of energy input into the system without negatively affecting the output. A) Energy Management. C) ISEER. B) Energy audit. D) Energy monitoring.

Last Answer : Energy audit.

69. Level of production may have an effect on specific energy consumption. State a) True b) False

Description : 69. Level of production may have an effect on specific energy consumption. State a) True b) False

Last Answer : true

Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. B. Continuous cardiac output monitoring by the thermodilution method requires continuous infusion of fluid injectate at a constant rate and temperature. C. The major advantage of the Fick method over the thermodilution method of calculating cardiac output is that it is noninvasive, requiring only the determination of oxygen consumption by respiratory gas analysis. D. The technique of thoracic electrical bioimpedance utilizes sensors to determine stroke volume by detecting changes in resistance to a small, applied alternating current.

Description : Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. ... stroke volume by detecting changes in resistance to a small, applied alternating current.

Last Answer : Answer: AD DISCUSSION: Various techniques are available to measure cardiac output continuously. The advantages of continuous cardiac output monitoring, as compared with intermittent methods, are (1) ... function of the stroke volume, which then can be used to calculate the cardiac output

The strategy of adjusting and optimising energy using systems and procedures so as to reduce energy requirements per unit of output while holding constant or reducing total cost of producing the output from the systems is…………. a) Energy Management b) Energy audit c) Energy utilisation d) Energy wastage

Description : The strategy of adjusting and optimising energy using systems and procedures so as to reduce energy requirements per unit of output while holding constant or reducing total cost of producing the output from the ... is . a) Energy Management b) Energy audit c) Energy utilisation d) Energy wastage

Last Answer : Energy Management

A waste heat recovery system in industrial process has been key to reduce ....... Consumption. a) Coal b) Fuel c) Biogas d) Oil

Description : A waste heat recovery system in industrial process has been key to reduce ....... Consumption. a) Coal b) Fuel c) Biogas d) Oil

Last Answer : Fuel

.As part of audit planning, CPAs should design audit programs for each individual audit and should include audit steps and procedures to a. Ensure that only material items are audited. b. Provide assurance that the objectives of the audit are met. c. Detect and eliminate fraud. d. Increase the amount of management information available

Description : .As part of audit planning, CPAs should design audit programs for each individual audit and should include audit steps and procedures to a. Ensure that only material items are audited. b. Provide ... are met. c. Detect and eliminate fraud. d. Increase the amount of management information available

Last Answer : Provide assurance that the objectives of the audit are met.

A procedure in which a quality control partner periodically tests the application of quality control procedures is most directly related to which quality control element? a. Engagement performance b. Independence, integrity, and objectivity c. Monitoring d. Personnel management

Description : A procedure in which a quality control partner periodically tests the application of quality control procedures is most directly related to which quality control element? a. Engagement performance b. Independence, integrity, and objectivity c. Monitoring d. Personnel management

Last Answer : Monitoring

Quality control in the final analysis is : 1. using the technical procedures of monitoring project results to decide if the outputs meet the requirements 2. a production system 3. an inspection system 4. fitness for purpose

Description : Quality control in the final analysis is : 1. using the technical procedures of monitoring project results to decide if the outputs meet  the requirements  2. a production system  3. an inspection system  4. fitness for purpose

Last Answer : 1. using the technical procedures of monitoring project results to decide if the outputs meet  the requirements

Poor scattering on trend line of production Vs Energy consumption indicates . a) poor level of control b) good level of control c) both the above d) none of above.

Description : Poor scattering on trend line of production Vs Energy consumption indicates . a) poor level of control b) good level of control c) both the above d) none of above.

Last Answer : poor level  of control

Poor scattering on trend line of production Vs Energy consumption indicates ___. a) poor level of control b) good level of control c) both the above d) none of above

Description : Poor scattering on trend line of production Vs Energy consumption indicates ___. a) poor level of control b) good level of control c) both the above d) none of above

Last Answer : poor level of control

Which of the following initiatives of dynamic cloud infrastructure reduce operating cost , improve responsiveness and utilize resources? A. Asset management. B. Virtualization and Consolidation. C. Service Management. D. Information Infrastructure.

Description : Which of the following initiatives of dynamic cloud infrastructure reduce operating cost , improve responsiveness and utilize resources? A. Asset management. B. Virtualization and Consolidation. C. Service Management. D. Information Infrastructure.

Last Answer : Virtualization and Consolidation.

86. To apply Shewhart-cusum combined procedure, the Shewhart control limits should be applied almost standard deviation from the center. a) 2 b) 1 c) 1.5 d) 3.5

Description : 86. To apply Shewhart-cusum combined procedure, the Shewhart control limits should be applied almost standard deviation from the center. a) 2 b) 1 c) 1.5 d) 3.5

Last Answer : 2

105. Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None

Description : 105. Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None

Last Answer : Specific Energy Consumption

103. What is specific energy consumption. a) energy consumption per month b) Energy consumed per unit of production c) energy consumption per year d) none of the above

Description : 103. What is specific energy consumption. a) energy consumption per month b) Energy consumed per unit of production c) energy consumption per year d) none of the above

Last Answer : Energy consumed per unit of production

Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None

Description : Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None

Last Answer : Specific Energy Consumption

________ to reduce or control energy consumption. a] Determining c] Highlighting b] Recording d] Setting Targets

Description : ________ to reduce or control energy consumption. a] Determining c] Highlighting b] Recording d] Setting Targets

Last Answer : setting targets

.If specific information comes to an auditor's attention that implies the existence of possible illegal acts that could have amaterial, but indirect effect on-the financialstatements, the auditor should nexta. Report the matter to an appropriate levelof management at least one level abovethose involved.b. Apply audit procedures specificallydirected to ascertaining whether anillegal act has occurred.c. Seek the advice of an informed expertqualified to practice law as to possiblecontingent liabilities.d. Discuss the evidence with the client'saudit committee, or others withequivalent authority.

Description : .If specific information comes to an auditor's attention that implies the existence of possible illegal acts that could have a material, but indirect effect on-the financial statements, the auditor ... d. Discuss the evidence with the client's audit committee, or others with equivalent authority.

Last Answer : Apply audit procedures specifically directed to ascertaining whether an illegal act has occurred

19. An energy policy does not include a) Target energy consumption reduction b) Time period for reduction c) Declaration of top management commitment d) Future production projection

Description : An energy policy does not include a) Target energy consumption reduction b) Time period for reduction c) Declaration of top management commitment d) Future production projection

Last Answer : Future production projection

An energy policy does not include …… a) Target Energy Consumption Reduction b) Time Period for Reduction c) Declaration of top Management Commitment d) Future Production Projection

Description : An energy policy does not include …… a) Target Energy Consumption Reduction b) Time Period for Reduction c) Declaration of top Management Commitment d) Future Production Projection

Last Answer :  Future Production Projection

Safeguards that may eliminate or reduce threats to independence to an acceptable level fall in the following categories except: a. Safeguards created by the profession, legislation or regulation b. Firm-wide safeguards c. Engagement specific safeguards d. Safeguards created by the client

Description : Safeguards that may eliminate or reduce threats to independence to an acceptable level fall in the following categories except: a. Safeguards created by the profession, legislation or regulation b. Firm-wide safeguards c. Engagement specific safeguards d. Safeguards created by the client

Last Answer : Safeguards created by the client

After studying and evaluating a client's existing internal control, an auditor has concluded that the policies and procedures are well-designed and functioning as intended. Under these circumstances, the auditor would most likely a. Perform further control tests to the extent outlined in the audit program. b. Determine the control policies and procedures that should prevent or detect errors and fraud. c. Set detection risk at a higher level than would be set under conditions of weak internal control. d. Set detection risk at a lower level than would be set under conditions of weak internal control.

Description : After studying and evaluating a client's existing internal control, an auditor has concluded that the policies and procedures are well-designed and functioning as intended. Under these circumstances, the ... risk at a lower level than would be set under conditions of weak internal control.

Last Answer : Set detection risk at a higher level than would be set under conditions of weak internal control.

One of the key areas for ....... energy saving in existing systems is waste heat recovery. a) Potential b) Kinetic c) Thermal d) Electrical

Description : One of the key areas for ....... energy saving in existing systems is waste heat recovery. a) Potential b) Kinetic c) Thermal d) Electrical

Last Answer : Potential

Which statement best describes the emphasis of the systems and substantive approaches in the audit plan? a. A thoroughly designed systems approach to auditing can eliminate the need for any substantive procedures. b. The systems approach focuses on detailed testing of specific accounts for accuracy, while the substantive approach is the testing controls to make sure they are effective. c. The systems approach focuses on testing controls to make sure they are effective, while the substantive approach is the detailed testing of specific accounts for accuracy. d. The systems approach focuses on the use of computer systems to aid in the audit while the substantive approach focuses on more manual tests

Description : Which statement best describes the emphasis of the systems and substantive approaches in the audit plan? a. A thoroughly designed systems approach to auditing can eliminate the need for any ... computer systems to aid in the audit while the substantive approach focuses on more manual tests

Last Answer : The systems approach focuses on testing controls to make sure they are effective, while the substantive approach is the detailed testing of specific accounts for accuracy

Tissue culture is a good technique to a) Cross two varieties b) Rapidly increase the size of a trees by strengthening the stem c) Eliminate virus d) Improve yield of crops

Description : Tissue culture is a good technique to a) Cross two varieties b) Rapidly increase the size of a trees by strengthening the stem c) Eliminate virus d) Improve yield of crops 

Last Answer : c) Eliminate virus 

Audit programs generally include procedures to test actual transactions and resulting balances. These procedures are primarily designed to a. Detect irregularities that result in misstated financial statements. b. Test the adequacy of internal control. c. Gather corroborative evidence. d. Obtain information of informative disclosures

Description : Audit programs generally include procedures to test actual transactions and resulting balances. These procedures are primarily designed to a. Detect irregularities that result in misstated financial ... control. c. Gather corroborative evidence. d. Obtain information of informative disclosures

Last Answer : Gather corroborative evidence

A operational audit is primarily oriented toward a. Future improvements to accomplish management’s goals. b. Past protection provided by existing internal control. c. Operational information is in accordance with generally accepted accounting principles. d. Financial statements are fairly presented.

Description : A operational audit is primarily oriented toward a. Future improvements to accomplish management’s goals. b. Past protection provided by existing internal control. c. Operational information is in accordance with generally accepted accounting principles. d. Financial statements are fairly presented.

Last Answer : Future improvements to accomplish management’s goals.