Description : Which of the variable does not contribute to energy consumption? a) Production b) Hours c) Climate d) none of the above
Last Answer : none of the above
Description : 108.is primarily a management technique that uses energy information as a basis to eliminate waste, reduce and control current level of energy use and improve the existing operating procedures. a) Energy monitoring and targeting b) CUSUM c) Specific energy consumption d) Production
Last Answer : Energy monitoring and targeting
Description : In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant ... ----- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh
Last Answer : d) 60,000 kWh
Description : As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18
Last Answer : 18
Description : 96.As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18
Description : Sub metering data helps to determine which data. a) financial data b) yield data c) system level performance data d) none of the above
Last Answer : yield data
Description : Poor scattering on trend line of production Vs Energy consumption indicates . a) poor level of control b) good level of control c) both the above d) none of above.
Last Answer : poor level of control
Description : Poor scattering on trend line of production Vs Energy consumption indicates ___. a) poor level of control b) good level of control c) both the above d) none of above
Description : A manufacturing industry plans to improve its energy performance under PAT through implementation of an energy conservation scheme. After implementation, calculate the Plant Energy Performance (PEP) with 2015-16 as the ... 34,000 T, Reference year (2015-16 ) Energy consumption - 27,200 MWh.
Last Answer : Production factor (PF) = 28750/34000 = 0.846 …………………….1 mark Ref year equivalent energy (RYEE) = Ref Year Energy Use (RYEU) x PF = 27,200 x 0.846= 23011MWh
Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )
Last Answer : a) Specific Energy Consumption of Induction Melting Furnace Molten Steel Production from the Induction melting furnace per day = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE = 655864000/107 = 65.586 ToE
Description : is type of Label allows consumers to compare the energy consumption of similar products. a) Comparative label b) Endorsement label c) Both a & b d) None of the above
Last Answer : Comparative label
Description : Salient feature of Energy Conservation Act 2001 is (a) establishment of BEE (b) to prescribe energy conservation building codes for all buildings (c) to specify energy consumption (d) both (b) & (c)
Last Answer : establishment of BEE
Description : Equipment level information is obtained from ____ & ____ a) name plate data & schedule information b) low unit cost & financial data c) Both a & b d) none of the above
Last Answer : name plate data & schedule information
Description : is the identification of energy consumption level, which is desirable as a management objective to work towards energy conservation a) Recording b) Targeting c) Analysing d) Monitoring
Last Answer : Targeting
Description : 69. Level of production may have an effect on specific energy consumption. State a) True b) False
Last Answer : true
Description : Labels show information such as a) Brand name c) product category b) Energy consumption of the product d) All of above
Last Answer : All of above
Description : Function of endorsement label is ___. a) Gives necessary information b) Target limits on energy performance c) Allow consumers to compare the energy consumption of similar products d) Provide a certification to inform prospective purchasers
Last Answer : Provide a certification to inform prospective purchasers
Description : The function of comparative label is ____ a) Allow consumers to compare the energy consumption of similar products b) Provide a certification to inform prospective purchasers c) Gives necessary information d) Target limits on energy performance
Last Answer : Allow consumers to compare the energy consumption of similar products
Description : Its …….. goal is to meet in said pattern by providing all the necessary data on the energy consumption as well as certain driving factors as identified during preliminary investigation. a. Secondary. c. Primary b. Tertiary. d. None.
Last Answer : primary
Description : 106.What type of data is useful to find out the fixed energy consumption? a) SEC Vs production b) SEC Vs Energy c) Production Vs energy d) None
Last Answer : Production Vs energy
Description : 105. Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None
Last Answer : Specific Energy Consumption
Description : 102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None
Last Answer : Monthly energy consumption& monthly production
Description : 92. Its …….. goal is to meet in said pattern by providing all the necessary data on the energy consumption as well as certain driving factors as identified during preliminary investigation. a. Secondary. c. Primary b. Tertiary. d. None
Description : 67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None
Description : Energy and production data is useful to calculate…… a) Specific Energy Consumption b) Specific Fuel consumption c) Specific Cost d) None
Description : One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) comparing the energy consumption C)Controlling the energy consumption d) Reducing the production
Last Answer : Reducing the production
Description : 68. One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) Comparing the energy consumption c) Controlling the energy consumption d) Reducing the production
Description : Bee star rating label just give _______ representation of the energy consumption levels byshowing star ratings. a. Physical c. Visual b. Both a and c d. None of the above
Last Answer : Visual
Description : Preheating of coal charge for the coke ovens reduces the (A) Time of carbonisation (B) Yield of gas and tar (C) Fuel consumption in coking (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Use of economiser in a boiler plant reduces the fuel consumption for steam generation by about __________ percent. (A) 1 (B) 10 (C) 30 (D) 50
Last Answer : (B) 10
Description : The application of plastic mulch? 1. Reduces the surface evaporation 2. Increases the yield of cabbage crop moisture 3.both of these 4. none of these
Last Answer : ans 3
Description : Energy consumption per unit of GDP is called as: a) Energy Ratio b) Energy intensity c) Per capita consumption d) None
Last Answer : Energy intensity
Description : An energy policy does not include a) Target energy consumption reduction b) Time period for reduction c) Declaration of top management commitment d) Future production projection
Last Answer : Future production projection
Description : is the Objective of the energy management from the following :- a) To give each product a label b) To evolve minimum energy consumption c) To minimize environmental effects d) To achieve optimum energy procurement
Last Answer : To evolve minimum energy consumption
Description : India‘s energy consumption growth in 2016 is a) 3.6% b) 4.6% c) 2.9% d) 1.5%
Last Answer : 4.6%
Description : Total primary energy consumption of fuel in the world is lead by a) Coal b) Nuclear c) Hydro d) Oil
Last Answer : coal
Description : As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts
Last Answer : kg
Description : As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts
Last Answer : kwh
Description : An energy policy does not include …… a) Target Energy Consumption Reduction b) Time Period for Reduction c) Declaration of top Management Commitment d) Future Production Projection
Last Answer : Future Production Projection
Description : Energy monitoring and targeting is built on the principle of ― ‖. a)production can be reduced to achieve reduced energy consumption‖ b)Consumption of energy is proportional to production rate‖ c)You cannot manage what you do not measure‖ d)None of the above
Last Answer : You cannot manage what you do not measure‖
Description : 103. What is specific energy consumption. a) energy consumption per month b) Energy consumed per unit of production c) energy consumption per year d) none of the above
Last Answer : Energy consumed per unit of production
Description : 99. As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts
Last Answer : kg.
Description : 95. As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts
Description : 79 State true or false. Nordic countries consumption of energy per capita is among the highest in the world. a) True b) False
Description : 78 India‘s total primary energy consumption is a) 24.3 BTU b) 19.01 BTU c) 120 BTU d) 30.1 BTU
Last Answer : 30.1 BTU
Description : 73. India‘s energy consumption growth in 2016 is a) 3.6% b) 4.6% c) 2.9% d) 1.5%
Description : 71. Total primary energy consumption of fuel in the world is lead by a) Coal b) Nuclear c) Hydro d) Oil
Description : 64. For any company, energy consumption mostly relates to…….. a) Profits b) Inventory c) Production d) All the above
Last Answer : Production
Description : Energy monitoring and targeting is built on the principle of ― _____‖ a) ―production can be reduced to achieve reduced energy consumption‖ b) ―Consumption of energy is proportional to production rate‖ c) ―You cannot manage what you do not measure‖ d) None of the above.
Last Answer : You cannot manage what you do not measure
Description : A critical feature of _______ is to understand what drives energy consumption. a) M&Y b) M&T c) T&M. d) C&V
Last Answer : m & t