Poor scattering on trend line of production Vs Energy consumption indicates . a) poor level of control b) good level of control c) both the above d) none of above.

Poor scattering on trend line of production Vs Energy consumption indicates . a) poor level of control b) good level of control c) both the above d) none of above.
by

1 Answer

Answer :

poor level  of control
by

Related questions

Poor scattering on trend line of production Vs Energy consumption indicates ___. a) poor level of control b) good level of control c) both the above d) none of above

Description : Poor scattering on trend line of production Vs Energy consumption indicates ___. a) poor level of control b) good level of control c) both the above d) none of above

Last Answer : poor level of control

106. What type of data is useful to find out the fixed energy consumption? a) SEC Vs production b) SEC Vs Energy c) Production Vs energy d) None

Description : 106.What type of data is useful to find out the fixed energy consumption? a) SEC Vs production b) SEC Vs Energy c) Production Vs energy d) None

Last Answer : Production Vs energy

108. is primarily a management technique that uses energy information as a basis to eliminate waste, reduce and control current level of energy use and improve the existing operating procedures. a) Energy monitoring and targeting b) CUSUM c) Specific energy consumption d) Production

Description : 108.is primarily a management technique that uses energy information as a basis to eliminate waste, reduce and control current level of energy use and improve the existing operating procedures. a) Energy monitoring and targeting b) CUSUM c) Specific energy consumption d) Production

Last Answer : Energy monitoring and targeting

Rittinger's number designates the new surface created per unit mechanical energy absorbed by the material being crushed. Larger value of Rittinger's number of a material indicates its (A) Easier grindability (B) Poor grindability (C) High power consumption in grinding (D) None of these

Description : Rittinger's number designates the new surface created per unit mechanical energy absorbed by the material being crushed. Larger value of Rittinger's number of a material indicates its (A) Easier grindability (B) Poor grindability (C) High power consumption in grinding (D) None of these

Last Answer : (A) Easier grindability

What If the trend of production of fuel energy falls behind the levels of consumption what could result?

Description : What If the trend of production of fuel energy falls behind the levels of consumption what could result?

Last Answer : The most immediate result would be increased prices, thenreduced availability.

What If the trend of production of fuel energy falls behind the levels of consumption what could result?

Description : What If the trend of production of fuel energy falls behind the levels of consumption what could result?

Last Answer : The most immediate result would be increased prices, thenreduced availability.

69. Level of production may have an effect on specific energy consumption. State a) True b) False

Description : 69. Level of production may have an effect on specific energy consumption. State a) True b) False

Last Answer : true

there has been a rising trend in production and sale of farm machinery. a) From 1986 to 2000 b) From 1920 to 2005 c) From 1935 to 2000 d) None of the above

Description : there has been a rising trend in production and sale of farm machinery. a) From 1986 to 2000 b) From 1920 to 2005 c) From 1935 to 2000 d) None of the above

Last Answer : From 1986 to 2000

19. For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor c) Production factor d) Load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor c) Production factor d) Load factor

Last Answer : Utility factor

For a cement plant the parameter, ―kWh/MT of clinker ―indicates c) Energy Index parameter c) Production factor d) Utility factor d) load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates c) Energy Index parameter c) Production factor d) Utility factor d) load factor

Last Answer :  Energy Index parameter

For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter c) Production factor b) Utility factor d) load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter c) Production factor b) Utility factor d) load factor

Last Answer : Energy Index parameter

Plant level information can be found in? a) variable yield data b) energy consumption data c) both A & B d) none of the above

Description : Plant level information can be found in? a) variable yield data b) energy consumption data c) both A & B d) none of the above

Last Answer : energy consumption data

19. An energy policy does not include a) Target energy consumption reduction b) Time period for reduction c) Declaration of top management commitment d) Future production projection

Description : An energy policy does not include a) Target energy consumption reduction b) Time period for reduction c) Declaration of top management commitment d) Future production projection

Last Answer : Future production projection

As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Description : As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Last Answer : 18

An energy policy does not include …… a) Target Energy Consumption Reduction b) Time Period for Reduction c) Declaration of top Management Commitment d) Future Production Projection

Description : An energy policy does not include …… a) Target Energy Consumption Reduction b) Time Period for Reduction c) Declaration of top Management Commitment d) Future Production Projection

Last Answer :  Future Production Projection

Which of the variable does not contribute to energy consumption? a) Production b) Hours c) Climate d) none of the above

Description : Which of the variable does not contribute to energy consumption? a) Production b) Hours c) Climate d) none of the above

Last Answer : none of the above

One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) comparing the energy consumption C)Controlling the energy consumption d) Reducing the production

Description : One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) comparing the energy consumption C)Controlling the energy consumption d) Reducing the production

Last Answer :  Reducing the production

Energy monitoring and targeting is built on the principle of ― ‖. a)production can be reduced to achieve reduced energy consumption‖ b)Consumption of energy is proportional to production rate‖ c)You cannot manage what you do not measure‖ d)None of the above

Description : Energy monitoring and targeting is built on the principle of ― ‖. a)production can be reduced to achieve reduced energy consumption‖ b)Consumption of energy is proportional to production rate‖ c)You cannot manage what you do not measure‖ d)None of the above

Last Answer : You cannot manage what you do not measure‖

105. Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None

Description : 105. Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None

Last Answer : Specific Energy Consumption

103. What is specific energy consumption. a) energy consumption per month b) Energy consumed per unit of production c) energy consumption per year d) none of the above

Description : 103. What is specific energy consumption. a) energy consumption per month b) Energy consumed per unit of production c) energy consumption per year d) none of the above

Last Answer : Energy consumed per unit of production

102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Description : 102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Last Answer : Monthly energy consumption& monthly production

As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Description : 96.As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Last Answer : 18

68. One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) Comparing the energy consumption c) Controlling the energy consumption d) Reducing the production

Description : 68. One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) Comparing the energy consumption c) Controlling the energy consumption d) Reducing the production

Last Answer : Reducing the production

67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Description : 67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Last Answer : Monthly energy consumption& monthly production

64. For any company, energy consumption mostly relates to…….. a) Profits b) Inventory c) Production d) All the above

Description : 64. For any company, energy consumption mostly relates to…….. a) Profits b) Inventory c) Production d) All the above

Last Answer : Production

Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None

Description : Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None

Last Answer : Specific Energy Consumption

Energy monitoring and targeting is built on the principle of ― _____‖ a) ―production can be reduced to achieve reduced energy consumption‖ b) ―Consumption of energy is proportional to production rate‖ c) ―You cannot manage what you do not measure‖ d) None of the above.

Description : Energy monitoring and targeting is built on the principle of ― _____‖ a) ―production can be reduced to achieve reduced energy consumption‖ b) ―Consumption of energy is proportional to production rate‖ c) ―You cannot manage what you do not measure‖ d) None of the above.

Last Answer : You cannot manage what you do not measure

CUSUM technique provides __________ a) Deployment. b) Maintenance c) Development. d) Trend line

Description : CUSUM technique provides __________ a) Deployment. b) Maintenance c) Development. d) Trend line

Last Answer : Trend line

A ……… indicates the general direction in which a security price is headed a. trend b. ratio c. price d. none of the above

Description : A ……… indicates the general direction in which a security price is headed a. trend b. ratio c. price d. none of the above

Last Answer : A

is the identification of energy consumption level, which is desirable as a management objective to work towards energy conservation a) Recording b) Targeting c) Analysing d) Monitoring

Description : is the identification of energy consumption level, which is desirable as a management objective to work towards energy conservation a) Recording b) Targeting c) Analysing d) Monitoring

Last Answer : Targeting

________ to reduce or control energy consumption. a] Determining c] Highlighting b] Recording d] Setting Targets

Description : ________ to reduce or control energy consumption. a] Determining c] Highlighting b] Recording d] Setting Targets

Last Answer : setting targets

It is the method of random scattering of seeds on the surface of seedbed. a. Dibbing b. Drilling d. None of the above.

Description : It is the method of random scattering of seeds on the surface of seedbed. a. Dibbing b. Drilling d. None of the above.

Last Answer : Ans - c. Broadcasting

is the process of random scattering of seed on the surface of sead beds. a) Broadcasting. b) Dibbling c) Drilling. d) Transplanting

Description : is the process of random scattering of seed on the surface of sead beds. a) Broadcasting. b) Dibbling c) Drilling. d) Transplanting

Last Answer : Broadcasting.

Broadcasting is the process of random scattering of seed on the surface of seed beads. a. True b. False

Description : Broadcasting is the process of random scattering of seed on the surface of seed beads. a. True b. False

Last Answer : True

is type of Label allows consumers to compare the energy consumption of similar products. a) Comparative label b) Endorsement label c) Both a & b d) None of the above

Description : is type of Label allows consumers to compare the energy consumption of similar products. a) Comparative label b) Endorsement label c) Both a & b d) None of the above

Last Answer : Comparative label

9. Salient feature of Energy Conservation Act 2001 is (a) establishment of BEE (b) to prescribe energy conservation building codes for all buildings (c) to specify energy consumption (d) both (b) & (c)

Description : Salient feature of Energy Conservation Act 2001 is (a) establishment of BEE (b) to prescribe energy conservation building codes for all buildings (c) to specify energy consumption (d) both (b) & (c)

Last Answer : establishment of BEE 

ee star rating label just give _______ representation of the energy consumption levels byshowing star ratings. a. Physical c. Visual b. Both a and c d. None of the above

Description : Bee star rating label just give _______ representation of the energy consumption levels byshowing star ratings. a. Physical c. Visual b. Both a and c d. None of the above

Last Answer : Visual

Choke in a I.C. engine is used to control a) Camshaft speed b) Specific fuel consumption c) Air fuel mixture d) Crankshaft speed Ans. c

Description : Choke in a I.C. engine is used to control a) Camshaft speed b) Specific fuel consumption c) Air fuel mixture d) Crankshaft speed Ans. c

Last Answer : ans c

For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor

Last Answer :  Energy Index parameter 

Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms of permanganate number (C) Bagasse fibre contains both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

High value of BOD (Biochemical Oxygen Demand) indicates that (a) water is less polluted (b) consumption of organic matter in the water is higher by the microbes (c) water is pure (d) water is highly polluted.

Description : High value of BOD (Biochemical Oxygen Demand)  indicates that (a) water is less polluted (b) consumption of organic matter in the water is  higher by the microbes  (c) water is pure (d) water is highly polluted.

Last Answer : (b) consumption of organic matter in the water is 

High value of BOD (Biochemical Oxygen Demand) indicates that (a) water is less polluted (b) consumption of organic matter in the water is higher by the microbes (c) water is pure (d) water is highly polluted.

Description : High value of BOD (Biochemical Oxygen Demand) indicates that (a) water is less polluted (b) consumption of organic matter in the water is higher by the microbes (c) water is pure (d) water is highly polluted.

Last Answer : (b) consumption of organic matter in the water is higher by the microbes

Which of the following are NOT key constraints of the food processing industry? a) Inadequate quality control. c) High packaging cost b) Low demand. d) Poor infrastructure as in no cold storage

Description : Which of the following are NOT key constraints of the food processing industry? a) Inadequate quality control. c) High packaging cost b) Low demand. d) Poor infrastructure as in no cold storage

Last Answer : Low demand.

Heart murmur indicates a - (1) defective valve (2) poor oxygenation (3) dislocation of the heart (4) improper development of muscles

Description : Heart murmur indicates a - (1) defective valve (2) poor oxygenation (3) dislocation of the heart (4) improper development of muscles

Last Answer : (1) defective valve Explanation: Murmurs are pathologic heart sounds that are produced as a result of turbulent blood flow that is sufficient to produce audible noise. A functional murmur or " ... through which blood flows in or near the heart. Such murmurs are known as pathologic murmurs.

A switchboard ammeter indicates a reading slightly above 'zero' when the leads are disconnected, this is caused by _____________. A. mechanical misalignment of the meter pointer B. a poor ground for the meter case C. static electricity in the air D. capacitors inside the meter storing charges

Description : A switchboard ammeter indicates a reading slightly above 'zero' when the leads are disconnected, this is caused by _____________. A. mechanical misalignment of the meter pointer B. a poor ground for the meter case C. static electricity in the air D. capacitors inside the meter storing charges

Last Answer : Answer: A

High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor

Description : High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor

Last Answer : (B) It is highly paraffinic in nature

Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct process of by-product recovery (C) A high swelling index number of coking coal indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

Heart murmur indicates a (1) defective valve (2) poor oxygenation (3) dislocation of the heart (4) improper development of muscles

Description : Heart murmur indicates a (1) defective valve (2) poor oxygenation (3) dislocation of the heart (4) improper development of muscles

Last Answer : defective valve

Home gardening deals with vegetable production for: a. Home consumption b. For local market c. At commercial level d. All of these

Description : Home gardening deals with vegetable production for: a. Home consumption b. For local market c. At commercial level d. All of these

Last Answer : Home consumption

Energy consumption per unit of GDP is called as: a) Energy Ratio b) Energy intensity c) Per capita consumption d) None

Description : Energy consumption per unit of GDP is called as: a) Energy Ratio b) Energy intensity c) Per capita consumption d) None

Last Answer : Energy intensity