Description : Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None
Last Answer : Specific Energy Consumption
Description : 106.What type of data is useful to find out the fixed energy consumption? a) SEC Vs production b) SEC Vs Energy c) Production Vs energy d) None
Last Answer : Production Vs energy
Description : 102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None
Last Answer : Monthly energy consumption& monthly production
Description : 67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None
Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The heat treatment cycle is as follows; Increase temperature from 30 OC to 850 OC in 3 hours. ... efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50
Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30) = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8
Description : Tractors with less specific fuel consumption should be preferred because..... A. High efficiency C. Good output B. Good for field D. Less cost
Last Answer : Less cost
Description : 108.is primarily a management technique that uses energy information as a basis to eliminate waste, reduce and control current level of energy use and improve the existing operating procedures. a) Energy monitoring and targeting b) CUSUM c) Specific energy consumption d) Production
Last Answer : Energy monitoring and targeting
Description : 103. What is specific energy consumption. a) energy consumption per month b) Energy consumed per unit of production c) energy consumption per year d) none of the above
Last Answer : Energy consumed per unit of production
Description : 69. Level of production may have an effect on specific energy consumption. State a) True b) False
Last Answer : true
Description : Choke in a I.C. engine is used to control a) Camshaft speed b) Specific fuel consumption c) Air fuel mixture d) Crankshaft speed Ans. c
Last Answer : ans c
Description : As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18
Last Answer : 18
Description : 96.As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18
Description : In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant ... ----- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh
Last Answer : d) 60,000 kWh
Description : Total primary energy consumption of fuel in the world is lead by a) Coal b) Nuclear c) Hydro d) Oil
Last Answer : coal
Description : 71. Total primary energy consumption of fuel in the world is lead by a) Coal b) Nuclear c) Hydro d) Oil
Description : Heat recovery provides valuable energy sources and ....... consumption. a) Reduce energy b) Increase energy c) Increase fuel d) Reduce fuel
Last Answer : Reduce energy
Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )
Last Answer : a) Specific Energy Consumption of Induction Melting Furnace Molten Steel Production from the Induction melting furnace per day = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE = 655864000/107 = 65.586 ToE
Description : A manufacturing industry plans to improve its energy performance under PAT through implementation of an energy conservation scheme. After implementation, calculate the Plant Energy Performance (PEP) with 2015-16 as the ... 34,000 T, Reference year (2015-16 ) Energy consumption - 27,200 MWh.
Last Answer : Production factor (PF) = 28750/34000 = 0.846 …………………….1 mark Ref year equivalent energy (RYEE) = Ref Year Energy Use (RYEU) x PF = 27,200 x 0.846= 23011MWh
Description : What If the trend of production of fuel energy falls behind the levels of consumption what could result?
Last Answer : The most immediate result would be increased prices, thenreduced availability.
Description : An energy policy does not include a) Target energy consumption reduction b) Time period for reduction c) Declaration of top management commitment d) Future production projection
Last Answer : Future production projection
Description : An energy policy does not include …… a) Target Energy Consumption Reduction b) Time Period for Reduction c) Declaration of top Management Commitment d) Future Production Projection
Last Answer : Future Production Projection
Description : Poor scattering on trend line of production Vs Energy consumption indicates . a) poor level of control b) good level of control c) both the above d) none of above.
Last Answer : poor level of control
Description : Which of the variable does not contribute to energy consumption? a) Production b) Hours c) Climate d) none of the above
Last Answer : none of the above
Description : One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) comparing the energy consumption C)Controlling the energy consumption d) Reducing the production
Last Answer : Reducing the production
Description : Energy monitoring and targeting is built on the principle of ― ‖. a)production can be reduced to achieve reduced energy consumption‖ b)Consumption of energy is proportional to production rate‖ c)You cannot manage what you do not measure‖ d)None of the above
Last Answer : You cannot manage what you do not measure‖
Description : 68. One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) Comparing the energy consumption c) Controlling the energy consumption d) Reducing the production
Description : 64. For any company, energy consumption mostly relates to…….. a) Profits b) Inventory c) Production d) All the above
Last Answer : Production
Description : Poor scattering on trend line of production Vs Energy consumption indicates ___. a) poor level of control b) good level of control c) both the above d) none of above
Description : Energy monitoring and targeting is built on the principle of ― _____‖ a) ―production can be reduced to achieve reduced energy consumption‖ b) ―Consumption of energy is proportional to production rate‖ c) ―You cannot manage what you do not measure‖ d) None of the above.
Last Answer : You cannot manage what you do not measure
Description : Use of economiser in a boiler plant reduces the fuel consumption for steam generation by about __________ percent. (A) 1 (B) 10 (C) 30 (D) 50
Last Answer : (B) 10
Description : A waste heat recovery system in industrial process has been key to reduce ....... Consumption. a) Coal b) Fuel c) Biogas d) Oil
Last Answer : Fuel
Description : The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another. a. specific heat b. heat of expansion c. latent heat d. useful heat
Last Answer : latent heat
Description : The average domestic consumption under normal conditions in an Indian city per day per person, is (A) 105 litres (B) 115 litres (C) 125 litres (D) 135 litres
Last Answer : (D) 135 litres
Description : Its …….. goal is to meet in said pattern by providing all the necessary data on the energy consumption as well as certain driving factors as identified during preliminary investigation. a. Secondary. c. Primary b. Tertiary. d. None.
Last Answer : primary
Description : 92. Its …….. goal is to meet in said pattern by providing all the necessary data on the energy consumption as well as certain driving factors as identified during preliminary investigation. a. Secondary. c. Primary b. Tertiary. d. None
Description : Plant level information can be found in? a) variable yield data b) energy consumption data c) both A & B d) none of the above
Last Answer : energy consumption data
Description : The specific fuel consumption of a petrol engine compared to diesel engine of same H.P is A. same B.more C. less D. unpredictable
Last Answer : ANSWER : B
Description : The specific fuel consumption for diesel engine is approximately A. 0.15 kg/kWh B. 0.2 kg/kWh C. 28 kg/kWh D. 0.36 kg/kWh
Description : If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency
Last Answer : Ans :c
Description : Specific fuel consumption is defined as a. fuel consumption per hour b. fuel consumed per km. c. fuel consumed per BHP d. fuel consumed per hour per BHP
Last Answer : ANSWER d. fuel consumed per hour per BHP
Description : The specific fuel consumption per BHP hour for petrol engine is approximately a. 0.1 kg b. 0.2 kg c. 0.25 kg d. 0.35 kg
Last Answer : ANSWER c. 0.25 kg
Description : The specific fuel consumption per BHP hour for diesel engine is approximately a. 0.1 kg b. 0.2 kg c. 0.3 kg d. 0.4 kg
Last Answer : ANSWER b. 0.2 kg
Description : Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year. 60% 70% 80% Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production ... activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300
Last Answer : (b) Rs 370,300
Description : Given E = 40xyi + 20x 2 j + 2k. Calculate the potential between two points (1,-1,0) and (2,1,3). a) 105 b) 106 c) 107 d) 108
Last Answer : b) 106
Description : The label which allows consumer to compare the energy consumption of similar products and factor lifetime running cost into their purchasing decisions. A. Comparative label. B. Endorsement label. C) Standard label. D) None of the above.
Last Answer : comparative label
Description : BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery
Last Answer : savings in electricity consumption
Description : Allow consumer to compare the energy consumption of similar products and factor life time running cost into their purchasing decision is called as A) Comparative label C) category label B) Endorsement label D) none of the above
Last Answer : Comparative label
Description : According to -energy audit means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis ... act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act
Last Answer : Energy conservation act 2001
Description : Which of the following statement(s) is/are true concerning the role of antibiotics in wound care? a. Systemic antibiotics are indicated for all open wounds b. Bacterial resistance can occur with ... of tissue on quantitative analysis d. Silver sulfadiazine is useful only for the management of burns
Last Answer : Answer: c The role of antibiotics in wound care is controversial. All open wounds are colonized with bacteria. Only when surrounding tissue is invaded (cellulitis) are systemic antibiotics clearly ... of relevant drug-resistant plasmids in bacteria, and its low cost make it a good choice