The technique of temporarily delaying
outgoing acknowledgements so that they can
be hooked onto the next outgoing data frame is
called ____________
a. piggybacking
b. cyclic redundancy check
c. fletcher’s checksum
d. parity check

1 Answer

Answer :

a. piggybacking

Related questions

Description : The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ A. piggybacking B. cyclic redundancy check C. fletcher’s checksum D. parity check

Last Answer : A. piggybacking

Description : In IT, the technique of delaying outgoing acknowledgements temporarily is known as (1) AR Acknowledgement (2) AR request (3) Piggybacking (4) Piggyframing

Last Answer : AR request

Description : Using which method in transport layer data integrity can be ensured? a. Checksum b. Repetition codes c. Cyclic redundancy checks d. Error correcting codes

Last Answer : a. Checksum

Description : Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Last Answer : Simple parity check

Description : Using which layer in transport layer data integrity can be assured? A. Checksum B. Repetition codes C. Cyclic redundancy checks D. Error correction codes

Last Answer : A. Checksum 

Description : Which error detection method usesone's complement arithmetic? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Last Answer : Checksum

Description : Which error detection method uses one's complement arithmetic? A. Simple parity check B. Two-dimensional parity check C. CRC D. Checksum

Last Answer : D. Checksum

Description : An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Last Answer : Frame check sequence

Description : CRC stands for __________ a. cyclic redundancy check b. code repeat check c. code redundancy check d. cyclic repeat check

Last Answer : a. cyclic redundancy check

Description : CRC stands for __________ A. cyclic redundancy check B. code repeat check C. code redundancy check D. cyclic repeat check

Last Answer : A. cyclic redundancy check

Description : In a frame transmission, CRC stands for (A) Code Renewable Check (B) Cyclic Redundancy Check (C) Control and Refresh Code (D) Cyclic Refreshing of CPU

Last Answer : (B) Cyclic Redundancy Check

Description : Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Last Answer : cyclic redundancy codes

Description : The divisor in a cyclic code is normally called the _________. A) degree B) generator C) redundancy D) none of the above

Last Answer : generator

Description : . In cyclic redundancy checking, the divisor is _______the CRC. A) The same size as B) one bit less than C) one bit more than D) none of the above

Last Answer : one bit more than

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

Description : Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet ... and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Last Answer : Ethernet frame includes a CRC field and IP packet includes a checksum field

Description : If the frame to be transmitted is 1101011011 and the CRC polynomial to be used for generating checksum is x 4+ x + 1, then what is the transmitted frame? a. 11010110111011 b. 11010110111101 c. 11010110111110 d. 11010110111001

Last Answer : c. 11010110111110

Description : Is the cyclic redundancy check better than hamming code?

Last Answer : It depends on what you are doing.The cyclic redundancy check will only detect an error, while thehamming code can also correct many types of errors. However toperform this correction the extra ... channels, disk sectors).Normally hamming code is done on individual bytes or words ofcomputer memory.

Description : A simple parity-check code can detect __________ errors A. an even-number of B. two C. no errors D. an odd-number of

Last Answer : D. an odd-number of

Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size

Description : Which processes does TCP, but not UDP, use? a. Windowing b. Acknowledgements c. Both a and b d. Destination Port

Last Answer : c. Both a and b

Description : Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception ... message b. Provision of checksum computation c. Both a & b d. None of the above

Last Answer : Provision of sequence number in the header of message

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

Description : UDP packets are called as _________ a. Segments b. Checksum c. Frames d. Datagrams

Last Answer : d. Datagrams

Description : The checksum of0000 and0000 is__________. A) 1111 B) 0000 C) 1110 D) 0111

Last Answer : 0111

Description : The checksum of1111 and1111 is_________. A) 1111 B) 0000 C) 1110 D) 0111

Last Answer : 1110

Description : The IPv4header field formerly knownas the service type field is now calledthe _______ field. A) IETF B) checksum C) differentiatedservices D) noneof the above

Last Answer : differentiatedservices

Description : Which of the following summation operations is performed onthe bits to checkanerror-detecting code? A. Codec B. Coder-decoder C. Checksum D. Attenuation

Last Answer : Checksum

Description : DNS can obtain the of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Last Answer : B) IP address

Description : Which of the following is not a field in TCP header? a. Sequence number b. Fragment offset c. Checksum d. Window size

Last Answer : b. Fragment offset

Description : Which one of the following fields of an IP header is NOT modified by a typical IP router? a. Checksum b. Source address c. Time to Live (TTL) d. Length

Last Answer : b. Source address

Description : Which field/s of ICMPv6 packet header has/have a provision of minimal integrity level concerning to verification for ICMP messages? a. Type b. Code c. Checksum d. All of the above

Last Answer : c. Checksum

Description : Define checksum. What are the steps followedinchecksumgenerator?

Last Answer : The error detection method used by the higher layer protocol iscalledchecksum. Checksumisbased on redundancy. a) Units are divided into k sections eachof n bits. b) All sectionsareaddedtogetherusing ... get the sum. c) The sumis complemented andbecomethechecksum.d)Thechecksumissent with the data.

Description : _____ provides redundancy toensure synchronization and inherent errordetection. A) Block coding B) Line coding C) Scrambling D) None of the above

Last Answer : Block coding

Description : Database management systems are intended to: A. eliminatedata redundancy B. establishrelationships among records in different files C. manage file access D. maintaindata integrity E. All of theabove

Last Answer : All of theabove

Description : A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP traffic c. stop ... address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Last Answer : d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : ______ is a static algorithm in which every incoming packet is sent out on every outgoing line except the one it arrives on. This method usually generates vast number of duplicate packets.. A. Flooding B. Wait and watch C. congestion D. both a and c

Last Answer : A. Flooding

Description : A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Last Answer : bridge

Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Last Answer : Binary codes

Description : Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above

Last Answer : Both of the above

Description : While transmitting odd-parity coded symbols, the number of zeros in each symbol is a. odd b. even c. a and b both d. unknown

Last Answer : unknown

Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait

Description : The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : FHSS

Description : The..............layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation

Last Answer : A) Physical

Description : If im the account holder for two lines how can i check for the other lines outgoing/inbox txt messages?

Last Answer : Yeah, it sounds like you’re trying to spy on someone. That’s not cool. If you have beef with someone, talk to them. If you think they’re committing a crime, go to the police. Snooping around is only going to make it worse in the end, whatever horrible thing you feel has happened.

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

Description : __________ allows easier movement of items by fork lift trucks between internal destinations in the warehouse. A)unit loading B)piggybacking C)containerisation D)inventory management E)priority transportation

Last Answer : A)unit loading