Description : As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18
Last Answer : 18
Description : 108.is primarily a management technique that uses energy information as a basis to eliminate waste, reduce and control current level of energy use and improve the existing operating procedures. a) Energy monitoring and targeting b) CUSUM c) Specific energy consumption d) Production
Last Answer : Energy monitoring and targeting
Description : 102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None
Last Answer : Monthly energy consumption& monthly production
Description : 67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None
Description : is a statistical technique which determines and quantifies the relationship between variables and enables standard equations to be established for energy consumption. a) linear regression analysis b) time-dependent energy analysis c) moving annual total d) CUSUM
Last Answer : a) linear regression analysis
Description : An energy policy does not include a) Target energy consumption reduction b) Time period for reduction c) Declaration of top management commitment d) Future production projection
Last Answer : Future production projection
Description : CUSUM technique provides __________ a) Deployment. b) Maintenance c) Development. d) Trend line
Last Answer : Trend line
Description : The energy consumption and production patterns in a chemical plant over a 9 month period is provided in the table below; Month 1 2 3 4 5 6 7 8 9 Production in Tonnes / month 493 ... and give your inference on the result ? ( consider 9 month data for evaluation for predicted energy consumption)
Last Answer : It is required to use the equations Y= mX + C and nC + mΣX = ΣY cΣX + mΣX2 = ΣXY Month X = Production in Tonnes / month Y =Energy Consumption MWh /month X 2 XY 1 493 78.2 ... 73.7 54756 17240.63 8 239 64.4 57121 15402.96 9 239 72.1 57121 17228.98 3387 665.3 1410683 253221
Description : An energy policy does not include …… a) Target Energy Consumption Reduction b) Time Period for Reduction c) Declaration of top Management Commitment d) Future Production Projection
Last Answer : Future Production Projection
Description : How data collected in case study method?
Last Answer : Case study research typically includes multiple data collection techniques and data are collected from multiple sources. Data collection techniques include interviews, observations (direct and ... data for case studies are:1.personal interviews2.direct observation3.psychometric testsarchival records
Description : 103. What is specific energy consumption. a) energy consumption per month b) Energy consumed per unit of production c) energy consumption per year d) none of the above
Last Answer : Energy consumed per unit of production
Description : 106.What type of data is useful to find out the fixed energy consumption? a) SEC Vs production b) SEC Vs Energy c) Production Vs energy d) None
Last Answer : Production Vs energy
Description : 105. Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None
Last Answer : Specific Energy Consumption
Description : Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None
Description : 89. Each vertical bar in cusum status chart represents a) The value of Ci+ and Ci– b) The value of Ci– c) The value of Ci+ d) Neither the value of Ci+ nor Ci–
Last Answer : The value of Ci+ and Ci–
Description : 86. To apply Shewhart-cusum combined procedure, the Shewhart control limits should be applied almost standard deviation from the center. a) 2 b) 1 c) 1.5 d) 3.5
Last Answer : 2
Description : 85. The value of K and H should be determined according to the ARL required for the corresponding cusum chart. a) True b) False
Last Answer : true
Description : 84. Each vertical bar in cusum status chart represents a) The value of Ci+ and Ci– b) The value of Ci– c) The value of Ci+ d) Neither the value of Ci+ nor Ci–
Description : CUSUM stands for __________ a) Constant summation. b) Current sums c) Control construction d) Cumulative sum
Last Answer : Cumulative sum
Description : 78 India‘s total primary energy consumption is a) 24.3 BTU b) 19.01 BTU c) 120 BTU d) 30.1 BTU
Last Answer : 30.1 BTU
Description : Two masses, one of the 10kg and the other unknown, are placed on a scale in a region where g = 9.67 m/sec2 . The combined weight of these two masses is 174.06 N. Find the unknown mass in kg. a. 20 kg b. 19 kg c. 18 kg d. 17 kg formula: m=Fg k / g
Last Answer : 18 kg
Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor c) Production factor d) Load factor
Last Answer : Utility factor
Description : Having how much months of production and energy data, we can plot a moving annual total a) Three. b) Five c) Twelve. d) six
Last Answer : twelve
Description : In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant ... ----- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh
Last Answer : d) 60,000 kWh
Description : Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th
Last Answer : Here, the minimum and maximum values of given data are 6 and 32 respectively. Range = 32 – 6 = 26
Description : The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th
Last Answer : In conclusion, the range of data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, and 20 is 26.
Last Answer : (d) In a given data, maximum value = 32 and minimum value = 6 We know, range of the data = maximum value – minimum value = 32 – 6 = 26 Hence, the range of the given data is 26.
Description : Mark the correct option relating to Protected saving scheme a) Twenty four months have been elapsed from the date of opening the account and during the said period all the month installments have been paid ... The claim applied for within one year of the death of the depositor e) All the above
Last Answer : e) All the above
Description : How to fix body health fast ? I am currently 20 years old , height 5 feet 6 inches and I weigh 49 kg and BMI 18.00 . When I was at home, 0.5 liters per day. I used to eat cow's milk but after ... to buy. How can I gain 10 kg weight in 3 months ?? Looking for the right advice to fix my health ???
Last Answer : It is not possible to gain weight fast. It will take some time to get fat or weight. Usually if you are a little fat you will gain weight. So I am not giving any separate tips for weight gain. You ... weight. Food: Drink vegetables , small fish , meat , eggs , milk , banana and water after a while.
Description : Plant level information can be found in? a) variable yield data b) energy consumption data c) both A & B d) none of the above
Last Answer : energy consumption data
Description : Primary data are BEST described as the : 1. first batch of data collected for a specific study 2. data that are observed, recorded, or collected from respondents 3. data that were compiled for ... than the current study 4. data that are collected from a computerized database 5. none of these
Last Answer : data that are observed, recorded, or collected from respondents
Description : Primary data are BEST described as the: A)first batch of data collected for a specific study B)data that are observed, recorded, or collected from respondents C)data that were compiled for some purpose other than the study current study D)data that are collected from a computerised data base
Last Answer : B)data that are observed, recorded, or collected from respondents
Description : Poor scattering on trend line of production Vs Energy consumption indicates . a) poor level of control b) good level of control c) both the above d) none of above.
Last Answer : poor level of control
Description : Which of the variable does not contribute to energy consumption? a) Production b) Hours c) Climate d) none of the above
Last Answer : none of the above
Description : One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) comparing the energy consumption C)Controlling the energy consumption d) Reducing the production
Last Answer : Reducing the production
Description : Energy monitoring and targeting is built on the principle of ― ‖. a)production can be reduced to achieve reduced energy consumption‖ b)Consumption of energy is proportional to production rate‖ c)You cannot manage what you do not measure‖ d)None of the above
Last Answer : You cannot manage what you do not measure‖
Description : 69. Level of production may have an effect on specific energy consumption. State a) True b) False
Description : 68. One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) Comparing the energy consumption c) Controlling the energy consumption d) Reducing the production
Description : 64. For any company, energy consumption mostly relates to…….. a) Profits b) Inventory c) Production d) All the above
Last Answer : Production
Description : Poor scattering on trend line of production Vs Energy consumption indicates ___. a) poor level of control b) good level of control c) both the above d) none of above
Description : Energy monitoring and targeting is built on the principle of ― _____‖ a) ―production can be reduced to achieve reduced energy consumption‖ b) ―Consumption of energy is proportional to production rate‖ c) ―You cannot manage what you do not measure‖ d) None of the above.
Last Answer : You cannot manage what you do not measure
Description : Estimates of a water supply project depends upon the rate of water supply per capita consumption and probable population estimated at the end of the design period of (A) 5 to 10 years (B) 10 to 15 years (C) 15 to 20 years (D) 20 to 30 years
Last Answer : (D) 20 to 30 years
Description : Why do scientists continue to study the Moon long after the Apollo program ended and list some of the types of data that have been collected.?
Last Answer : One type of data currently collected as a direct result of theApollo Program is the Lunar Laser Ranging Experiment. The ongoingLunar Laser Ranging Experiment measures the distance between theEarth and the Moon using ... (11, 14, and 15), and the time for the reflected light to return isdetermined.
Description : Which term refers to publishing several articles from the data collected in one large study? a. Duplicate publication b. Partial publication c. Triplicate publication d. None of these
Last Answer : b. Partial publication
Description : Hypotheses in qualitative research studies usually _____. a. Are very specific and stated prior to beginning the study b. Are often generated as the data are collected, interpreted, and analyzed c. Are never used d. Are always stated after the research study has been completed
Last Answer : b. Are often generated as the data are collected, interpreted, and analyzed
Description : Energy consumption per unit of GDP is called as: a) Energy Ratio b) Energy intensity c) Per capita consumption d) None
Last Answer : Energy intensity
Description : As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts
Last Answer : kg
Description : As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts
Last Answer : kwh
Description : 99. As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts
Last Answer : kg.