As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts

As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts
by

1 Answer

Answer :

kwh
by

Related questions

95. As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts

Description : 95. As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts

Last Answer : kwh

As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Description : As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Last Answer : kg

99. As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Description : 99. As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Last Answer : kg.

Which one is not an energy consumption benchmark parameter? a) kcal/kWh of electricity generated b) kg/ oC. c) kW/ton of refrigeration d) kWh/kg of yarn

Description : Which one is not an energy consumption benchmark parameter? a) kcal/kWh of electricity generated b) kg/ oC. c) kW/ton of refrigeration d) kWh/kg of yarn

Last Answer : b) kg/ oC.

In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 TPD GCV of coal : 4500 kcal/kg Power Purchased from Grid : 82400 kWh / day Specific Energy consumption for Kiln producing Sponge Iron: 120 kWh / ton sponge iron Calculate the following 1. Specific Energy Consumption of Induction melting furnace in terms of kWh/ton of molten steel 2. Specific Energy Consumption of the entire plant, in terms of kcal/kg of molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace,  producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten  steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Last Answer :  a) Specific Energy Consumption of Induction Melting Furnace  Molten Steel Production from the Induction melting furnace per day  = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE  = 655864000/107  = 65.586 ToE

The coefficient of performance (COP) is the ratio between the:  A. Power consumption in watts and heat absorbed per hour  B. Heat absorbed per hour and the power consumption in watts  C. Work required and the absorbed heat  D. Absorbed heat and work required

Description : The coefficient of performance (COP) is the ratio between the:  A. Power consumption in watts and heat absorbed per hour  B. Heat absorbed per hour and the power consumption in watts  C. Work required and the absorbed heat  D. Absorbed heat and work required

Last Answer : Absorbed heat and work required

The specific fuel consumption for diesel engine is approximately A. 0.15 kg/kWh B. 0.2 kg/kWh C. 28 kg/kWh D. 0.36 kg/kWh

Description : The specific fuel consumption for diesel engine is approximately A. 0.15 kg/kWh B. 0.2 kg/kWh C. 28 kg/kWh D. 0.36 kg/kWh

Last Answer : ANSWER : B

At present, in terms of per capita energy consumption (kWh/year), identify the correct sequence. (A) Brazil > Russia > China > India (B) Russia > China > India > Brazil (C) Russia > China > Brazil > India (D) China > Russia > Brazil > India

Description : At present, in terms of per capita energy consumption (kWh/year), identify the correct sequence. (A) Brazil > Russia > China > India (B) Russia > China > India > Brazil (C) Russia > China > Brazil > India (D) China > Russia > Brazil > India

Last Answer : (C) Russia > China > Brazil > India

. Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Description : . Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Last Answer : (A) kW. sec/kg

According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Last Answer : ANSWER: D

According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Last Answer : ANSWER: D

According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in-----? A. 2 hours B. 5 hours C. 8 hours D. 10 hours (Answer)

Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in-----? A. 2 hours B. 5 hours C. 8 hours D. 10 hours (Answer)

Last Answer : D. 10 hours (Answer)

According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in------? A. 1 hours B. 5 hours C. 10 hours (Answer) D. 15 hours

Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in------? A. 1 hours B. 5 hours C. 10 hours (Answer) D. 15 hours

Last Answer : C. 10 hours (Answer)

102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Description : 102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Last Answer : Monthly energy consumption& monthly production

67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Description : 67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Last Answer : Monthly energy consumption& monthly production

How much do you pay per kilowatt-hour (kwh) for your electricity?

Description : How much do you pay per kilowatt-hour (kwh) for your electricity?

Last Answer : 1. there are three levels of pricing, depending on how much is used 0-700 =0.093 700-1000=0.157 over1000 = 0.175 per KWH in the summer. This varies seasonally 2. Northern California 3.Natural ... therms (seasonal) 0.968 above that 1.213 3. Gasoline for automobile $2.83.9 (yesterday, changes daily)

The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Description : The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Last Answer : (B) 400 - 700

In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant for the month Paper 1 –Set A with Solutions _______________________ Bureau of Energy Efficiency 6 is ------- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Description : In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant ... ----- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Last Answer : d) 60,000 kWh

The energy required per unit mass to grind limestone particles of very large size to 100 μm is 12.7 kWh/ton. An estimate (using Bond's law) of the energy to grind the particles from a very large size to 50 μm is (A) 6.35 kWh/ton (B) 9.0 kWh/ton (C) 18 kWh/ton (D) 25.4 kWh/ton

Description : The energy required per unit mass to grind limestone particles of very large size to 100 μm is 12.7 kWh/ton. An estimate (using Bond's law) of the energy to grind the particles from a very large size to 50 μm is (A) 6.35 kWh/ton (B) 9.0 kWh/ton (C) 18 kWh/ton (D) 25.4 kWh/ton

Last Answer : (C) 18 kWh/ton

Energy consumption per unit of GDP is called as: a) Energy Ratio b) Energy intensity c) Per capita consumption d) None

Description : Energy consumption per unit of GDP is called as: a) Energy Ratio b) Energy intensity c) Per capita consumption d) None

Last Answer : Energy intensity

103. What is specific energy consumption. a) energy consumption per month b) Energy consumed per unit of production c) energy consumption per year d) none of the above

Description : 103. What is specific energy consumption. a) energy consumption per month b) Energy consumed per unit of production c) energy consumption per year d) none of the above

Last Answer : Energy consumed per unit of production

The primary objective of energy audit is to determine ways to ______ energy consumption per unit of product output. A. Increase. C) Slightly increase. B. Reduce. D) Change.

Description : The primary objective of energy audit is to determine ways to ______ energy consumption per unit of product output. A. Increase. C) Slightly increase. B. Reduce. D) Change.

Last Answer : reduce

BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Description : BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Last Answer : savings in electricity consumption

India receives amount of solar energy each year a. 5×1010 kWh/year. c) 5×1015 kWh/year b. 4×1015 kWh/year. d) 5×1010 kWh/year

Description : India receives amount of solar energy each year a. 5×1010 kWh/year. c) 5×1015 kWh/year b. 4×1015 kWh/year. d) 5×1010 kWh/year

Last Answer : 5×1015 kWh/year

India receives amount of solar energy a) 5x1015 kwh/year b)5x1000 kwh/year c) 5x1012 kwh/year d) none of the above

Description : India receives amount of solar energy a) 5x1015 kwh/year b)5x1000 kwh/year c) 5x1012 kwh/year d) none of the above

Last Answer : 5x1015 kwh/year

For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor

Last Answer :  Energy Index parameter 

19. For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor c) Production factor d) Load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor c) Production factor d) Load factor

Last Answer : Utility factor

For a cement plant the parameter, ―kWh/MT of clinker ―indicates c) Energy Index parameter c) Production factor d) Utility factor d) load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates c) Energy Index parameter c) Production factor d) Utility factor d) load factor

Last Answer :  Energy Index parameter

For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter c) Production factor b) Utility factor d) load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter c) Production factor b) Utility factor d) load factor

Last Answer : Energy Index parameter

Is 10.9 cents/kwh a good electricity rate?

Description : Is 10.9 cents/kwh a good electricity rate?

Last Answer : Depends on where you live. Check this site: http://www.eia.doe.gov/cneaf/electricity/epm/table5_6_a.html

The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Description : The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Last Answer : ANSWER: A

The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Description : The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Last Answer : ANSWER: A

The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Description : The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Last Answer : ANSWER: A

Production of one ton of paper in Indian paper industry consumes about __________ kWh of electricity. (A) 300 (B) 800 (C) 1400 (D) 2000

Description : Production of one ton of paper in Indian paper industry consumes about __________ kWh of electricity. (A) 300 (B) 800 (C) 1400 (D) 2000

Last Answer : (C) 1400

74. Inverter tech AC if usage of AC is more than 1000 hour in a year and per unit cost of electricity is more than rs _________per unit. a) 10 c) 5 b) 7 d) 4

Description : 74. Inverter tech AC if usage of AC is more than 1000 hour in a year and per unit cost of electricity is more than rs _________per unit. a) 10 c) 5 b) 7 d) 4

Last Answer : 5

Kilowatt-hour (KWH) is the unit of - (1) power (2) resistance (3) resistivity (4) energy

Description : Kilowatt-hour (KWH) is the unit of - (1) power (2) resistance (3) resistivity (4) energy

Last Answer : (4) energy Explanation: The kilowatt hour (symbol kWh, kW h or kW h) is a unit of energy equal to 3.6 megajoules. If the energy is being transmitted or used at a constant rate (power) over a period of time, the total energy in kilowatt hours is the power in kilowatts multiplied by the time in hours.

The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Description : The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Last Answer : Answer : c

Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement operation (D) Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Description : As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Last Answer : 18

As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Description : 96.As per the case study of the CUSUM technique energy consumption and the production data were collected for plant over a period of months. a. 20. c. 19 b. 6. d. 18

Last Answer : 18

79 State true or false. Nordic countries consumption of energy per capita is among the highest in the world. a) True b) False

Description : 79 State true or false. Nordic countries consumption of energy per capita is among the highest in the world. a) True b) False

Last Answer : true

How do you create a pie chart in iWork's Numbers?

Description : How do you create a pie chart in iWork's Numbers?

Last Answer : Select the data and click “Charts” at the top. Select the image of the pie graph. Alternatively, select the data and go to Insert -> Chart -> Pie

Is there a way to create a pie chart of the websites I spend my time on in Safari?

Description : Is there a way to create a pie chart of the websites I spend my time on in Safari?

Last Answer : Rescuetime.

The pie chart given below shows the production of manganese in different states. -SST 10th

Description : The pie chart given below shows the production of manganese in different states. -SST 10th

Last Answer : 1. Uses of Manganese: (i) Manganese is mainly used in the manufacturing of steel and ferro-manganese alloy. Nearly 10 kg of manganese is required to manufacture one tonne of steel. (ii) ... is the largest producer of manganese ores in India approximately one-third of the country's total production.

what is the key called in pie chart'?

Description : what is the key called in pie chart'?

Last Answer : what is a key called in a pie chart

XI. Answer any TWO of the following questions.47) On the basis of data you have collected regarding participation of women in your locality in below mentioned catagories construct a pie chart.a) Self employed.b) Regular salaried employees.c) Causel wage labours.

Description : XI. Answer any TWO of the following questions.47) On the basis of data you have collected regarding participation of women in your locality in below mentioned catagories construct a pie chart.a) Self employed.b) Regular salaried employees.c) Causel wage labours.

Last Answer : XI. Answer any TWO of the following questions. 47) On the basis of data you have ... Regular salaried employees. c) Causel wage labours.

In a pie chart, the central angles of two components A and B are `108^(@)` and `81^(@)`, rspectively. Find the difference in the presentages that A fo

Description : In a pie chart, the central angles of two components A and B are `108^(@)` and `81^(@)`, rspectively. Find the difference in the presentages that A fo

Last Answer : In a pie chart, the central angles of two components A and B are `108^(@)` and `81^(@)`, ... B forms of the total value of all components (in %).

Find the central angles of the components of a data given below, when represented in a pie chart ? `{:(bar("Component Food Education Rent Clothing Sav

Description : Find the central angles of the components of a data given below, when represented in a pie chart ? `{:(bar("Component Food Education Rent Clothing Sav

Last Answer : Find the central angles of the components of a data given below, when represented in a pie chart ? `{:( ... Rs.) 3600 2400 2100 1200 1500 10800")):}`

In a pie chart, a component is represented as a sector with sector angle `108^(@)`, then find the percentage of the value the component totally.

Description : In a pie chart, a component is represented as a sector with sector angle `108^(@)`, then find the percentage of the value the component totally.

Last Answer : In a pie chart, a component is represented as a sector with sector angle `108^(@)`, then find the percentage of the value the component totally.

In a pie chart, the central angle for a component value of 240, when the total value is 720, is ______.

Description : In a pie chart, the central angle for a component value of 240, when the total value is 720, is ______.

Last Answer : In a pie chart, the central angle for a component value of 240, when the total value is 720, is ______.