is the identification of energy consumption level, which is desirable as a management objective to work towards energy conservation
 
a)    Recording
b)    Targeting
c)    Analysing
d)    Monitoring

1 Answer

Answer :

Targeting

Related questions

Description : One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) comparing the energy consumption C)Controlling the energy consumption d) Reducing the production

Last Answer :  Reducing the production

Description : 68. One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) Comparing the energy consumption c) Controlling the energy consumption d) Reducing the production

Last Answer : Reducing the production

Description : 108.is primarily a management technique that uses energy information as a basis to eliminate waste, reduce and control current level of energy use and improve the existing operating procedures. a) Energy monitoring and targeting b) CUSUM c) Specific energy consumption d) Production

Last Answer : Energy monitoring and targeting

Description : 109.is essentially aimed at preserving an established pattern. a) Targeting b) Analysing c) Monitoring d) ecording

Last Answer : Monitoring

Description : Energy monitoring and targeting is built on the principle of ― ‖. a)production can be reduced to achieve reduced energy consumption‖ b)Consumption of energy is proportional to production rate‖ c)You cannot manage what you do not measure‖ d)None of the above

Last Answer : You cannot manage what you do not measure‖

Description : Energy monitoring and targeting is built on the principle of ― _____‖ a) ―production can be reduced to achieve reduced energy consumption‖ b) ―Consumption of energy is proportional to production rate‖ c) ―You cannot manage what you do not measure‖ d) None of the above.

Last Answer : You cannot manage what you do not measure

Description : A management goal to work towards energy __________. A) preservation C) conservation B) consumption D) all of above.

Last Answer : conservation

Description : Energy monitoring and targeting is …………. a. primary management techniques b. secondary management techniques c. tertiary management techniques d. None

Last Answer : primary management techniques

Description : Energy monitoring and targeting is primarily a management technique that use Energy system on basic to A) Eliminate waste C) Reduce pollution B) Both A & C are correct D) None of above

Last Answer : Eliminate waste

Description : Energy monitoring and targeting is primarily a____________ technique. A) management C) information B) installation D) none of above

Last Answer : management

Description : Comparing energy consumption to the set target on a regular basis is called as _____. a]Reporting c] Determining b] Recording d] monitoring

Last Answer : monitoring

Description : According to -energy audit means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis ... act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act

Last Answer : Energy conservation act 2001

Description : ______is essentially aimed at establishing the existing pattern of energy consumption a. Energy Monitoring b. Energy Targeting c. energy audit d. none of these

Last Answer : Ans:- a. Energy Monitoring

Description : Monitoring and targeting programs have been so effective that they show typical reductions in annual energy cost in the various industrial sectors between………. a. 10 to 30 % c. 5 to 20% b. 5 to 10 % d. 5 to 30%

Last Answer : 5 to 20%

Description : 98.Monitoring and targeting programs have been so effective that they show typical reductions in annual energy cost in the various industrial sectors between………. a. 10 to 30 % c. 5 to 20% b. 5 to 10 % d. 5 to 30%

Last Answer : 5 to 20%

Description : The Monitoring and Targeting programs they show typical elections in annual energy costs A) selection C) power B) election D) none of above

Last Answer : none of above

Description : The M & T system stand for a) Market and Trading system b) Monitoring and Targeting system c) Market and Targeting System d) None of the above

Last Answer : Monitoring and Targeting system

Description : Most specifically, marketing strategy : 1. Is concerned with key dicissions requried to reach an objective 2. Encompasses selecting and analysing a target market and creating and maintaining an ... 4. Involves determining the direction and objectives of marketing management 5. None of these

Last Answer : Encompasses selecting and analysing a target market and creating and maintaining an appropriate marketing mix

Description : Most specifically, marketing strategy: A)is concerned with key decisions required to reach an objective VU Cafeteria B)encompasses selecting and analysing a target market and creating ... to serve larger geographic areas D)involves determining the direction and objectives of marketing management

Last Answer : B)encompasses selecting and analysing a target market and creating and maintaining an appropriate marketing mix

Description : is the Objective of the energy management from the following :- a) To give each product a label b) To evolve minimum energy consumption c) To minimize environmental effects d) To achieve optimum energy procurement

Last Answer :  To evolve minimum energy consumption 

Description : monitoring is essentially aimed at establishing the existing ………. of energy consumption. A) surface C) marking B) pattern D) none of above.

Last Answer : pattern

Description : What consists of the identification of risks or threats, the implementation of security measures, and the monitoring of those measures for effectiveness? a. Risk management b. Risk assessment c. Security d. None of the above

Last Answer : a. Risk management

Description : Software safety is a ................... activity that focuses on the identification and assessment of potential hazards that may affect software negatively and cause an entire ... monitoring and management (B) Software quality assurance (C) Software cost estimation (D) Defect removal efficiency

Last Answer : (B) Software quality assurance

Description : ________ to reduce or control energy consumption. a] Determining c] Highlighting b] Recording d] Setting Targets

Last Answer : setting targets

Description : Salient feature of Energy Conservation Act 2001 is (a) establishment of BEE (b) to prescribe energy conservation building codes for all buildings (c) to specify energy consumption (d) both (b) & (c)

Last Answer : establishment of BEE 

Description : The primary objective of energy audit is to determine ways to ______ energy consumption per unit of product output. A. Increase. C) Slightly increase. B. Reduce. D) Change.

Last Answer : reduce

Description : The two steps of developing a marketing strategy include selecting and analysing a target market and: A)selecting a group of persons towards which the firm should direct its marketing efforts. B) ... D)developing a marketing mix that precisely meets the needs of individuals in the target market.

Last Answer : D)developing a marketing mix that precisely meets the needs of individuals in the target market.

Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution c) Energy pricing b) Monitoring and verification d) Bench marking

Last Answer : Bench marking

Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution b) Monitoring and verification c) Energy pricing d) Bench marking 23. Infrared thermometer is used

Last Answer : Bench marking

Description : Arrange the steps involved in Energy Management strategy A- Set up energy monitoring and reporting system B- Appoint energy management C- Conduct energy audit D- Identify the strategic corporate approach a) D – B – A - C b) A - B – C – D c) D – A – B – C d) C – A – B – C

Last Answer : D – B – A - C

Description : ________ is the system to reduce the amount of energy input into the system without negatively affecting the output. A) Energy Management. C) ISEER. B) Energy audit. D) Energy monitoring.

Last Answer : Energy audit.

Description : _________ is a level of quality or attainment. A) Standards C) monitoring energy B) Labels D) none of the above

Last Answer : standards

Description : Power based upon identification with a person who has desirable resources or personal traits is known as (a) Coercive power ; (b) Legitimate power ; (c) Expert power ; (d) Referent power

Last Answer :  (d) Referent power

Description : system to reduce the amount of energy input into the system without negatively affecting the output(s)‖. Is the definition of? a. Energy conservation c. Energy policy b. Energy management d. Energy Audit

Last Answer : Energy Audit

Description : The judicious and effective use of energy to maximise profits and enhance competitive positions‖. This can be the definition of: a) Energy conservation b) Energy management c) Energy policy d) Energy Audit

Last Answer : Energy management

Description : The judicious and effective use of energy to maximise profits and enhance competitive positions‖. This can be the definition of: e)Energy conservation c) Energy management f)Energy policy d) Energy Audit

Last Answer :  Energy management 

Description : The judicious and effective use of energy to maximise profits and enhance competitive positions‖. This can be the definition of: a) Energy conservation c) Energy management b) Energy policy d) Energy Audit

Last Answer : c

Description : To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Last Answer : Energy Management 

Description : The Objective of Energy Management includes a. Minimising Energy Costs b. Minimising Environmental Degradation c. Minimissing waste d. All of the above

Last Answer :  All of the above

Description : The objective of energy management includes a) Minimising energy costs b) Minimising waste c) Minimising environmental degradation d) All the above

Last Answer :  All the above

Description : The objective of energy management includes a) Minimising energy costs b) Minimising waste c) Minimising environmental degradation d) All the above

Last Answer : all of the above

Description : The objective of energy management includes g)Minimising energy costs c) Minimising environmental degradation h)Minimising waste d) all the above

Last Answer : all the above

Description : 113. The objective of energy management includes c) Minimising energy costs c) Minimising environmental degradation d) Minimising waste d) all the above

Last Answer : all the above

Description : The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Last Answer : All of the above

Description : Which of the following is not a part of energy audit as per the Energy Conservation Act, 2001? a) monitoring and analysis of energy use b) verification of energy use c) submission of technical report with recommendations d) ensuring implementation of recommended measures followed by review

Last Answer : d) ensuring implementation of recommended measures followed by review

Description : Unit power available for crop production is about 0.54hp/ha whereas desirable level is about ……. b. 2hp/ha c. 3hp/ha d. 2.5 hp/ha

Last Answer : Ans- a. 1hp/ha

Description : An energy policy does not include a) Target energy consumption reduction b) Time period for reduction c) Declaration of top management commitment d) Future production projection

Last Answer : Future production projection

Description : An energy policy does not include …… a) Target Energy Consumption Reduction b) Time Period for Reduction c) Declaration of top Management Commitment d) Future Production Projection

Last Answer :  Future Production Projection

Description : A critical feature of M&T is to understand____ a) energy management. b) what drives energy consumption c) product configuration d) none of the above

Last Answer : what drives energy consumption

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8